Nortel Networks m7310 user manual

Summary of the content on the page No. 1

Enterprise Edge
M7310
Quick Reference Guide
© 2000 Nortel Networks
P0908513 Issue 03

Summary of the content on the page No. 2

Summary of the content on the page No. 3

Your Enterprise Edge M7310 Telephone Shift button For using the top function of a dual-memory button. Display shows the time, date, call information, and guides you. The lower line of the display is reserved for display button instructions. Dual-memory buttons store any two features and/or autodial numbers. Display buttons Feature button starts or ends a feature. Release button cancels active calls. Hold button Dial pad Memory and line buttons are buttons with indicators for one touch dialing, f

Summary of the content on the page No. 4

Making and answering calls Answering Answering calls using the handset calls When your telephone rings, or ¼ flashes beside an Intercom or line button: 1. Lift the handset. OR Press the button beside the flashing ¼ before lifting the handset. Answering calls using Handsfree When your telephone rings, or ¼ flashes beside an Intercom or line button: 1. Press ©. Making calls Depending upon the dialing mode programmed on your telephone, you may have to lift the handset before making a call. Â Ex

Summary of the content on the page No. 5

Making and answering calls continued © System Administrator can program Handsfree for your telephone. Switching between Handsfree and handset 1. Press © and replace the handset to switch to Handsfree. 2. Pick up the handset to switch back. Using Mute 1. Press ©microphone OFF. 2. Press © again to turn the microphone ON. Making calls using Handsfree Press © instead of lifting the handset. Notice This telephone now conforms to the latest standards in relation to the positioning of Q and Z on the n

Summary of the content on the page No. 6

Programming memory buttons About memory buttons Memory buttons store telephone numbers or feature codes to give you one-touch dialling or feature activation. To use the top function, press the shift button, then press the dual-memory button. There are two types of memory buttons: single-memory and dual-memory. Dual-memory buttons: To use the bottom function, press the dual-memory button. Single-memory buttons: Single-memory buttons are the buttons with indicators other than line or H

Summary of the content on the page No. 7

Setting up the telephone ATTENTION Before attempting to carry Connecting the cords out any work on the telephone, ensure that the line cord is unplugged from the wall socket. To remove any of the cords, squeeze the release latch on the plug and gently pull the plug from the socket. Connect the handset cord to the jack labelled with the telephone icon and route the cord as shown. If you are using a headset, route the cord Connect to jack from distribution block along the channel in the

Summary of the content on the page No. 8

Setting up the telephone Mounting the telephone on the wall Page 6 Enterprise Edge M7310 Quick Reference Guide P0908513 Issue 03