Streszczenie treści zawartej na stronie nr. 3
Caller ID Speaker Phone V10M10_IM_EN_03232007 USER SAFETY GUIDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packaging will inform about the methods of disposal. The materials are recyclable as mentioned in it
Streszczenie treści zawartej na stronie nr. 4
Caller ID Speaker Phone V10M10_IM_EN_03232007 USER SAFETY GUIDE Compliance (USA and Canada) This product complies with the standards in Part 68 of the FCC Rules in the USA and CS-03 in Canada. 1. This product must be connected to the public switched telephone network through a modular telephone outlet or jack. 2. Upon the request of the local telephone service provider, the user of this product must provide the following information: • The “line”
Streszczenie treści zawartej na stronie nr. 5
Caller ID Speaker Phone V10M10_IM_EN_03232007 TABLE OF CONTENTS Getting Started General Features ……………………………………………………………………... 5 In the Package ………………………………………………………………………... 5 Location of Controls ………………………………………………………………..… 6 Getting the Telephone Ready for Use ……………………………………………... 7 Mounting the Phone on the Wall ……………………………………………………. 8 Connecting the Stand for Flat Surface Placement ………………………………... 8 Installing the Batteries ……………………………………
Streszczenie treści zawartej na stronie nr. 6
Caller ID Speaker Phone V10M10_IM_EN_03232007 GETTING STARTED Thank you for purchasing the JT-P531 Caller ID Speaker Phone. Please read and follow the instructions in this manual carefully to ensure that your product operates correctly. General Features • FSK/DTMF Dual System Caller ID Speaker Phone • Redial, flash, and hold functions • Two One-Touch Number Memory • Ten Two-Touch Number Memory • Message Memory (up to 94 messages) • Digital
Streszczenie treści zawartej na stronie nr. 7
Caller ID Speaker Phone V10M10_IM_EN_03232007 GETTING STARTED Location of Controls 1 6 7 8 2 9 10 11 12 13 14 3 15 16 17 18 4 19 5 1. LCD Screen 11. STORE Button 2. Ringer Light 12. HOLD Button 3. Handset 13. M1 (Memory 1) Button 4. Handset Jack 14. FLASH Button 5. Numeric keypad 15. M2 (Memory 2) Button 6. DEL. Button 16. REDIAL/P Button 7. ▲ Button 17. VIP/LCD Button 8.
Streszczenie treści zawartej na stronie nr. 8
Caller ID Speaker Phone V10M10_IM_EN_03232007 GETTING STARTED Getting the Telephone Ready for Use 1. Choose a desired location for the unit (mounted or on a flat, level surface). 2. Adjust the removable tab located above the speaker on the base of the phone. • The tab slides for easy removal. LIP • For wall mounted units, the side of the tab with the lip must be situated toward the top of the base to allow the handset
Streszczenie treści zawartej na stronie nr. 9
Caller ID Speaker Phone V10M10_IM_EN_03232007 GETTING STARTED Getting the Telephone Ready for Use- continued 4. Plug one end of the flat telephone cord into the jack in the rear of the unit’s base (marked TEL-LINE), and the other end into the wall jack which supplies telephone service. Mounting the Phone on the Wall 1. Choose a desired wall location for the phone. Wall mount hanger 2. Align nails or picture hooks w
Streszczenie treści zawartej na stronie nr. 10
Caller ID Speaker Phone V10M10_IM_EN_03232007 GETTING STARTED Connecting the Stand for Flat Surface Placement-continued 4. There are four (4) slots. The top two (2) slots are situated closer together and are on the bottom surface of the unit. The bottom two (2) slots are situated further apart and are located in indented rectangular sections which are cut into the bottom surface. 5. Line up the top two lips on the stand with the top tw
Streszczenie treści zawartej na stronie nr. 11
Caller ID Speaker Phone V10M10_IM_EN_03232007 GETTING STARTED Installing the Batteries The JT-P531 requires three (3) AAA batteries, which are used to operate the speakerphone, the LCD display, and to retain Caller ID data and any settings programmed into the phone. Using an optional AC adapter (see Notes below) will increase the battery’s life span, requiring less frequent battery replacement. 1. Remove the battery compartment cover at the
Streszczenie treści zawartej na stronie nr. 12
Caller ID Speaker Phone V10M10_IM_EN_03232007 GETTING STARTED Notes: • If neither the batteries nor an AC adapter are connected, the JT-P531 will still be able to place and receive calls, but the speakerphone, the ability to store Caller ID data, and the LCD display functions will not operate. • When batteries are used without an AC adapter, they should be replaced when the display dims. • When replacing the batteries without an AC adapter connec
Streszczenie treści zawartej na stronie nr. 13
Caller ID Speaker Phone V10M10_IM_EN_03232007 OPERATIONAL INSTRUCTIONS Description of the Display The JT-P531 features a three-line LCD. The top line displays basic information; the middle line shows the telephone number of the incoming call; and the bottom line displays the name of the caller. Also included on the display is helpful information such as: • The word, “LOW” appears on the screen when the battery power is low. • The word, “NEW” appea
Streszczenie treści zawartej na stronie nr. 14
Caller ID Speaker Phone V10M10_IM_EN_03232007 OPERATIONAL INSTRUCTIONS Basic Setup-continued 3. SET AREA CODE • When the LCD displays “LOCAL AREA CODE”, press [DIAL] to enter this function. • Use [ ▼] to select the each digit of area code. • Use [ ▲] to confirm each digit and move to next digit • Press [DIAL] to confirm the first digit. • Use the same procedure to set the rest digits. 4. REGIONAL ACs (Area Codes) • When the LCD displays “
Streszczenie treści zawartej na stronie nr. 15
Caller ID Speaker Phone V10M10_IM_EN_03232007 OPERATIONAL INSTRUCTIONS Basic Setup-continued 8. LCD ADJUSTMENT • Press [VIP/LCD] to adjust the brightness of the LCD screen. • There are six (6) levels of brightness (Level 3 is the default setting) 9. SAVING NUMBERS IN THE PHONEBOOK • Press [STORE] • Press [ ▲] or [ ▼] to scroll phone listings • Press [STORE] again to enter phone number • Enter number you wish to save. • Press [STORE] again to
Streszczenie treści zawartej na stronie nr. 16
Caller ID Speaker Phone V10M10_IM_EN_03232007 OPERATIONAL INSTRUCTIONS Using the Last Number Redial Function 1. Remove the handset from base and listen for dial tone. 2. Use the [REDIAL/P] button redial the last number dialed (typically most helpful when the line is busy). Receiving Caller ID Information Your telephone service provider must offer caller ID service in order to activate the caller ID function on this unit. 1. Incoming Call Disp
Streszczenie treści zawartej na stronie nr. 17
Caller ID Speaker Phone V10M10_IM_EN_03232007 OPERATIONAL INSTRUCTIONS Calling a Number from the Caller ID List 1. With the handset is on the hook, press [ ▲] or [ ▼] to find the number you wish to call. 2. Press [DIAL] once; the LCD will display “PICK UP OR ADJ,” (for a 10 digit number) or “PICK UP PHONE.” (for a 7 or 11 digit number). 3. Pick up the handset and the number on the display will automatically dial. 4. With the handset off the h
Streszczenie treści zawartej na stronie nr. 18
Caller ID Speaker Phone V10M10_IM_EN_03232007 OPERATIONAL INSTRUCTIONS Dialing from Two-Touch Memory 1. Pick up the handset or press [SPEAKER]. 2. Press [DIAL] and number (0-9). The number in memory will dial automatically. Using the Flash Function When the JT-P531 is used in an office equipped with centralized phone system PABX, this telephone can transfer and hold calls. 1. Ask the calling party to hold. 2. Press and release [FLASH]. 3. Dia
Streszczenie treści zawartej na stronie nr. 19
Caller ID Speaker Phone V10M10_IM_EN_03232007 TROUBLESHOOTING & SPECIFICATIONS Troubleshooting • No Display on LCD Screen o Brightness on display may be turned down. Increase brightness level. o No batteries or batteries are improperly installed. If no batteries, install 3 AAA batteries as directed or Install optional AC Adapter (not included). Make sure batteries observe to polarities (+/-) as indicated inside the battery compartment.
Streszczenie treści zawartej na stronie nr. 20
TEL: 516-626-7188 FAX: 516-626-7105 website: www.jWIN.com © 2007 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product enclosed herewith including design, shape and graphics, may be reproduced or transmitted in any form without the expressed written consent of jWIN Electronics Corp. by any means, electronic or mechanical, including photocopying, recording, or by use of an informat
Streszczenie treści zawartej na stronie nr. 1
Caller ID Speaker Phone
Instruction Manual
JT-P531
Please read this manual carefully before operating and save it for future reference.
Have a question? Please visit http://www.jWIN.com
Streszczenie treści zawartej na stronie nr. 2
Caller ID Speaker Phone V10M10_IM_EN_03232007 - 1 - www.jWIN.com
