Zanussi ZWF-71263-W-LINDO-100 user manual

Follow these steps to reset your Zanussi ZWF-71263-W-Lindo-100 washing machine:
1. Turn off the washing machine and unplug it from the power source.
2. Wait a few minutes, then plug it back in.
3. Press and hold together the start/pause and cancel button at the same time.
4. While holding these buttons, turn the washing machine on.
5. Keep holding these two buttons down for about five seconds.
6. Release the buttons.
This should reset your Zanussi washing machine.
If this doesn't work, or if your washing machine doesn't have these buttons, try looking in the user manual for specific instructions, or contact Zanussi's customer service for help.

The quick wash on a Zanussi Lindo 100 washing machine, specifically the ZWF-71263-W model, is a shorter and faster program designed to clean lightly soiled clothes quickly. This cycle typically lasts between 15-30 minutes, depending on the specific settings and options chosen. It is ideal for items that do not require deep cleaning or have only been worn for a short period of time.

To drain the Zanussi Lindo 100 washing machine, follow these steps:
1. Turn off the washing machine and unplug it from the power outlet to ensure safety.
2. Locate and open the drain filter on the front bottom-right corner of the machine. Depending on the model, the filter might be behind a small removable cover.
3. Place a shallow container or towel beneath the filter area to catch any excess water that may leak.
4. Slowly unscrew the drain filter cover anti-clockwise until the water starts to come out. Be cautious as the water may be dirty or soapy.
5. Allow the water to drain completely into the container or towel. You can gently rock the machine forwards and backwards to aid the process.
6. Once all the water has drained, carefully remove any debris or obstructions from the filter. Rinse it under running water to ensure it is clean.
7. Reinsert the filter back into its place and tighten the cover by turning it clockwise. Make sure it is properly secured to prevent any leaks.
8. Wipe away any water spillage from the machine and the surrounding area.
9. Plug the washing machine back into the power outlet and restart it for normal use.
Note: If you are unable to solve the drainage issue or a more complicated problem arises, it is recommended to consult the Zanussi user manual or contact their customer support for assistance.

Yes, most Zanussi washing machines have a reset button. The location of the reset button may vary depending on the model, but it is usually located on the control panel or inside the door of the machine. If you are unable to locate the reset button, you can refer to the user manual of your specific model for more information.