Chauvet F-1050 user manual

Summary of the content on the page No. 1

Troubleshooting
If you experience low output, pump noise or no output at all, unplug immediately. Check fluid level, the
external fuse, remote connection and main power supply. If all appear to be OK, plug the unit in again. If
fog does not come out after holding the remote control button for 30 seconds, check the hose attached to
the tank to make sure there is fluid going through the hose. If you are unable to determine the cause of the
problem, do not simply continue to push the remote control

Summary of the content on the page No. 2

touching. Dealer Stamp Model: F-1050 Fog Machine · Never use any other type of liquid other than UNSCENTED water based fog fluid. • Fog Fluid Tank On the Rear · Use of any other fluids or additives will void the warranty. • Eyebolt for Safety Cable • Remote Control and Cable Controlling the F-1050 • Manual Fog Button • Socket for Remote Control • Ready to Fog Lamp 1. The F-1050 has a fog button located on the top of the unit. • On/Off Switch 2. FC-4M Timer remote - Remove the thumb screws holdi

Summary of the content on the page No. 3

Work on internal parts should be carried out by a qualified technician. Removal of any covers is considered a breach of warranty and will not be covered under any such agreement unless authorized first by Chauvet.