Instrukcja obsługi JVC KA-DV5000

Streszczenie treści zawartej na stronie nr. 1

JVC

PROFESSIONAL
PRODUCTS
COMPANY
Application Note 2
Subject: Installing the KA-DV5000 Network Pack and accessory cards
Objective
Before you can stream video or record to a CompactFlash (CF) memory card, you must attach the KA-DV5000
Network Pack to the GY-DV5000 camcorder. Once installed, accessory cards, such as a LAN or CF memory card
must be installed.
What you need
• Philips screwdriver
• GY-DV5000 Camcorder
• KA-DV5000 Network Pack
• Rubber gasket that comes with the KA-D

Streszczenie treści zawartej na stronie nr. 2

Attaching the Network Pack to the Camera 1. Insure that the GY-DV5000 power is off and the KA-DV5000 power switch is off as well. 2. If attached, remove the battery holder from the rear of the GY-DV5000. 3. With the enclosed rubber gasket aligned with the screw holes on the rear of the camera, hook the Network Pack to the back of the camera from the top. 4. Feed the one large and two small power connectors through the hole in the KA-DV5000 body. 5. Press the Network Pack firmly to the ba