Marantz SR6015 user manual

The Marantz SR6015 has the following ports:
1. 7 HDMI inputs, 3 HDMI outputs
. 2 Component video inputs, 1 Component video output
3. 4 Composite video inputs, 2 Composite video outputs
4. 5 Analog audio inputs, 1 Analog audio output
5. 2 Optical digital inputs
6. 2 Coaxial digital inputs
7. 1 Ethernet port (RJ-45)
8. 5 Composite video outputs
9. 2 Preamp outputs for Zones 2 and 3
10. 11.2 channel preamp outputs (RCA)
11. 11 Speaker terminals (Binding Post)
12. 2 subwoofer outputs
13. 1 Headphones (6.3 mm)
14. 1 USB port (front)
15. 1 FM Antenna input
16. Remote control inputs and outputs
17. 1 RS232C port
18. Bluetooth, Wi-Fi, and AirPlay 2, HEOS Wireless Multi-Room Music Streaming.
This is just a high-level overview and for detail description on these ports and its uses, refer to the detailed user manual or contact Marantz Customer Support.

There could be a few reasons why you're not getting any sound from your Marantz SR6015. Here are some troubleshooting steps you can try:
1. Check the connections: Make sure all the audio cables are securely plugged into the correct ports on both the receiver and your audio source (e.g., TV, Blu-ray player). Ensure that the speakers are properly connected to the receiver as well.
2. Verify input selection: Ensure that the correct input source is selected on the receiver. Use the remote control or front panel display to navigate through the various input options and select the one you are using.
3. Volume level: Check the volume level on the receiver. Make sure the volume is not set too low or muted. You can adjust the volume using the volume knob or remote control.
4. Test other sources: Try connecting a different audio source to the receiver, such as a different DVD player or game console. This will help determine if the issue is specific to a particular source device or if it's a broader problem with the receiver.
5. Speaker settings: Access the receiver's menu settings and ensure that the speakers are set up correctly. Ensure that the correct speaker configuration, speaker sizes, and crossover settings are selected.
6. Factory reset: If none of the above solutions work, you can try performing a factory reset on the receiver. Consult the user manual or the Marantz website for instructions on how to perform a reset.
If you have tried all these troubleshooting steps and still don't have any sound, it could indicate a hardware issue or a problem with the receiver's internal components. In this case, it's recommended to contact Marantz customer support or a qualified technician for further assistance.

To reset your Marantz SR6015 receiver to its factory settings, you can follow the steps below:
1. Power off your Marantz SR6015 receiver.
. Locate the "Power" button on the front panel of the receiver.
3. While holding down the "Power" button, also press and hold the "Source Select" and "Status" buttons simultaneously.
4. Continue holding all three buttons until the display on the front panel shows "Initialization" and "Clear" messages.
5. Release the buttons and wait for the receiver to reset. This may take a few moments.
6. Once the reset process is complete, the receiver will power on and display the initial setup prompts on your TV screen.
Please note that performing a factory reset will erase your saved settings and return the receiver to its original factory settings. Make sure to back up any important configurations before proceeding.

The Marantz SR6015 is a 9-channel receiver that is capable of delivering up to 110 watts per channel (8 ohms, 20Hz - 20kHz, 0.08% THD, 2 channels driven).