Yamaha RX-V6A user manual

The Yamaha RX-V6A supports HDMI 2.1 version.

The Eco Mode on the Yamaha RX-V6A is a feature that helps reduce power consumption and energy usage. When Eco Mode is enabled, the receiver will lower its power consumption by adjusting various settings, such as reducing the maximum output power and optimizing power usage during standby mode. This helps to save energy and reduce the environmental impact while still maintaining good audio performance.

To reset the Yamaha RX-V6A receiver, you can follow these steps:
1. Turn off the receiver and unplug it from the power outlet.
. While the receiver is unplugged, press and hold the "INFO" and "TONE CONTROL" buttons on the front panel.
3. While holding the buttons, plug the receiver back into the power outlet.
4. Continue holding the "INFO" and "TONE CONTROL" buttons until "Advanced Setup" appears on the front panel display.
5. Release the buttons and use the "PROGRAM" knob to select "Initialize All".
6. Press the "PROGRAM" knob to confirm the selection.
7. The receiver will reset and restore the factory settings. This may take a few minutes.
8. Once the reset process is complete, the receiver will restart automatically.
Note: The "INFO" button may also be labeled as "DISPLAY" on some Yamaha models.
Please keep in mind that resetting your receiver will erase all your custom settings and configurations.

The Yamaha RX-V6A is generally considered the better model compared to the RX-V4A. The RX-V6A offers more advanced features, such as support for higher-resolution audio formats like Dolby Atmos and DTS:X. It also has more HDMI inputs, more power output, and additional connectivity options. However, the choice ultimately depends on your specific needs and budget.