Instrukcja obsługi Honeywell Color Camera

Streszczenie treści zawartej na stronie nr. 1

HCC484TP
Color Camera
Remote Control
User Guide
Document D002529 – 04/06 – Rev 1.00

Streszczenie treści zawartej na stronie nr. 2

Revisions Issue Date Revisions 1.00 04/06 New document. Rev 1.00 ii D002529 04/06

Streszczenie treści zawartej na stronie nr. 3

HCC484TP Color Camera Remote Control User Guide Remote Control of OSD from PC Remote Control Connections The HCC484TP can be controlled remotely using an RS485 cable to connect through the serial port on your PC. See the figure below for a description of the RS485 connection. RS485 Connect to 4P Cable Serial converter Serial Port cable (COM1 or COM2) VIDEO UP 4-Pin Cable Legend CONT MENU - + 1. Red Not used CV DOWN 2. Blue TRx- 3. Yellow TRx+ VSD 4. Black Not used DC RS485 Converter 4P Cabl

Streszczenie treści zawartej na stronie nr. 4

Remote Control of OSD from PC 3. Unpack the zip file into an appropriate folder. 4. Double-click the Setup.exe file to launch the Setup Program. 5. Ensure that the COM port you connected the RS485 converter to is selected. See the figure below. 6. Click OK to initialize Communication (this can take up to 20 seconds). 7. If Communication failed you can: a. Check the wiring and power connections of the camera, or b. Click Retry to initialize Communication again, or click End to close the window.

Streszczenie treści zawartej na stronie nr. 5

HCC484TP Color Camera Remote Control User Guide AE Control (Auto Exposure Control) In the AE Control box: � The Type of AE Mode is displayed � If Manual Lens is selected, the Shutter Speed can be set � If Auto Iris Lens is selected, the DC Level is set BMB/BLC Control (Black Mask/Back Light Compensation) In the BMB and BLC Control boxes: � Select the Black Mask Mode (Light Gray, Dark Gray, Black, or Off) � Select the BLC Mode (Low, Middle, High, Off) Rev 1.00 3 D002529 04/06

Streszczenie treści zawartej na stronie nr. 6

Remote Control of OSD from PC Sync System Control In the Sync System Control box you can select: � Internal � Linelock with Phase Adjust � Auto (Int for 12 VDC, Linelock for 24 VAC) OSD Menu Control Click on the button icons to access the OSD. OSD can be set to ON or OFF. The OSD menu can be controlled to: � Display the entire menu � Display the top menu � Display the bottom menu Auto White Balance Control In the Auto White Balance Control box: � Select one of the Auto White Balance settings �

Streszczenie treści zawartej na stronie nr. 7

HCC484TP Color Camera Remote Control User Guide Digital Slow Shutter Control In the Digital Slow Shutter Control box: � Set DSS to be OFF, AUTO or FIX � Set the maximum number of frame integration fields � AUTO will not exceed the number of frame integration fields � FIX will always use this number of frame integration fields, regardless of light level � Max AGC sets the AGC Maximum Gain Display Control In the Display Control box: � Set to display Camera ID and Camera Title or nothing (Off) � Se

Streszczenie treści zawartej na stronie nr. 8

Honeywell Video Systems (Head Office) Honeywell Video Systems Northern Europe 2700 Blankenbaker Pkwy, Suite 150 Netwerk 121 Louisville, KY 40299, USA 1446 WV Purmerend, The Netherlands www.honeywellvideo.com www.SecurityHouse.nl ℡ +1.800.796.2288 ℡ +31.299.410.200 Honeywell Security Australia Pty Ltd. Honeywell Video Systems UK Ltd. Unit 5, Riverside Centre, 24-28 River Road West Aston Fields Road, Whitehouse Ind Est Parramatta, NSW 2150, Australia Runcorn, Cheshire, WA7 3DL, UK www.ademco.com.a