Hoover H-FREE-100-HF122GPT-011 user manual

There could be several reasons why your Hoover Freedom vacuum cleaner is not charging. Here are a few possible explanations:
1. Faulty power outlet or charging station: Make sure the power outlet you are using is functioning properly. Try using a different outlet or charging station to see if that resolves the issue.
2. Loose connection: Check if the charging cable is securely connected to both the Hoover Freedom vacuum and the power source. Sometimes, slight movements or disconnections can prevent proper charging.
3. Charging cable or adapter issue: Inspect the charging cable and adapter for any visible damages or defects. If you notice any issues, you may need to replace the cable or adapter.
4. Battery issue: Over time, the battery of your Hoover Freedom vacuum may lose its ability to hold a charge. If your vacuum cleaner is not relatively new, the battery might need to be replaced.
5. Charging indicator: Check if the charging indicator light on the vacuum cleaner turns on when connected to the power source. If the light doesn't illuminate, it could indicate a problem with the charging mechanism or internal circuitry.
If none of these suggestions seem to fix the problem, it might be necessary to contact Hoover customer support or consult the user manual for further assistance.

The Hoover H-Free 100 HF122GPT-011 generally takes about 5 hours to charge fully. However, it is always recommended to refer to the specific user manual or manufacturer's instructions for accurate information on charging times.

There could be several reasons why your Hoover stick vacuum is not working. Here are some troubleshooting steps you can try:
1. Check the power source: Ensure that the vacuum is properly plugged into a functioning power outlet. If it is a cordless vacuum, make sure the battery is fully charged.
2. Inspect the power button: Make sure the power button is functioning correctly. Press it firmly to ensure it is activating the vacuum.
3. Clear any blockages: Check the brush head and nozzle for any clogs or blockages. Clear out any debris that may be obstructing the airflow.
4. Clean or replace the filter: A clogged filter can restrict airflow and impact the vacuum's performance. Clean or replace the filter according to the manufacturer's instructions.
5. Empty the dustbin: If the dustbin is full, it can prevent proper suction. Empty the dustbin and clean it thoroughly before reattaching it to the vacuum.
6. Check for damaged parts: Inspect the vacuum for any visible damage to the brush head, hose, or other components. If any parts are damaged, contact Hoover customer support for assistance.
If none of these troubleshooting steps resolve the issue, it may be necessary to contact Hoover customer support or take the vacuum to an authorized service center for further diagnosis and repair.

The Hoover H-Free 100 has a charging time of approximately 6 hours to fully charge.