Furuno MARINE RADAR GD-1900C user manual

User manual for the device Furuno MARINE RADAR GD-1900C

Device: Furuno MARINE RADAR GD-1900C
Category: Marine GPS System
Manufacturer: Furuno
Size: 5.19 MB
Added : 10/6/2014
Number of pages: 100
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Furuno MARINE RADAR GD-1900C. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Furuno MARINE RADAR GD-1900C.

For your convenience

If looking through the Furuno MARINE RADAR GD-1900C user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Furuno MARINE RADAR GD-1900C on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Furuno MARINE RADAR GD-1900C to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Furuno MARINE RADAR GD-1900C User manual - Online PDF
Advertisement
« Page 1 of 100 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Furuno MARINE RADAR GD-1900C but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Furuno MARINE RADAR GD-1900C. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

MARINE RADAR MODEL1823C
MARINE RADAR MODEL1833C
MARINE RADAR MODEL1933C
MARINE RADAR MODEL1943C
MARINE RADAR MODEL1953C
COLOR VIDEO PLOTTER GD-1900C
PRINTED IN JAPAN

Summary of the content on the page No. 2

Y Your our Local Local A Age gent nt//D De eal ale er r 9- 9-52 52 A Ashi shihar hara- a-cho, cho, N Niishi shinom nomiiy ya 662- a 662-8580, 8580, J JAPAN APAN Te Telle ep phone hone : : 0798- 0798-65- 65-2111 2111 Fax Fax 0798- 0798-65- 65-4200 4200 :: FIR FIRS ST E T ED DITION ITION : : APR APR. . 2001 2001 A All r ll riig gh ht ts r s re ese ser rv ve ed d. . P Pr rinte inted in J d in Ja apa pan n P P ::MAY. MAY. 20, 20, 2005 2005 P Pub. ub. No. No. I IM ME E- -35030- 35030-P P **000

Summary of the content on the page No. 3

SAFETY INSTRUCTIONS WARNING WARNING Do not open the equipment Radio Frequency unless totally familiar with Radiation Hazard electrical circuits and service manual. The radar antenna emits electromagnetic radio frequency (RF) energy which can be Only qualified personnel ELECTRICAL harmful, particularly to your eyes. Never should work inside the SHOCK look directly into the antenna aperture from HAZARD equipment. a close distance while the radar is in operation or expose

Summary of the content on the page No. 4

TABLE OF CONTENTS SAFETY INSTRUCTIONS........................................................................................ i EQUIPMENT LISTS ................................................................................................. iii SYSTEM CONFIGURATIONS.................................................................................. v 1. MOUNTING .......................................................................................................... 1-1 1.1 Installation o

Summary of the content on the page No. 5

EQUIPMENT LISTS Standard supply Name Type Code No. Qty Remarks RDP-138* - Normal bright LCD, 300 Cd Display unit 1 RDP-139 - High bright LCD, 700 Cd RSB-0094-0075 - MODEL 1823C RSB-0071-057 - MODEL 1833C MODEL1933C, XN10A-RSB-0070-064 - 24 rpm, for RDP-138/139 MODEL1933C, XN10A-RSB-0073-064 - Antenna unit 1 48 rpm, for RDP-138 XN12A-RSB-0070-059 - MODEL1943C, 24 rpm XN12A-RSB-0073-059 - MODEL1943C, 48 rpm XN12A-RSB-0072-060 - MODEL1953C, 4”, 24 rpm XN12A-RSB-0073-060 - MOD

Summary of the content on the page No. 6

Optional supply Name Type Code No. Qty Remarks 000-013-484 For GD-1900C, 100 VAC 000-013-485 For GD-1900C, 110 VAC PR-62 1 Rectifier 000-013-486 For GD-1900C, 220 VAC 000-013-487 For GD-1900C, 230 VAC RU-3423 000-030-443 1 For MODEL series External buzzer OP03-136 000-086-443 1 MJ-A6SPF0014-010 000-144-421 1 For NavNet, 1 m MJ-A6SPF0014-050 000-144-422 1 For NavNet, 5 m MJ-A6SPF0014-100 000-144-423 1 For NavNet, 10 m MJ-A6SPF0014-200 000-144-424 1 For NavNet, 20 m MJ-A6SPF0014-30

Summary of the content on the page No. 7

SYSTEM CONFIGURATIONS All NavNet products incorporate a “network circuit board” to integrate each NavNet product on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is assigned an IP address to enable transfer of images between other NavNet products. For example, video plotter pictures can be transferred to a radar and vice versa. Pictures received via the NavNet may be adjusted at the receiving end. The number of display units which may be installed depen

Summary of the content on the page No. 8

GPS receiver GP-310B/320B External buzzer PC Echo sounder VGA monitor Remote display Remote Video equipment Controller Memory card RMC-100 interface unit CU-200 Display unit RDP-138/139 12 VDC Echosounder Navigator Other NavNet Unit (Model 1833C, etc.) Rectifier PR-62 12 - 24 VDC Facsimile Network Sounder Receiver ETR-6/10N FAX-30 ETR-30N Ship's mains 100/110/115/220/230 VAC 1φ, 50/60 Hz : Standard : Option Figure 1 (b) NavNet system (GD-1900C) vi

Summary of the content on the page No. 9

Figure 2 (a) NavNet system, three-unit connection Radar Antenna Unit Radar Antenna Unit OR OR GPS Receiver GP-310B/320B GPS Receiver GP-310B/320B RADAR RADAR or or PLOTTER PLOTTER Radar data Plotter data HUB Sounder data Sounder data Note: The picture disappears Facsimile 10 seconds after the NavNet data cable is disconnected from a "sub" NavNet display unit. Network Sounder Facsimile Network Sounder ETR-6/10N Receiver ETR-6/10N ETR-30N FAX-30 ETR-30N (option) (option) (option) Figure 2

Summary of the content on the page No. 10

This page is intentionally left blank. viii

Summary of the content on the page No. 11

1. MOUNTING 1.1 Installation of Display Unit The display unit can be installed on a tabletop, on the overhead or flush mounted in a console or panel. Tabletop, overhead mounting method When selecting a mounting location for the display unit keep the following in mind: • Keep the display unit out of direct sunlight. • The temperature and humidity should be moderate and stable. • Locate the unit away from exhaust pipes and vents. • The mounting location should be well ventilated. •

Summary of the content on the page No. 12

1.1.1 Mounting procedure Tabletop, overhead mounting Follow the procedure below to mount the display unit on a tabletop or the overhead. 1. Fix the hanger by four tapping screw (5x20). 2. Screw knob bolts in display unit, set it to hanger, and tighten knob bolts. 3. Attach hard cover to protect LCD. Display unit Tapping screws (4 pcs.) Knob bolts (2 pcs.) Hanger Tabletop, overhead mounting of display unit Note: For the overhead mounting, reinforce the mounting location and secur

Summary of the content on the page No. 13

Flush mounting Note: Use supplied six pan head screws when the thickness of the bulkhead is from 11 to 14 mm. For bulkhead which exceeds 14 mm in thickness the length of the pan head screws should be bulkhead thickness (A) plus 7.8±2 mm. Also the length of B should be max. 8 mm. B A A: thickness of bulkhead Fixing screw, side view 1. Prepare a cutout in the mounting location by using the template sheet supplied as the installation material. 2. Fix the display unit by six washer head

Summary of the content on the page No. 14

1.2 Mounting of Antenna Unit for MODEL1833C 1.2.1 Mounting considerations When selecting a mounting location for the antenna unit keep in mind the following points. • Install the antenna unit on the hardtop, radar arch or on a mast on an appropriate platform. (For sailboats, a mounting bracket is optionally available.) It should be placed where there is a good all-round view with, as far as possible, no part of the ship’s superstructure or rigging intercepting the scanning beam. Any ob

Summary of the content on the page No. 15

1.2.2 Mounting antenna unit of MODEL 1833C 1. Open the antenna unit packing box carefully. 2. Unbolt the four bolts at the base of the radome to remove the radome cover. Radome cover Antenna unit The mounting surface must be parallel with the waterline and provided with five holes (four fixing holes and one cable entry) whose dimensions are shown in the outline drawing attached at the end of this manual. The unit is adjusted so a target echo returned from the bow direction will

Summary of the content on the page No. 16

Antenna base plate Effective Gasket thread length Radome 25 mm 5 - 10 mm Flat washer Spring Platform washer M10 x 25 Apply silicone sealant. Hex bolt How to fasten the radome base to the mounting platform Wiring and final preparation 4. Drill a hole of at least 20 millimeters diameter through the deck or bulkhead to run the signal cable between the antenna unit and the display unit. (To prevent electrical interference avoid running the signal cable near other electrical equipment and i

Summary of the content on the page No. 17

9. Attach three connectors of the signal cable to respective ports as shown below. to one of the screws of the cable clamping plate 9-pin connector: to J801 on MD-9208 4-pin connector: to J802 on MD-9208 13-pin connector: to J611 on IF-9214 Signal cable, antenna unit side J802 J801 MD-9208 Cable entry PTU-9335 J611 IF-9214 RF unit 1-7

Summary of the content on the page No. 18

10. Attach the EMI cores supplied as shown below. J801 J802 MD-9208 J805 J804 J806 J803 Cable entrance Cable Motor clamping plate EMI core E04SS251512 (Above cable J1 clamping plate) J613 PTU-9335 IF9214A IF9214 J611 How to attach EMI core 11. Fix the shield cover. Do not pinch the cable. 12. Attach the radome cover, aligning triangle mark on radome cover with that on radome base. Radome cover Radome base How to position the radome cover 13. Loosely fasten the radome fixing bolts. Yo

Summary of the content on the page No. 19

1.2.3 Mounting the optional mounting bracket A mounting bracket for fastening the antenna unit for MODEL1833C to a mast on a sailboat is optionally available. Mounting bracket 1 Type: OP03-92 Code No.: 008-445-070 Table 1-1 Mounting bracket contents Type Code No. Qty Hex. bolt M4X12 000-804-725 4 Hex. bolt M8X20 000-805-707 8 Mounting plate 03-018-9001-0 100-206-740 1 Support plate (1) 03-018-9005-0 100-206-780 1 Support plate (2) 03-018-9006-0 100-206-790 1 Bracket (1) 03-01

Summary of the content on the page No. 20

M8 x 20 Mounting plate M8 x 20 Bracket (1) Fixing plate Support plate (2) Bracket (2) Support plate (1) M8 x 20 M4 x 12 (A) Assembling the mounting bracket M10 x 25 (supplied with antenna unit) (B) Fastening antenna to mounting bracket How to assemble and mount the optional mounting bracket 1-10


Alternative user manuals
# User manual Category Download
1 Furuno 2105 User manual Marine GPS System 7
2 Furuno GD-3100 User manual Marine GPS System 41
3 Furuno GD-188 User manual Marine GPS System 8
4 Furuno GD-3300 User manual Marine GPS System 118
5 Furuno GP-1600F User manual Marine GPS System 55
6 Furuno GP-1870F User manual Marine GPS System 988
7 Furuno FEA-2100 User manual Marine GPS System 1
8 Furuno GP-1800F User manual Marine GPS System 4
9 Furuno GP-1650W User manual Marine GPS System 154
10 Furuno GP-1610CF User manual Marine GPS System 319
11 Furuno GP-1250 User manual Marine GPS System 68
12 Furuno GP-1650WD User manual Marine GPS System 0
13 Furuno GP-1800 User manual Marine GPS System 20
14 Furuno GP-1810 User manual Marine GPS System 15
15 Furuno GP-1850 User manual Marine GPS System 114
16 Sony MZ-B100 User manual Marine GPS System 19
17 ACR Electronics Nauticast Y1-03-0222 User manual Marine GPS System 0
18 ACR Electronics MicroFix 2898 User manual Marine GPS System 5
19 ACR Electronics ResQFix PLB-300 User manual Marine GPS System 8
20 ACR Electronics Mini B300 Y1-03-0167 User manual Marine GPS System 2