Streszczenie treści zawartej na stronie nr. 1
MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS
Copying Guide
Streszczenie treści zawartej na stronie nr. 2
©2008, 2009 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TTEC. No patent liability is assumed, however, with respect to the use of the information contained herein.
Streszczenie treści zawartej na stronie nr. 3
Preface How to read this manual Thank you for purchasing TOSHIBA Multifunctional Digital Systems or Multifunctional Digital Color Systems. This manual describes how to use the copying functions of this equipment. Read this manual before using this equipment. Symbols in this manual In this manual, some important items are described with the symbols shown below. Be sure to read these items before using this equipment. Indicates a potentially hazardous situation which, if not avoided, could re
Streszczenie treści zawartej na stronie nr. 4
Streszczenie treści zawartej na stronie nr. 5
CONTENTS Preface....................................................................................................................................... 1 Chapter 1 BEFORE USING EQUIPMENT BASIC Menu for the Copier Function ..................................................................................... 8 Placing Paper.......................................................................................................................... 11 Acceptable copy paper..............................
Streszczenie treści zawartej na stronie nr. 6
Specifying both the original size and the copy paper size separately ................................. 64 Specifying reproduction ratio manually................................................................................ 66 Copying photo originals in the optimal reproduction ratio for copy paper size (PHOTO ZOOM).................................................................................................................. 68 Selecting Finishing Mode ......................................
Streszczenie treści zawartej na stronie nr. 7
Outside Erase ....................................................................................................................... 142 Chapter 5 IMAGE ADJUSTMENT Displaying IMAGE Menu ...................................................................................................... 146 Using Image Adjustment Functions ................................................................................... 147 Color balance (YMCK adjustment)......................................................
Streszczenie treści zawartej na stronie nr. 8
Combination matrix 1/2...................................................................................................... 201 Combination matrix 2/2...................................................................................................... 202 INDEX ................................................................................................................................................................... 203 6 CONTENTS
Streszczenie treści zawartej na stronie nr. 9
1.BEFORE USING EQUIPMENT This chapter describes what you need to know before using this equipment, such as the composition of the BASIC menu for the copying functions and how to place copy paper. BASIC Menu for the Copier Function..................................................................................... 8 Placing Paper.......................................................................................................................... 11 Acceptable copy paper.....................
Streszczenie treści zawartej na stronie nr. 10
1 BEFORE USING EQUIPMENT BASIC Menu for the Copier Function When a few seconds have passed after you have turned the power ON, the BASIC menu for the copier function appears on the touch panel. The BASIC menu shows the following information: 20 19 18 17 16 15 1 14 2 13 12 3 4 5 6 7 8 9 10 11 1. Message indication area This shows a brief description of the functions or the current status of this equipment in message form. 2. Equipment status indication area ( P.10) This shows the size, paper ty
Streszczenie treści zawartej na stronie nr. 11
1 BEFORE USING EQUIPMENT 1.BEFORE USING EQUIPMENT 9. [ORIGINAL MODE] button ( P.59) This is for selecting an original mode. 10. Date and time 11. [JOB STATUS] button ( P.186) This is for confirming the processing status of copy, fax, scan or print jobs, and also for viewing their performing history. 12. [PROOF COPY] button ( P.38) This is for making a proof copy to check an image before making a large amount of copies. 13. Density adjustment buttons ( P.61) These are for adjusting the densit
Streszczenie treści zawartej na stronie nr. 12
1 BEFORE USING EQUIPMENT Equipment status indication area The equipment status indication area shows the following information: 5 4 1 3 2 1. Receiving tray indication ( P.40) This shows the tray to which copied paper exits. 2. [EXIT TRAY] button ( P.40) This is for switching receiving (exit) trays. 3. Drawer buttons ( P.55) These show the size of paper, amount of paper remaining in each drawer and the paper type set for the drawer. When you want to use a particular drawer, press the correspo
Streszczenie treści zawartej na stronie nr. 13
1 BEFORE USING EQUIPMENT Placing Paper Acceptable copy paper The following paper can be placed and used for copying. The values are valid only when Toshiba-recommended paper is used. For the recommended paper, refer to the Quick Start Guide. Do not place paper with mixed sizes or paper types in the same drawer. Be sure that the height of the stacked paper does not exceed the line indicated on the guides. Feeder Paper type Maximum sheet capacity Size *1 2 Plain paper, recycled A/B format: Dra
Streszczenie treści zawartej na stronie nr. 14
1 BEFORE USING EQUIPMENT Feeder Paper type Maximum sheet capacity Size 2 Bypass tray Plain paper, recycled A/B format: 100 sheets (64 - 80 g/m ) (17 paper A3, A4, A4-R, A5-R, A6-R, B4, B5, B5-R, FOLIO, 305 mm x - 20 lb. Bond) 2 *8 *8 2 (64 - 105 g/m ) 457 mm, 320 mm x 450 mm , 320 mm x 460 mm , 330 80 sheets (81 - 105 g/m ) (21 *8, *9 (17 - 28 lb. Bond) - 28 lb. Bond) mm x 483 mm THICK 1 40 sheets LT format: 2 (- 163 g/m ) LD, LG, LT, LT-R, ST-R, COMP, 13"LG, 8.5"SQ, 12" x 18", (- 90 lb.
Streszczenie treści zawartej na stronie nr. 15
1 BEFORE USING EQUIPMENT 1.BEFORE USING EQUIPMENT Placing paper in drawers Follow the procedure below to place paper in a drawer. For acceptable copy paper, see the following page: P.11 “Acceptable copy paper” Turn the power of this equipment ON. 1 Pull out a drawer carefully until it comes to a stop. 2 Push the part shown with an arrow (right side) of the 3 side guide to unlock it. Place paper in the drawer. 4 2 Up to 600 sheets (64 g/m ) (17 lb. Bond) can be placed in one drawer. Be sure t
Streszczenie treści zawartej na stronie nr. 16
1 BEFORE USING EQUIPMENT Move the end guide to the trailing edge of the paper 5 while pushing its lower part in the direction of the arrows. While holding the green lever of the front side guide, 6 adjust the side guides to the paper size. Adjust the side guides with both hands. Confirm that there is no extra gap between the paper 7 and the side or end guides. If the gap between the paper and the side or end guides is too big, this equipment may not be able to detect the size of the paper,
Streszczenie treści zawartej na stronie nr. 17
1 BEFORE USING EQUIPMENT 1.BEFORE USING EQUIPMENT Push the drawer straight into this equipment carefully until it comes to a stop. 10 Be careful not to let your fingers be caught when pushing the drawer into this equipment. This could injure you. The procedure differs as follows depending on the menu displayed after the drawer is closed. When “Did you change paper type?” appears When the paper type is different from the one that was in the drawer, press [YES] on the 11 touch panel. When it is
Streszczenie treści zawartej na stronie nr. 18
1 BEFORE USING EQUIPMENT When “Did you change paper size and type?” appears When the paper size and type are different from the one that was in the drawer, press 11 [YES] on the touch panel. When it is the same, press [NO]. If you press [NO], the procedure is completed. Select the size and type of the paper placed in the drawer on the touch panel. 12 1) Select the paper size. 2) Select the paper type if required ( P.19). 3) Press [OK]. To automatically detect the size of paper placed in a draw
Streszczenie treści zawartej na stronie nr. 19
1 BEFORE USING EQUIPMENT 1.BEFORE USING EQUIPMENT Registering paper size When you place paper for the first time or you replace the paper with that of a different size, you need to register the size to this equipment. When paper size is set to be detected automatically: When [AUTO (mm)] or [AUTO (inch)] has been selected for the paper size, the following procedure is not required. The paper size is set automatically. Press the [USER FUNCTIONS] button on the control 1 panel. Press the [USER]
Streszczenie treści zawartej na stronie nr. 20
1 BEFORE USING EQUIPMENT Select the paper size on the touch panel. 3 1) Select the drawer in which you placed paper. 2) Select the paper size. To automatically detect the size of paper placed in a drawer: Select [AUTO (mm)] when A/B format paper is placed and [AUTO (inch)] when LT format paper is placed instead of selecting a specified paper size. The paper size is automatically registered to the equipment with the automatic paper size detection function when paper is placed in this drawer. Pr
