Streszczenie treści zawartej na stronie nr. 1
OWNER’S MANUAL
L3040
HUMAX USA, INC.
Please contact us at:
866.Humax.USA
(866.486.2987)
Humax USA, Inc.
3601 West Garry Ave
Santa Ana, CA 92704
www.humaxusa.com
Streszczenie treści zawartej na stronie nr. 2
2
Streszczenie treści zawartej na stronie nr. 3
Important Safety Instructions CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this device. This symbol alerts you that important literature concerning operation and maintenance has been included with this device. WARNING : DO NOT EXPOSE THIS DEVICE TO DRIPPING OR S
Streszczenie treści zawartej na stronie nr. 4
Important Safety Instructions Important Safeguards for You and Your New Device Always be careful when using your LCD TV. To reduce the risk of fire, electric shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your LCD TV. 1. Read these instructions. 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions 5. Do not use this device near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings.
Streszczenie treści zawartej na stronie nr. 5
Important Safety Instructions 18. If an outside antenna or cable system is connected to the device, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the U.S. National Electrical Code, ANSI/NFPA 70 provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of anten
Streszczenie treści zawartej na stronie nr. 6
User Instructions Recommendation to Avoid or Minimize Phosphor Burn-in: Like all phosphor-based display devices and all TFT LCD Displays, LCD TV' s can be susceptible to phosphor burn under certain circumstances. Certain operating conditions, such as the continuous display of a static image over a prolonged period of time, can result in phosphor burn if proper precautions are not taken. To protect your investment in this LCD TV, please adhere to the following guidelines and recommendations for m
Streszczenie treści zawartej na stronie nr. 7
Table of Contents SOUND START-UP ● Part Names and Functions ..............................8~9 ● Changing the Sound Standard ..........................31 ● Checking Parts ..................................................10 ● Customizing the Sound......................................31 ● Battery Installation and Replacement ................10 ● Setting the BBE Mode .......................................32 ● Setting the Surround Effect ...............................32 CONNECTION ● Selecting the
Streszczenie treści zawartej na stronie nr. 8
Part Names and Functions FRONT VIEW SPEAKER POWER/LED IR Receiver Menu : Displays the On screen Display (OSD). Source : Displays an available video source (i.e. RGB, DVI, Video, S-Video, TV, Component1 and Component2). Also functions as the Select button in the On screen Display (OSD). Volume Up and Down : Volume Up and Down : Adjusts the volume. Also functions as Adjust (-/+) button in the On screen Display. Channel Up and Down : Changes the channel. Also Functions as Move in the On screen
Streszczenie treści zawartej na stronie nr. 9
Part Names and Functions REAR VIEW Bottom View Component1 Audio VHF/UHF For connecting outdoor Antenna Input an audio signal from a DVD player or DTV receiver. RS-232C Component2 Audio This terminal is used when control functions Input an audio signal from a DVD player or DTV need to be operated externally by PC. receiver. DVI S-Video Input a digital video signal (TMDS/HDCP) Input an S-VHS signal from VCR or DVD player. from your PC or DTV receiver. Video RGB(D-sub 15pin) Input a video (CVB
Streszczenie treści zawartej na stronie nr. 10
Checking Parts Checking parts User’s Manual Remote Control Batteries(AAA) Power Cord Warranty Card Battery Installation and Replacement Insert four AAA batteries. Make sure to insert them with the proper polarity. 1 2 3 Press and open the cover. Align the batteries according Close the cover. to the (+) and (-) as indicated inside the case. 10
Streszczenie treści zawartej na stronie nr. 11
Connection Connecting VHF and UHF Antennas Connecting an Outdoor Antenna For the best reception, we recommend you use an outdoor antenna. Severely weathered antennas and antenna cables can reduce the signal quality. Before making any connections, inspect all antenna hardware; any service center can explain the various outdoor antennas available to you. 300-Ohm Flat wire 1. Connect the 300-ohm flat wire to the screws on the 300-ohm adapter. 2. Push the end of 300- to 75-ohm adapter into the 75-oh
Streszczenie treści zawartej na stronie nr. 12
Connection Connecting a VCR (Composite Video) Rear of the LCD TV VCR / Cable box 1. Connect video cable(not supplied) to the VIDEO INPUT jack on the LCD TV and the video output jack on the external equipments.(VCR/Cable box, etc.,) 2. Connect audio cables(not supplied) to the AUDIO INPUT(L, R) jack on the LCD TV and the audio output jack on the external equipments.(VCR/Cable box, etc.,) To Play VCR / Cable box : 1. Turn on your external equipments(VCR / Cable box, etc.,) and press the play b
Streszczenie treści zawartej na stronie nr. 13
Connection Connecting a DVD player (Component Video) Rear of the LCD TV DVD Player 1. Connect video cables(not supplied) to the Y, Cb/Pb, Cr/Pr input jacks(Component 1 or 2) on the LCD TV and the video output jacks on the DVD player. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks(Component 1 or 2) on the LCD TV and the output jacks on the DVD player. NOTE : You must match the color-coded connectors with a compatible DVD player. To Play DVD : 1. Turn on your DVD player; insert
Streszczenie treści zawartej na stronie nr. 14
Connection Connecting a DTV receiver( DVI ) Rear of the LCD TV Audio Cable DVI-I 29pin Cable Digital Set-Top Box 1. Connect a DVI cable(not supplied) to the DIGITAL PC INPUT jack on the LCD TV and DVI with HDCP OUTPUT jack on the digital Set-Top Box. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jacks on the digital Set-Top Box. To Watch DTV : 1. Turn on the your Digital Set-Top-Box. 2. Turn on LCD TV and press the SOURCE button to select DVI 3.
Streszczenie treści zawartej na stronie nr. 15
Connection Connecting a PC ( DVI ) Rear of the LCD TV PC DVI-I 29pin Cable Audio Cable 1. Connect a DVI 29pin cable(not supplied) to the DIGITAL PC INPUT jack on the LCD TV and DVI output jack on the PC. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jack on the PC. NOTE : When you connect a DVI, Please note the Analog input is not supported. To watch the PC screen : 1. Turn on LCD TV and press the SOURCE button to select the DVI. 2. Turn on PC a
Streszczenie treści zawartej na stronie nr. 16
Connection Connecting a PC ( RGB) Rear of the LCD TV PC Audio Cable PC cable (D-sub 15pin) 1. Connect a PC cable, D-sub 15pin(not supplied) to the ANALOG PC INPUT jack on the LCD TV and RGB output jack on the PC. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jack on the PC. To watch the PC screen : 1. Turn on LCD TV and press the SOURCE button to select the RGB. 2. Turn on PC and check for PC system requirements. Refer to the ‘Operation with a
Streszczenie treści zawartej na stronie nr. 17
Remote Control Buttons POWER : Switches Power ON/OFF. SOURCE : Press this button to select a video source from among Video, S- Video, Component1, Component2, RGB and DVI. MUTE : Mutes the sound. S-SWAP : Exchanges main sound with sub- sound. SELECT : Press this button to select a menu item or to enter the sub-menu. JOYSTICK : Adjust, Move. Use these buttons to move the cursor and adjust the values of the menu items. SURROUND : Press this button to hear 3D sound. STILL : Freezes the PIP
Streszczenie treści zawartej na stronie nr. 18
LCD Window Feature This remote control is MBR (Multi-Brand Remote Control). This means you can control all products (TV, MNT, VCR, DVD, CBL, STB), including other manufacturers, using this remote control. LCD window feature 1. Function Icons Select when you want to control a product other than this LCD TV. Select when you want to know the code for this remote control. Select when you want to set the fixed button. 2. Status Icons Indicates that the button you pressed is not operating. Indicates t
Streszczenie treści zawartej na stronie nr. 19
How to Control Other Brand Products Setting Up the MBR CASE 1 Follow the process below when you know the remote control code of the product you want to control, or when you have the code table as on page 58~60. Turn on the product you want to control. Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window. Using the buttons, select the produ
Streszczenie treści zawartej na stronie nr. 20
Setting Up the MBR CASE 2 Follow the process below when you don't know the remote control code of the product you want to control, or when you don't have the code table as on page 58~60. Turn on the product you want to control. Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window. Using the buttons, select the product you want to control
