Streszczenie treści zawartej na stronie nr. 1
BN68-00757A-X2Eng_001,116 7/26/04 2:20 PM Page 3
Owner’s Instructions
HP-P4271
This device is a Class B digital apparatus.
Streszczenie treści zawartej na stronie nr. 2
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 2 Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and i
Streszczenie treści zawartej na stronie nr. 3
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 3 User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 44 of this manual to reduce the degree of brightness and contrast of this screen when displaying a still image. Cell D
Streszczenie treści zawartej na stronie nr. 4
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 4 Table of Contents Listening to the Sound of the Sub(PIP) Picture ..69 General Information Selecting the Internal Mute............................70 Your New Plasma Display Panel ......................6 Remote Control Buttons ..................................8 Channel Control Wall Installation Instructions ..........................10 Fine Tuning Channels ..................................72 Installing the Speakers .............................
Streszczenie treści zawartej na stronie nr. 5
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 5 PLASMA DISPLA Y P ANEL General Information Your New Plasma Display Panel ......................................................6 Remote Control Buttons ..................................................................8 Wall Installation Instructions ..........................................................10 Installing the Speakers ..................................................................14 How to assemble the Stand-Base ............
Streszczenie treści zawartej na stronie nr. 6
BN68-00757A-00Eng_002~027 7/29/04 10:53 AM Page 6 Your New Plasma Display Panel Front Panel TOUCH buttons Speakers Press to operate the TV. Œ SOURCE button ˆ ENTER( ) button Press to display all of the available video sources Press to confirm a selection. (TV, AV1, AV2, AV3, S-VIDEO1, S-VIDEO2, Ø Power Indicator COMPONENT1, COMPONENT2, PC, DVI). - Power Off : Red ´ MENU button - Power On : Off Displays the main on-screen menu. - Timer On : Green ˇ VOL(+,-) button ∏ Press to increase or decr
Streszczenie treści zawartej na stronie nr. 7
BN68-00757A-00Eng_002~027 7/29/04 10:53 AM Page 7 Side of the TV Ferrite Cores The ferrite cores are used to S-Video Input attenuate undesired signals. When connecting cables, attach one of these ferrite cores to the cable near Video Input the connector. When you connect Side AV cable to the AV3/L-AUDIO-R, first bind Audio Input (L, R) the ferrite core around the Side AV Cable round to secure it. Rear Panel ŒDVI INPUT (DVI-D / L-AUDIO-R) ∏AV1, AV2, AV3 Connect to the digital video and audi
Streszczenie treści zawartej na stronie nr. 8
BN68-00757A-00Eng_002~027 7/29/04 10:53 AM Page 8 Remote Control Buttons Remote Control ŒPOWER button Turns the PDP on and off. ´ASPECT button Press to change the screen size. ˇNumber buttons ¨+100 button Press to select channels over 100. For example, to select channel 121, press “+100”, then press “2” and “1.” ˆMUTE button Press to mute the PDP sound. ØVOL (Volume) buttons Use it to adjust volume. ∏Anynet button Runs the Anynet view functions and sets up the Anynet devices. ”MENU button Dis
Streszczenie treści zawartej na stronie nr. 9
BN68-00757A-00Eng_002~027 7/29/04 10:53 AM Page 9 ¸SRS TSXT button Selects Trusurround XT mode. ˛ MTS button Press to choose stereo, mono or Separate Audio Pro- gram (SAP broadcast). ◊AUTO PROG. button The TV automatically cycles through all of the avail- able channels and stores them in memory. ±ADD/DEL button Press to add or delete channels in the TV’s memory. ≠DNIe button Activates DNIe (Digital Natural Image engine). –CAPTION button Controls the caption decoder. —SET button Used during s
Streszczenie treści zawartej na stronie nr. 10
BN68-00757A-00Eng_002~027 7/29/04 10:54 AM Page 10 Wall Installation Instructions Installation Notes Do not install the PDP on any location other than a vertical wall. 1 To protect the performance of the PDP and prevent problems, avoid the following locations: 2 • Do not install next to smoke and fire detectors. • Do not install in an area subjected to vibration or high voltage. • Do not install near or around any heating apparatus. Use only recommended parts and components. 3 Parts (Wall
Streszczenie treści zawartej na stronie nr. 11
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 11 How to assemble the Wall Mount Bracket The wall mount comes packaged in 3 parts. These parts must be assembled together. Please tighten the captive screw in the direction of the arrow after assembling 1 the bracket. Install the Wall Mount Bracket after the screws are securely inserted into the wall. Captive Screws ASSY-HINGE (LEFT) Wall Mount Bracket Separate ASSY-HINGE into Left and Right. ASSY-HINGE (RIGHT) After installing the Wall Moun
Streszczenie treści zawartej na stronie nr. 12
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 12 Wall Installation Instructions Fixing the PDP panel to the wall attachment panel bracket Remove the screws from the back of the PDP. 1 Connect insulation holders to screws (see the illustration below). 2 • If you are uncertain about installation, hire a specialist to install the wall mount bracket. • Be sure to check that the insulation holders are completely secured on both the left and right side after hanging the PDP on the wall mount bra
Streszczenie treści zawartej na stronie nr. 13
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 13 How to Adjust Mounting Angle Note: Please secure the mounting bracket on the wall surface after setting its angle at 0°. Factory default How to Adjust Mounting Angle Please tighten the captive screw in the direction Hold onto the middle of the PDP to adjust of the arrow after assembling the bracket. the angle (not the sides of the PDP). Change Angle Secure the SET to the wall mount bracket. (Please refer to the following instructions.) 1 Set
Streszczenie treści zawartej na stronie nr. 14
BN68-00757A-00Eng_002~027 7/29/04 11:29 AM Page 14 Installing the Speakers This speaker installation guide is for the PSN5040 (BN96-00712A) speakers. The speakers are sold separately. Parts Speakers Middle Cabinet Speaker Dust Cover (Wall Mount Only) 1EA 1EA 2EA Speaker Cable Screws 1EA Screw 8EA How to Assemble the Speakers (when using the stand) Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides). 1 14
Streszczenie treści zawartej na stronie nr. 15
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 15 Set the Speaker Guide Bracket into the square grooves located on either side of the PDP’s bottom rear, then push the Speaker Guide Bracket towards the center (as the 2 arrow illustrates). Secure the Speaker Guide Bracket with provided screws. (Always use the proper screws, as indicated.) Screw② Secure the Speaker Dust Cover by setting it into the grooves located on the front side of the speakers. 3 Connect the speakers to the PDP using the
Streszczenie treści zawartej na stronie nr. 16
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 16 Installing the Speakers How to Assemble the Speakers (Wall Mount) Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides, 2 screws on the center). 1 Set the Speaker Guide Bracket into the square grooves located on either side of the PDP’s bottom rear, then push the Speaker Guide Bracket towards the center (as the 2 arrow illustrates). Secure the Speaker Guide Bracket with provided screws. Secure the Middle
Streszczenie treści zawartej na stronie nr. 17
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 17 Secure the Speaker Dust Cover by setting it into the grooves located on the front side of the speakers. 3 Connect the speakers to the PDP using the speaker cables. The connection terminals are on the rear side of both the PDP and the speakers. 4 (Match the color coded terminals and cables.) BLACK RED BLACK RED When you connect the speaker wire to the external speaker out connector, first bind the speaker wire round the ferrite core to secu
Streszczenie treści zawartej na stronie nr. 18
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 18 How to assemble the Stand-Base Firmly secure the pegs to the both sides of the Stand Base using 8 screws provided. 1 Using the 4 screws for securing the Stand Pegs and the Monitor, firmly attach the Monitor to the Stand Pegs. (The exterior of the SET may be different than the picture.) 2 Warning Firmly secure the stand for the PDP before moving it, as the stand may fall and could cause serious injury. ➤ Two or more people should carry the P
Streszczenie treści zawartej na stronie nr. 19
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 19 PLASMA DISPLA Y P ANEL Connections Connecting VHF and UHF Antennas ..............................................20 Connecting Cable TV....................................................................21 Connecting a VCR........................................................................23 Connecting a Camcorder ..............................................................24 Connecting a DVD Player.......................................
Streszczenie treści zawartej na stronie nr. 20
BN68-00757A-X1Eng_002~027 7/26/04 1:37 PM Page 20 Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. Plug the antenna lead into the VHF/UHF terminal on the PDP. 1 Use the Antenna Cable, an accessory included in the product package. 20
