iHome IBT155 user manual

There could be several reasons why your iHome IBT155 is not connecting to Bluetooth. Here are a few troubleshooting steps you can try:
1. Ensure Bluetooth is turned on: Make sure that Bluetooth is enabled on your device (phone, tablet, etc.) and that it is in discoverable mode.
2. Reset the iHome speaker: Disconnect the power source from your iHome speaker and wait for a few minutes before reconnecting it. This can help reset any temporary glitches.
3. Delete and re-pair Bluetooth connection: Go to the Bluetooth settings on your device and delete the iHome speaker from the list of paired devices. Then try pairing it again from scratch.
4. Clear Bluetooth cache: On your device, clear the Bluetooth cache by going to the Bluetooth settings and selecting "Clear Cache." This can help resolve any issues related to stored connection data.
5. Check distance and obstacles: Ensure that your iHome speaker and the device you are trying to connect with are within a reasonable range. Additionally, minimize any physical obstructions or interference that may weaken the Bluetooth signal.
6. Update firmware: Visit the iHome website or contact their customer support to check if there are any firmware updates available for your specific model. Updating the firmware can often fix compatibility issues.
If none of these solutions work, it may be a hardware issue with your iHome speaker. In that case, reaching out to iHome customer support for further assistance or possibly seeking a repair or replacement would be recommended.

To check the battery status of your iHome iBT155, follow these steps:
1. Look for the "Battery" icon on the screen of your iHome iBT155. It might be located in one of the corners or on the main display.
2. If you see the "Battery" icon, tap on it to view the battery status. It should display the remaining battery percentage or an indicator showing the battery level.
3. If your iHome iBT155 doesn't have a visible battery icon, you can also check the battery status using the iHome Control app. Download and install the iHome Control app from the App Store or Google Play Store, depending on your device.
4. Open the iHome Control app and connect it to your iBT155 speaker.
5. Once connected, navigate to the "Device Settings" or "Speaker Settings" section within the app. Look for the battery status or battery level information.
By following these steps, you should be able to check the battery status of your iHome iBT155 speaker either on the device itself or through the iHome Control app.

To program your iHome iBT155 speaker, follow these steps:
1. Make sure your iHome speaker is turned on and in pairing mode (usually indicated by a flashing Bluetooth or pairing LED light).
. On your phone or other Bluetooth-enabled device, go to the settings menu and turn on Bluetooth.
3. Your device should start searching for nearby Bluetooth devices. Look for your iHome speaker in the list of available devices and select it.
4. If prompted, enter the correct PIN or passkey. The default passkey for iHome speakers is usually "0000" or "1234".
5. Once connected, your device should confirm the successful pairing with a notification or sound.
6. Play any audio or music on your device, and it should now be played through your iHome speaker.
If you're experiencing any issues with pairing, make sure that your iHome speaker is within range and that no other devices are connected to it. You may need to consult the user manual that came with your specific iHome model for more detailed instructions.

To check if your iHome iBT155 speaker is charging, you can follow these steps:
1. Connect the speaker to a power source using the provided USB charging cable.
. Look for a small LED light on the speaker. If the speaker is charging, the LED light should illuminate.
3. Depending on the model, the LED light may be located on the side, bottom, or front of the speaker. Refer to the user manual for the specific location of the LED light.
4. The LED light may flash or remain solid, indicating that the speaker is receiving power and charging.
5. Leave the speaker connected to the power source for a while, as it may take some time to reach a full charge.
6. Once fully charged, the LED light might turn off, or the charging indicator may change to a steady solid color. Again, refer to the user manual for precise details on your model.
Note: If the LED light does not illuminate or there is no indication of charging, try using a different charging cable or power source. If the issue persists, contact iHome customer support for further assistance.