Hoover WINDTUNNEL-3-PRO-PET-UH70935 user manual

Yes, there is a reset button on the Hoover Windtunnel vacuum cleaner. The location of the reset button may vary depending on the specific model, but it is typically located on the side of the vacuum near the motor. You may need to remove a small cover or panel to access the reset button.

There could be several reasons why your Hoover WindTunnel 3 Pro Pet vacuum cleaner has no suction. Here are some common causes:
1. Clogged Hose or Brush Roll: Check the hose, brush roll, and nozzle for any clogs or blockages. Remove any debris that may be obstructing the flow of air.
2. Full Dust Bin or Filter: If the dust bin or filter is full, it can restrict the airflow and reduce suction. Empty the dust bin and clean or replace the filter as recommended by the manufacturer.
3. Damaged or Worn Out Hose or Brush Roll: Inspect the hose and brush roll for any damage, such as cracks or tears. If they are worn out or damaged, they may need to be replaced to restore suction.
4. Improperly Secured or Damaged Seals: Check the seals on the dust bin, nozzle, and hose connections. If they are improperly secured or damaged, they can cause air leaks and reduce suction power.
5. Motor Issues: If none of the above solutions work, there could be an issue with the motor itself. This may require professional repair or contacting the manufacturer for assistance.
It's important to consult the user manual for specific troubleshooting instructions for your model of Hoover vacuum cleaner.