Singer PROMISE-1409 user manual

If you want to reset your Singer sewing machine, follow these steps:
1. Turn off the machine and unplug it from the power source.
. Remove the needle, thread, and bobbin from the machine.
3. Open the bobbin case and remove the bobbin.
4. Follow the instructions in the sewing machine's manual to remove the needle plate.
5. Clean any lint, dust, or debris from the bobbin area using a soft brush or tweezers.
6. Once the area is cleaned, replace the needle plate and secure it in place.
7. Insert a new needle into the machine, making sure it is inserted correctly and tightened.
8. Replace the bobbin, ensuring it is inserted correctly.
9. Close the bobbin case and rethread the machine following the sewing machine's manual.
10. Plug in the machine and turn it on.
11. Test the machine by sewing a few stitches on a piece of scrap fabric.
By following these steps, you can reset your Singer sewing machine and ensure it is ready for use again.