Zanussi ZWT71201WA user manual

There could be several reasons why your Zanussi washing machine won't start. Here are few possibilities:
1. Power Issue: Ensure that the machine is properly plugged in and getting power. Check if there's any issue with the power socket by plugging in another device.
2. Door not closed correctly: If the door of your washing machine is not closed correctly, it may prevent your machine from starting. Make sure the door is closed and latched properly.
3. Delay Start: Make sure that the 'delay start' function hasn't been accidentally activated.
4. Faulty or Damaged Buttons: If buttons or control panel are faulty, it may prevent the machine from starting.
5. Needs a Reset: Sometimes, like many electronics, it might need a reset. Unplug the machine for about a minute and then plug it back in to see if it helps.
6. Child lock: If your model has a child lock, ensure it has not been activated by mistake.
7. Faulty Parts: Faulty parts like door latch, main control board, timer or starter switch could be the issue.
Remember to always unplug your washing machine before doing any troubleshooting. If you are unsure, it's always better to call a professional for help.

To reset a Zanussi appliance, you can try the following steps:
1. Unplug the appliance from the power outlet.
. Wait for about 10-15 seconds.
3. Plug the appliance back into the power outlet.
4. Turn on the appliance.
5. Check if the appliance has reset.
If this does not work, you can consult the user manual or contact Zanussi customer support for specific instructions on how to reset your particular model.

There could be several reasons why your Zanussi washer dryer is not drying properly. Some common ones include:
1. Overloading: If you have overloaded the washer dryer with too many clothes, the air circulation inside the machine may be restricted, leading to inefficient drying. Try reducing the load size and see if that helps.
2. Ventilation: Ensure that the dryer's ventilation hose or vent is not blocked or restricted. A clogged vent can prevent hot air from escaping, resulting in longer drying times or no drying at all.
3. Lint Filter: Check and clean the lint filter located inside the dryer drum. If it is clogged with lint or debris, it can affect the dryer's performance and prevent proper airflow.
4. Heating Element or Thermostat: Faulty heating elements or thermostats can cause the dryer to not generate enough heat for drying. You may need to have these components checked and replaced if needed.
5. Sensor Issues: Some washer dryers have moisture or humidity sensors that detect when the clothes are dry. If these sensors are malfunctioning, they may incorrectly determine the drying process is complete, resulting in damp or wet clothes. Check the sensor settings or consult the user manual for instructions.
If none of these solutions resolve the issue, it may be necessary to contact a professional technician or the Zanussi customer service for further assistance.

Yes, most Zanussi washing machines have a reset button. The location of the reset button may vary depending on the model, but it is usually located on the control panel or inside the door of the machine. If you are unable to locate the reset button, you can refer to the user manual of your specific model for more information.