Streszczenie treści zawartej na stronie nr. 1
V-250
DECT GAP Phone
User’s Guide
Version 1.01
Edition 1
4/2007
Streszczenie treści zawartej na stronie nr. 2
V-250 User’s Guide 1 LCD Display Volume Level Speaker Mode I - low volume II - medium volume III - high volume Keypad Off-hook Locked Mute Battery Strength 3 bars - full charge 2 bars - half charge 1 bar - low power Signal Strength Blinking - handset not registered with a base station or out of range. On - handset Handset Number registered and in range Assigned to the V- of a base station. 250 by the base station. Use it for internal calls. Handset Name This is configurable. Time hou
Streszczenie treści zawartej na stronie nr. 3
V-250 User’s Guide 2 Quick Reference - Physical Parts HANDSET LCD Earpiece 1 2 Left Navigator-up 3 Softkey 4 Right 5 Softkey Navigator- 6 left Navigator- 7 right Off-hook 8 9 On-hook Dialing 10 11 Enter Numbers 13 Navigator-down Speaker 12 Phone 14 15 Internal Microphone Call / Flash BASE Charge Terminals Charge 17 LED 16 3
Streszczenie treści zawartej na stronie nr. 4
V-250 User’s Guide 3 Quick Reference - Basic Operations • Make a call Lift the V-250 from the charger and press Off-hook (8). Dial a number. To end the call, place the V-250 on the charger or press On-hook (9). • Receive a call When the V-250 rings, lift the handset or press Off-hook (8). To end the call, place the V-250 on the charger or press On- hook (9). • Make a call using speakerphone Press Speaker Phone (12). Dial a number. Speak into the microphone. To switch to earpiece, press Speak
Streszczenie treści zawartej na stronie nr. 5
V-250 User’s Guide 4 Install and Charge the Batteries 2 1 5 4 3 1 Insert the included batteries. Make sure that the polarities (+/-) are facing the right direction. 2 Slide the back cover closed. You should hear a click. 3 Connect the RJ-11 jack of the included power adaptor cable to the back of the charger base. 4 Connect the other end of the power cable to a wall socket. 5 Place the handset in the base station for charging. 4.1 Important Notes About Charging the Batteries Note: Make sure
Streszczenie treści zawartej na stronie nr. 6
V-250 User’s Guide • After initial charging, the power adaptor must remain con- nected to the main power supply and the base unit with the main power switched on. It is recommended to leave the handset charging overnight to ensure the maximum usable time. • The batteries should hold their charge for up to 120 hours, depending on use. The batteries need replacing if the batter- ies do not hold a charge for more than two hours. • If the phone is not to be used for a substantial period of time,
Streszczenie treści zawartej na stronie nr. 7
V-250 User’s Guide 5.1 Register with a Base Station 1 Put your base station in registration mode. On ZyXEL base stations, press the base station button for 6 to 11 seconds. See your base station documentation for details. 2 Make sure the LCD is on (press any key). 3 Press the Right Softkey to enter the main menu. 4 Navigate to the PHONE SETTING screen by using the Navigator-right button, then press the Right Softkey to select OK and enter the PHONE SETTING menu. 5 Use the Navigator-up but
Streszczenie treści zawartej na stronie nr. 8
V-250 User’s Guide 7 Use the numbers on the V-250’s PHONE SETTING keypad to enter the base station PIN. This is a 4 digit number you configure on the base station. PIN : **** Press the Right Softkey to select LONG PRESS BASE OK and enter the screen to enter PAGE KEY the base station PIN (password). 22/11/2006 12:23 Default on ZyXEL base stations is BACK OK 1234. Your handset attempts to register with the base station. O
Streszczenie treści zawartej na stronie nr. 9
V-250 User’s Guide 1 Select one of the last numbers dialed by pressing the Navigator-down button when the V-250 is in stand-by mode (not in any configuration screen). 2 Dial one of the recently dialed numbers by pressing the Off-hook button when the phone number is selected. Note: The V-250 stores phone numbers up to 24 digits long (longer phone numbers will be truncated). You can clear all of the recently dialed phone numbers. 1 Select one of the last numbers dialed. 2 Press and hold the
Streszczenie treści zawartej na stronie nr. 10
V-250 User’s Guide Adjust the volume level during a call III by using the Right Softkey to select VOLUME. The V-250 alternates 0:23 between the three levels of volume. Stop pressing the Right Softkey when you have selected the level you 666-6666 want. In our example the volume is at high VOLUME level (III). 5.5 Flash Function Press the R/INT button on the V-250 to put an existing call
Streszczenie treści zawartej na stronie nr. 11
V-250 User’s Guide 3 “PAGING” and the handset number of the person calling is displayed on the V-250 receiving the intercom call. “INTERCOM” and the handset number is displayed on the V- 250 during the conversation. 4 Press the On-hook button to terminate the call. 5 If an external call comes in during an intercom call, the V- 250 plays a tone to indicate that an external call is coming in during an intercom call. Press the On-hook button to terminate the intercom call and when you hear the
Streszczenie treści zawartej na stronie nr. 12
V-250 User’s Guide 6 Menu Features The V-250 has four menus: 1 Phone Book - Use this menu to add, edit or delete stored numbers. The V-250 can store up to 90 telephone number entries of up to 24 digits in length. The names associated with the phone numbers can be up to 15 characters in length. 2 Phone Setting - Use this menu to set the time and date on the V-250, register to a base station, change the dial mode and display and enable other features. 3 Call History - Use this menu to view u
Streszczenie treści zawartej na stronie nr. 13
V-250 User’s Guide 7 Phone Book Menu Enter the Phone Book: 1 Press the Right Softkey button. 2 Use the Navigator-up/down/ PHONE BOOK right/left buttons to select the icon. Press the Right Adam Softkey button and the Phone Barbara Book opens. John Doe Note: The first time you enter this menu it will not contain any BACK VIEW MENU names. “Adam”, “Barbara” and “John Doe” are just examples. 7.1 Phone Book Menu Features 1 In the Phone Book menu, press PHONE BOOK the Right
Streszczenie treści zawartej na stronie nr. 14
V-250 User’s Guide Note: Use the # key on the handset to alternate between capital and lowercase characters. Press the number keys repeatedly to rotate through the letter options when typing characters. For example, press 2 twice to type the letter B. 8 Phone Setting Menu Enter the Phone Setting menu: 1 Press the Right Softkey button. 2 Use the Navigator-up/down/ PHONE SETTING right/left buttons to select the ALARM icon. Press the Right CALLER ID Softkey button and the Phone SET KEYTO
Streszczenie treści zawartej na stronie nr. 15
V-250 User’s Guide FUNCTION DESCRIPTION Set Activate or deactivate the tone you hear when pressing Keytone keys on the V-250. Set Keylock Activate or deactivate keypad lock. You must unlock your phone when you want to make calls. You can also turn this feature on by pressing the Left Softkey for 2 seconds. Use the Left Softkey followed by the * key to temporarily unlock the keypad. The phone keypad locks again after 15 seconds of inactivity. Turn the Keylock off permanently via the Phon
Streszczenie treści zawartej na stronie nr. 16
V-250 User’s Guide FUNCTION DESCRIPTION Direct Call Activate and configure the Direct Call feature on the V- 250. You can program a phone number which is dialed automatically when any key is pressed on the V-250. Note: You can only use the direct call feature with another handset registered to the same base station as the V-250. Press the On-hook button to end a direct call. Press and hold the On-hook button for 2 seconds to turn the Direct Call mode off. Wallpaper Select from one of 2 wall
Streszczenie treści zawartej na stronie nr. 17
V-250 User’s Guide FUNCTION DESCRIPTION Handset Use this to view the V-250’s firmware version number as Version well as the RFPI number. The RFPI number is a factory assigned number (unique to each handset) used to identify the V-250. Default Use this to reset the phone settings to the factory defaults. This does not affect the phone numbers saved on your phone or the base station registration. 9 Call History Menu Enter the Call History menu: 1 Press the Right Softkey button. 2 Use the
Streszczenie treści zawartej na stronie nr. 18
V-250 User’s Guide 4 Use the Navigator-up button to CALL HISTORY scroll through the received calls. Add to phonebook Press the Right Softkey to select Delete EDIT with one of the numbers highlighted. The Call History menu allows you to add recently dialed phone numbers to the V-250s phonebook or delete BACK NEXT single entries from recently received calls memory. 10 Ring Type Menu Enter the Ring Type menu: 1 Press the Right Softkey button. 2 Use the Naviga
Streszczenie treści zawartej na stronie nr. 19
V-250 User’s Guide 3 Use the Navigator-up and EXTERNAL CALL Navigator-down keys to select internal or external call settings. EXT RING LVL Press the Right Softkey to select EXT RING TYP OK with one of the types of calls selected (for example External Call). The LCD displays as shown. This menu allows you to specify the BACK NEXT ring volume and select a melody for calls coming in from external lines. Note: The same functions are available for internal calls (c
Streszczenie treści zawartej na stronie nr. 20
V-250 User’s Guide Safety Warnings • Do NOT use this product near water, for example, in a wet basement or near a swimming pool. • Do NOT expose your device to dampness, dust or corrosive liquids. • Do NOT store things on the device. • Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. • Connect ONLY suitable accessories to the device. • ONLY qualified service personnel should service or disassemble this device. • Use ONL
