Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
Product name: Wireless Network Camera (PZ61x4) Release Date: 2005/05/24 Manual Revision: 1.00 Web site: www.vivotek.com Email: technical@vivotek.com sales@vivotek.com Made in Taiwan. ©Copyright 2000-2005. All rights reserved - 1 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Streszczenie treści zawartej na stronie nr. 3
Before You Use This Product The use of surveillance devices may be prohibited in your country by law. The Network Camera is not only a high-performance web-ready camera but also can be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use. It is important to first verify that all contents received are complete according to the list in the "Package Contents" chapte
Streszczenie treści zawartej na stronie nr. 4
Package Contents PZ6114/PZ6124 Camera stand Power adapter Software CD A/V Cable Quick installation guide Antenna Warranty card Remote Controller - 3 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Streszczenie treści zawartej na stronie nr. 5
Table of Contents Before You Use This Product....................................................................2 Package Contents ....................................................................................3 Table of Contents.....................................................................................1 Installation..............................................................................................4 Hardware Installation ......................................
Streszczenie treści zawartej na stronie nr. 6
Product Demo for E-business – Large-scale Service ..................... 22 If the web space has FTP service............................................... 23 If the web space has no FTP service .......................................... 24 Build a Security Application............................................................ 25 Build a Security Application............................................................ 26 Send Snapshots When Motion is Detected ...........................
Streszczenie treści zawartej na stronie nr. 7
Appendix ...............................................................................................58 A. Troubleshooting ............................................................................. 58 B. Cleaning the Lens........................................................................... 62 C. Pan/Tilt/Zoom Data ........................................................................ 63 D. URL Commands of the Network Camera ............................................ 64
Streszczenie treści zawartej na stronie nr. 8
Installation Hardware Installation Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in length. Connect the power adapter jack to the Network Camera before plugging in to the power socket. This will reduce the risk of accidental electric shock. Upon powering up, t
Streszczenie treści zawartej na stronie nr. 9
To install in wireless LAN If the Ethernet is not available while power on, the Network Camera will search for any access point with the SSID “default”. Once any access point is found, the LED will turn green to wait for installation. If the network environment cannot meet the default settings, install Network Camera in Ethernet to proceed with wireless LAN configuration. The Network Camera provides a general I/O terminal block with one digital input and one relay switch for devi
Streszczenie treści zawartej na stronie nr. 10
Software Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. At the end of the hardware installation, the Administrator must place the product software CD into the CD-ROM drive of the PC running in MS Windows. An auto-run program will pop up (If the program is not on auto-run, go to the root directory of the software CD and click on
Streszczenie treści zawartej na stronie nr. 11
Upon Installation Wizard’s start up, a searching box will pop up. This program searches for Vivotek’s product on the same LAN: After searching, Vivotek Video Servers or Network Cameras will be located by the Installation Wizard. There may be several entries shown in the window. The Administrator may differentiate the Network Cameras with the serial number. For the series number in the “Serial Number” field, please check the label on the bottom of the camera. - 7
Streszczenie treści zawartej na stronie nr. 12
The IP addresses shown in the "Current IP Address" field reflect those on the local network. They may be from the DHCP server. If there is no DHCP server, the camera will try to find a free IP address (this takes from 15 second to 3 minutes, depending on the LAN status). The method of finding IP address is seeking from 192.168.0.99, to 192.168.0.254. If any of the address inside this range is free, the Network Camera will be assigned to this IP address, and its subnet mask would
Streszczenie treści zawartej na stronie nr. 13
For more detailed usage of the Installation Wizard, please refer to the user’s manual of the Installation Wizard. - 9 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Streszczenie treści zawartej na stronie nr. 14
Initial Access to the Network Camera Installing Plug-in For the initial access to the Network Camera in Windows, the web browser may prompt for permission to install a new plug-in for the Network Camera after a period of time of downloading. Permission request depends on the Internet security settings of the user’s PC or notebook. If the highest security level is set, the computer may prohibit any installation and execution attempt. This plug-in has been registered for certificate an
Streszczenie treści zawartej na stronie nr. 15
Check Network Settings The Network Camera can be connected either before or immediately after software installation onto the Local Area Network. The Administrator should complete the network settings on the configuration page, including the correct subnet mask and IP address of gateway and DNS. Ask your network administrator or Internet service provider for the detail information. By default the Network Camera requires the Administrator to run installation every time it reboots. If th
Streszczenie treści zawartej na stronie nr. 16
How to Use Authentication After opening the web browser and typing in the URL of the Network Camera, a dialogue window pops up to request a username and password. The foreground is the login window and the background shows the message if authentication fails. The user may check the option box to save the password for future convenience. - 12 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Streszczenie treści zawartej na stronie nr. 17
Primary User’s Capabilities Main Screen with Camera View The main page layout has three parts: Configuration functions: The camera can be configured using these user interfaces. Camera View: What the camera sees. Pan/Tilt/Zoom control buttons: These buttons provide a command interface to control the aim of the camera. CCD control buttons: These buttons provide a command interface to control the aim of the camera. - 13 - www.vivotek.com T: 886-2-82455282 F: 886-2-824555
Streszczenie treści zawartej na stronie nr. 18
The Configuration: “Digital Output” Clicking on the “On” or “Off” button turns the digital output to either on or off status. “Snapshot” Clicking on the “Snapshot” can get a JPEG format image of the current camera view in another window. “Client Settings” Clicking on this button links you to the client setting page, please check the following session for more details. “Configuration” Only the Administrator can access camera configurations. The camera view The information bar
Streszczenie treści zawartej na stronie nr. 19
“Tilt speed” This selection box sets the moving range of the “Up” and “Down” commands. “Zoom speed” This selection box sets the moving range of the “zoom in” and “zoom out” commands. “Focus speed” This selection box sets the moving speed of the “focus near” and “focus far” commands. The focus function is obvious when the optical zoom time is larger than 7. “Auto pan” This button commands the camera to pan from the current position to the left-most and then to the right-mo
Streszczenie treści zawartej na stronie nr. 20
Client Settings There are four settings for the client side. Media Options - For the User to determine whether to receive video, audio or both. Protocol Options – Which allows choosing on connection protocol between client and server. There are two protocol choices to optimize your usage – UDP and HTTP. The UDP protocol allows for more real-time audio and video streams. However, some packets may be lost due to network burst traffic and images may be obscured. The HTTP protocol must
