Dell E6400 ATG user manual

User manual for the device Dell E6400 ATG

Device: Dell E6400 ATG
Category: Laptop
Manufacturer: Dell
Size: 3.28 MB
Added : 7/1/2014
Number of pages: 99
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Dell E6400 ATG. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Dell E6400 ATG.

For your convenience

If looking through the Dell E6400 ATG user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Dell E6400 ATG on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Dell E6400 ATG to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Dell E6400 ATG User manual - Online PDF
Advertisement
« Page 1 of 99 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Dell E6400 ATG but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Dell E6400 ATG. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Dell™ Latitude™ E6400 and E6400 ATG and 
Mobile Workstation Precision™ M2400 Service Manual
Troubleshooting LED Cover
Working on Your Computer Keyboard
Base Assembly Modem
Hinge Covers Right Speaker Grill/Fingerprint Reader Assembly
Hard Drive Palm Rest Assembly
WLAN/WiMax Card Card Cage
WWAN Card 1394 Card
WPAN (UWB/BT) Card RJ-11 Modem Connector
FCM System Board Assembly
Fan I/O Card
Processor Heatsink Assembly DC Power Cable
Processor Module Battery Latch A

Summary of the content on the page No. 2

Back to Contents Page   1394 Card Dell™ Latitude™ E6400 and E6400 ATG and  Mobile Workstation Precision™ M2400 Service Manual   Removing the 1394 Card   Replacing the 1394 Card  Removing the 1394 Card   CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.   1. Follow the instructions in Before Working on Your Computer.   2. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly).

Summary of the content on the page No. 3

 Replacing the 1394 Card   CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.   1. Insert the 1394 card at a 45-degree angle to fit the connector into the base assembly. Use the alignment pins to seat into position.   2. Replace the two M2 x 3 screws.   3. Route and connect the 1394 cable to the system board.   4. Replace the card cage (see Replacing the Card Cage).   5. Replace the palm rest assembly (R

Summary of the content on the page No. 4

Back to Contents Page   Base Assembly Dell™ Latitude™ E6400 and E6400 ATG and  Mobile Workstation Precision™ M2400 Service Manual   Removing the Bottom of the Base Assembly   Replacing the Bottom of the Base Assembly   Removing the Base Assembly   Replacing the Base Assembly   CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.  Removing the Bottom of the Base Assembly   1. Follow the procedures in

Summary of the content on the page No. 5

  5. Remove the hinge covers (see Removing the Hinge Covers).   6. Remove the card from the WPAN/UWB/FCM card slot, if present (see Removing a WPAN (UWB/BT) Card or Removing an FCM from the WPAN/UWB/FCM Slot).   7. Remove the heatsink assembly (see Removing the Processor Heatsink Assembly).   8. Remove the hard drive (see Removing the Hard Drive).   9. Remove the modular drive (see Removing the Modular Drive).   10. Remove the display assembly (see Removing the D

Summary of the content on the page No. 6

  16. Replace the hinge covers (see Replacing the Hinge Covers).   17. Replace the card from the WLAN/WiMax card slot, if applicable (see Replacing the WLAN/WiMax Card).   18. Replace the card from the WWAN/FCM card slot, if applicable (see Replacing a WWAN Card or Replacing an FCM).   19. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly).   20. Follow the procedures in After Working on Your Computer. NOTE: If you use a BIOS up

Summary of the content on the page No. 7

Back to Contents Page   Battery Latch Assembly Dell™ Latitude™ E6400 and E6400 ATG and  Mobile Workstation Precision™ M2400 Service Manual   Removing a Battery Latch Assembly   Replacing the Battery Latch Assembly There are two battery latches, a left and a right, and each latch uses a unique latch assembly. The spring, screw, and release buttons are the same for the left and right battery latches. The removing and replacing procedures are primarily the same for the right and the l

Summary of the content on the page No. 8

1 spring 2 alignment bracket 3 M2 x 3-mm screws (2) 4 battery release button 5 base assembly      Replacing the Battery Latch Assembly   CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.   1. Place the spring on the alignment bracket.   2. Place the battery release button underneath the base assembly. For the right battery latch assembly, slide the alignment bracket to the left to align the button with the hole

Summary of the content on the page No. 9

17. Replace the hard drive (see Replacing the Hard Drive).   18. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly).   19. Follow the procedures in After Working on Your Computer. Back to Contents Page  

Summary of the content on the page No. 10

Back to Contents Page   Working on Your Computer Dell™ Latitude™ E6400 and E6400 ATG and  Mobile Workstation Precision™ M2400 Service Manual   Recommended Tools   Before Working on Your Computer   After Working on Your Computer This document provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that: l  You have performed the steps in Before Working on Your Computer. l  You have read the safety informatio

Summary of the content on the page No. 11

  7. Slide the battery out of the battery bay. 1 battery 2 battery release latches (2)   8. Disconnect any external devices and remove any installed cards before working on your computer: l  To remove any installed cards, such as an ExpressCard, see the Dell™ Technology Guide on your computer or at support.dell.com. l  To undock from a docking station, see the E-Port User's Guide or the E-Port Plus User's Guide on support.dell.com. l  To remove a battery slice, see the docum

Summary of the content on the page No. 12

  4. Replace the battery. Slide the battery into the battery bay until it clicks into place.   5. Connect your computer and all attached devices to their electrical outlets.   6. Turn on your computer. Back to Contents Page  

Summary of the content on the page No. 13

Back to Contents Page   Flashing the BIOS Dell™ Latitude™ E6400 and E6400 ATG and  Mobile Workstation Precision™ M2400 Service Manual   Flashing the BIOS From a CD   Flashing the BIOS From the Hard Drive If a BIOS-update program CD is provided with a new system board, flash the BIOS from the CD. If you do not have a BIOS-update program CD, flash the BIOS from the hard drive.  Flashing the BIOS From a CD NOTICE: Plug the AC adapter into a known good power source to prevent a loss

Summary of the content on the page No. 14

Summary of the content on the page No. 15

Back to Contents Page   Card Cage Dell™ Latitude™ E6400 and E6400 ATG and  Mobile Workstation Precision™ M2400 Service Manual   Removing the Card Cage   Replacing the Card Cage  Removing the Card Cage   CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.   1. Follow the procedures in Before Working on Your Computer.   2. Remove the bottom of the base assembly (see Removing the Bottom of the Base A

Summary of the content on the page No. 16

  CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.   1. Holding the card cage at a 45-degree angle, attach the front of the card cage to the base assembly, then lower the card cage into place.   2. Replace the two M2 x 3 screws. 1 M2 x 3 screws (2) 2 base assembly 3 front of card cage       3. Replace the palm rest assembly (Replacing the Palm Rest Assembly).   4. Replace the right speaker gr

Summary of the content on the page No. 17

Back to Contents Page   Coin-Cell Battery Dell™ Latitude™ E6400 and E6400 ATG and  Mobile Workstation Precision™ M2400 Service Manual   Removing the Coin-Cell Battery   Replacing the Coin-Cell Battery  Removing the Coin-Cell Battery   CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.   1. Follow the procedures in Before Working on Your Computer.   2. Remove the bottom of the base assembly (see R

Summary of the content on the page No. 18

1 coin-cell battery 2 coin-cell battery cable   3. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly).   4. Follow the procedures in After Working on Your Computer. Back to Contents Page  

Summary of the content on the page No. 19

Back to Contents Page   Processor Module Dell™ Latitude™ E6400 and E6400 ATG and  Mobile Workstation Precision™ M2400 Service Manual   Removing the Processor Module   Replacing the Processor Module  Removing the Processor Module   CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.   1. Follow the instructions in Before Working on Your Computer.   2. Remove the bottom of the computer (see Removing the Bottom of

Summary of the content on the page No. 20

  5. Lift the processor module from the ZIF socket.  Replacing the Processor Module   CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. NOTICE: Do not touch the processor die. Press and hold the processor down on the substrate on which the die is mounted while turning the cam screw to prevent intermittent contact between the cam screw and processor. NOTICE: Ensure that the cam lock is in the fully open position before s


Alternative user manuals
# User manual Category Download
1 Dell 1090 User manual Laptop 194
2 Dell 1120 User manual Laptop 28
3 Dell 1011 User manual Laptop 33
4 Dell 1088 User manual Laptop 11
5 Dell 1018 User manual Laptop 16
6 Dell 1012 User manual Laptop 16
7 Dell 1121 User manual Laptop 7
8 Dell 11 User manual Laptop 16
9 Dell 1015 User manual Laptop 38
10 Dell 1014 User manual Laptop 6
11 Dell 120L User manual Laptop 10
12 Dell 1150 User manual Laptop 12
13 Dell 1220 User manual Laptop 30
14 Dell 131L User manual Laptop 10
15 Dell 1427 User manual Laptop 10
16 Sony CG-FX120K User manual Laptop 13
17 Sony FX120K User manual Laptop 8
18 Sony DG1 User manual Laptop 4
19 Sony BX540-BTO User manual Laptop 2
20 Sony FX150K User manual Laptop 2