Streszczenie treści zawartej na stronie nr. 1
Owner’s Manual
and
Operating Instructions
Instructions for basic operation and installation
P/N 000-0865-002
c
Advanced Technology Video, Inc. Advanced Technology Video, Inc.
14842 NE 95th Street
Customer Service : sales@atvideo.com
: tech@atvideo.com
Home Page : http://www.atvideo.com
Technical Service
Fax 425/881-7014 425/885-7000 Phone 888/288-7644
Redmond, Was
Streszczenie treści zawartej na stronie nr. 2
Table of Contents Introduction .................................................................................................................................................................... 3 Operational Features Description .................................................................................................................................. 3 Live Camera Displays ...................................................................................
Streszczenie treści zawartej na stronie nr. 3
INTRODUCTION Thank you for purchasing Advanced Technology Video’s QSP-660 four camera Real Time Quad. This instruction manual describes the powerful features of this product for basic and advanced operation. It also covers the installation steps that will allow quick and easy integration into your security system. The following section provides an overview of the operational features of the QSP-660. If you are familiar with the QSP-660, you should proceed to the G
Streszczenie treści zawartej na stronie nr. 4
GETTING STARTED Camera Configuration QSP-660 Camera Camera Alarm Inputs Camera VCR (Optional) Optional for VCR Alarm Out recording 10K OUT IN changes VCR-IN VCR OUT VIDEO OUT Monitor The above diagram shows the typical 4-camera installation for the QSP-660. Up to four cameras can be connected to the real time quad using the back panel connectors. Note: The VCR and monitor connections must be as shown above for proper operation. Installation Steps The following st
Streszczenie treści zawartej na stronie nr. 5
4. If your VCR has internal on-screen menus for its set up, use the VCR Bypass feature of the QSP-660 to view the VCR’s on-screen menus on the display monitor. See the “VCR Bypass Function” description on page 3. 5. At this point, the basic configuration of your QSP-660 is complete. You may now proceed to set more advanced functions as required for your installation (alarms, camera labels, etc.) Refer to the Advanced Function menus starting on page 9 for detailed
Streszczenie treści zawartej na stronie nr. 6
OPERATION Your QSP-660 has seven mode control buttons and four numbered camera buttons which allow easy access to all modes of operation. The seven mode buttons on the left are used to control monitor display operations and VCR playback. An LED below each button will light when the unit is in the mode corresponding to that button. Note: Live camera display modes will affect recording. Following is a summary of each button’s function and the QSP-660 operating modes
Streszczenie treści zawartej na stronie nr. 7
REMOTE CONTROL OPERATION The IR remote control provided with your QSP-660 has a limited set of buttons. Operation with the remote control is slightly different than the front panel. The remote control has a single CAMERA button for selecting cameras and successive button presses will rotate through the available cameras. Sequencing is initiated by pressing and holding the remote control’s FREEZE button for approximately 3 seconds. Pressing the QUADRANT button an
Streszczenie treści zawartej na stronie nr. 8
SET UP MENUS The QSP-660 set up is accomplished through its on-screen menus. To enter the menu system, push and hold the DISPLAY button for approximately 3 seconds. The display will then show the top-level menu. Selection of any menu item is done with the camera buttons. Selecting DISPLAY will exit the present menu level. Main Menu Advanced Technology Video Selecting: QSP660 V3.200 1. Enters Set Time/Date menu to program the internal clock and select time and date
Streszczenie treści zawartej na stronie nr. 9
Other Display Options Other Display Options This menu determines the display behavior of the date and time information for both the VCR and monitor camera 1: Location Lower Right displays. 2: Display On Selecting: 1. Toggles the time and date display location through Camera: Select any one of the four display quadrants for live camera DISPLAY: Accept and Return displays. 2. Toggles the time and date for the monitor display On/Off. ADVANCED FUNCTION MENUS This sect
Streszczenie treści zawartej na stronie nr. 10
Sequence Set Up A unique feature of the QSP-660 is the option to customize the display sequence format to suit your application. You can program a specific selection of cameras for sequencing. Selecting: Display Sequence Set Up 1. Enters edit mode for hold (dwell) time. 1: Hold Each Image for: 3 Sec. While editing: 2: Full Camera Call Up . . . 1 - 4 Used to enter digits 1 through 4 3: Quad . . . 4: PIP . . . 5 - 6 VCR + 1-2 5: Dual PIP . . . DISPLAY Completes the
Streszczenie treści zawartej na stronie nr. 11
Sequencing Format Screens Full Camera Display Quad Display Sequence PIP Display Sequence Sequence 1: Background: As is 1: Upper Left: 1 . . . 2: Insert: 1 2 3 4 1: Cameras: 1 2 3 4 2: Upper Right: . 2 . . 3: Lower Left: . . 3 . 4: Lower Right: . . . 4 Enter Cameras you want Enter Cameras you want Enter Cameras you want displayed in the sequence displayed in the sequence displayed in the sequence Camera: Select Camera: Select Camera: Select DISPLAY: Accept and Ret
Streszczenie treści zawartej na stronie nr. 12
Alarm Set Up Alarm Set Up Selecting: 1: External Alarms . . . 1. Enters individual cameras for External Alarms menu. 2: Video Loss Alarms . . . 2. Enters individual camera Video Loss Alarms. 3: Set Alarm Enable Schedule . . . 4: Enable Scheduled Alarms . . . 3. Enters Set Alarm Enable Schedule menu. 5: Alarm Control Options . . . 4. Enters Enable Scheduled Alarms menu. 6: Alarm Log . . . 7: Serial Alarm Output: Off 5. (Press VCR+1) Enters Alarm Control Options men
Streszczenie treści zawartej na stronie nr. 13
Alarm Scheduling The QSP-660 contains a very flexible and advanced alarming system designed to provide an optimum solution for any installation. Along with the ability to enable various types of alarm inputs, a built in 7-day timer may also be used to individually enable and disable each alarm. The following menus are used to set the timer and select which alarms the timer will control. Set Alarm Enable Schedule Set Alarm Enable Schedule Selecting: 1 - 7 Selects
Streszczenie treści zawartej na stronie nr. 14
Alarm Control Options Alarm Control Options Selecting: 1. Enters the Set Alarm Hold Times menu. 1: Set Alarm Hold Times . . . 2: Set Alarm Activation Type . . . 2. Enters the Set Alarm Activation Type menu. 3: External Control Input: Freeze 3. Toggles the External Control Input between Picture 4: Master Enable Input Type: Freeze and alarm Master Enable. (The factory default Logic Low is “Picture Freeze”.) Camera: Select 4. Toggles the alarm Master Enable Input
Streszczenie treści zawartej na stronie nr. 15
Alarm Activation Type Set Alarm Activation Type Selecting: 1 - 4 Toggles individual camera alarm types between 1: Contact Closure Contact Closure, Contact Open, Logic Low, or 2: Contact Closure Logic High, triggering the alarm. 3: Contact Closure 4: Contact Closure In many applications the switch contact connection is between the alarm input pin and the chassis or signal ground. In the QSP-660 the contact connection can be between either Camera: Select the ground
Streszczenie treści zawartej na stronie nr. 16
Other Options Other Options The Other Options menu provides access to the advanced QSP-660 systems options. 1: Remote Control: Code 2 2: Security Set Up . . . Selecting: 3: Text Color: White 1. Toggles the IR remote control code setting 4: Text Background: Off between Code 1, Code 2, and remote Off. (See 5: VCR Playback: Field “Programming your ATV QSP-660 Remote Control” on page 17.) PIP: Restore ALL Settings to Factory Defaults 2. Enters the Security Set Up menu
Streszczenie treści zawartej na stronie nr. 17
HAND HELD IR REMOTE CONTROL The hand held remote control allows easy remote operation of your QSP-660 by duplicating the front panel buttons as shown in the diagram. One major difference between front panel and remote operation is that the individual camera buttons have been reduced to a single button. In this case, the first press of the camera button will cause the QSP-660 to display camera 1. Additional button presses will cycle the selection through each avail
Streszczenie treści zawartej na stronie nr. 18
ALARM INTERCONNECTION ON THE QSP-660 1K Ohm The alarm connector on the back panel allows input of four external 1: Alarm #1 control signals to affect the behavior of the real time quad under alarm conditions. Alarm inputs are provided for each camera. A 2: Alarm #2 picture freeze input is also provided to allow the picture to be frozen. 3: Alarm #3 These inputs are normally generated by a switch located at a door, window, or other point in the installation where a
Streszczenie treści zawartej na stronie nr. 19
In some installations, the alarm output is used to activate or deactivate high voltage and/or high current circuitry (110 VAC lights, siren, etc.) which cannot be controlled directly by the QSP-660. The easiest method to address the above cases is to use a relay, which has the number and rating on its contacts sufficient for the alarm output. Shown below are two methods to control a high current or high voltage device using a relay with a single, normally open con
Streszczenie treści zawartej na stronie nr. 20
RS-232 REMOTE CONTROL INTERFACE The QSP-660 has a built in RS-232 serial interface that supports remote control of the QSP-660 through simple ASCII commands. These commands provide access to the front panel button operations just as the IR Remote Control does. The QSP-660 serial interface is fixed at 2400 baud, 8 bits, 1 stop bit, and no parity. It uses the very simple command format: The command is 2 character or 2 character plus parameter and
