JBL KOPFHORER user manual

JBL earbuds use LED lights as indicators for various states and functions. Here are what some of them mean:
1. Charging State: When the JBL earbuds are charging, you will see a constant LED light. The color is often red or orange.
2. Fully Charged: When the earbuds are fully charged, the LED indicator changes, sometimes turning white or green, or sometimes the light simply turns off.
3. Power ON State: When the earbuds are turned on, you'll see an LED light. This is oftentimes white.
4. Bluetooth Pairing State: In pairing mode, there will be a LED light flashing. The color is often blue or sometimes the light will flash between blue and white.
5. Low Battery: When the battery is low, the LED indicator will often flash red.
Note: These indications can vary slightly depending on the specific model of JBL earbuds. You should refer to the user manual for model-specific instructions.

To pair your JBL earbuds to each other, follow these steps:
1. Turn off the earbuds: Make sure both the left and right earbuds are turned off before starting the pairing process.
2. Put the earbuds into pairing mode: Press and hold the power button on both earbuds simultaneously until the LED indicators start flashing or you hear a sound indicating that the earbuds are in pairing mode.
3. Check for successful pairing: The LED lights on the earbuds should flash in a synchronized manner, indicating that the pairing was successful. Alternatively, you may hear a voice prompt indicating the pairing status.
4. Test the connection: Once paired, try playing audio to ensure the connection is established between the earbuds.
Note: The exact pairing process may vary depending on the model of your JBL earbuds. It's recommended to refer to the manufacturer's instructions specific to your device for accurate and detailed pairing steps.