Streszczenie treści zawartej na stronie nr. 1
LC-20B1U
MENU
20B1UCover 02.02.08
LC-20B1U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR À CRISTAUX
LIQUIDES
TELEVISOR DE CRISTAL
SHARP ELECTRONICS CORPORATION
LÍQUIDO
Sharp Plaza, Mahwah, New Jersey 07430-2135
TELEVISOR DE CRISTAL
SHARP CORPORATION
LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
Printed in Japan
Imprimé au Japon
Printed on post-consumer recycled paper.
Impreso en Japón
Imprimé sur du papier recyclé.
Impresso no Japão
Impreso en papel reciclado.
TINS-A109WJZZ
Streszczenie treści zawartej na stronie nr. 2
LC-20B1U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow- head symbol, within an equilat- eral triangle, is intended to alert CAUTION the user to the presence of uninsulated “dangerous voltage” RISK OF ELECTRIC SHOCK. within the product’s enclosure DO NOT OPEN. that may be of sufficient magnitude to constitute a risk of electric shock to p
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT INFORMATION WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. U.S.A. ONLY CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. “Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines
Streszczenie treści zawartej na stronie nr. 4
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precau- tions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improp
Streszczenie treści zawartej na stronie nr. 5
IMPORTANT SAFETY PRECAUTIONS (Continued) Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product
Streszczenie treści zawartej na stronie nr. 6
IMPORTANT SAFETY PRECAUTIONS (Continued) If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, Iocation of antenna-discharge unit, connect
Streszczenie treści zawartej na stronie nr. 7
CONTENTS Page DEAR SHARP CUSTOMER .............................................................................................................3 IMPORTANT SAFETY PRECAUTIONS .......................................................................................3-5 SUPPLIED ACCESSORIES ............................................................................................................. 7 PREPARATION...........................................................................................
Streszczenie treści zawartej na stronie nr. 8
M E NU SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product. “AAA” size (UM/SUM-4) Dry Battery (×2) Remote Control RRMCGA051WJSA UBATU0038CEZZ AC Cord Antenna Cable RRMCG1559CESA QCNWG0003CEPA QACCD3097CEPA AC Adapter Operation Manual Cable Clamp (×2) LC-20B1U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR À CRISTAUX LIQUIDES TELEVISOR DE CRISTAL LÍQUIDO TELEVISOR DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D’EMPLOI MANUAL DE MANEJO MANUAL DE OPERAÇÃO UADP-024
Streszczenie treści zawartej na stronie nr. 9
PREPARATION Using the Remote Control Use the remote control by pointing it towards the remote sensor window. Objects between the remote control and sensor window may prevent proper operation. Cautions regarding use of remote control Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
Streszczenie treści zawartej na stronie nr. 10
PREPARATION (Continued) Power Connection Household power outlet Plug into AC outlet. AC adapter AC cord To DC input terminal (DC 13V) Note Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet. Always turn the main POWER switch of the LCD TV set to off when connecting the AC adapter. Always unplug the AC adapter from the product and power outlet when not using for a long period of time. Antenna Connection CABLE TV (CATV) CONNECTION • A 75-oh
Streszczenie treści zawartej na stronie nr. 11
PREPARATION (Continued) Antenna Connection (Continued) ANTENNAS • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. F-type connector 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached t
Streszczenie treści zawartej na stronie nr. 12
POWER SLEEP FRONT AND REAR CONTROL OPTIONS Main unit (front view) Upper control panel MENU TV/VIDEO MAIN POWER VOL CH MAIN POWER TV/VIDEO MENU CH ( )/( ) VOL (–)/(+) Speaker Speaker PC Card slot To change the vertical angle of the LCD TV set, tilt the screen up to 10 degrees forward or 20 degrees backward. The TV set can also be rotated 90 degrees horizontally. Please adjust the angle so that the TV set can be watched most comfortably. SLEEP indicator The SLEEP indicator lights up red when the S
Streszczenie treści zawartej na stronie nr. 13
VIDEO AV-IN1 L AUDIO R S-VIDEO HEAD PHONE ANT. POWER INPUT DC13V FRONT AND REAR CONTROL OPTIONS (Continued) Main unit (rear view) VIDEO AUDIO (L) AV-IN2/OUT AUDIO (R) Y PB PR COMPONENT AUDIO (L) AUDIO (R) VIDEO AUDIO (L) AV-IN1 PC Card PC Card AUDIO (R) PC Card slot S-VIDEO HEADPHONE Antenna terminal POWER INPUT (DC 13V) 12 LC-20B1U-GBpp01-18 12 02.2.21, 4:44 PM VIDEO AV-IN2/OUT L AUDIO R COMPONENT Y PB PR L AUDIO R VOL CHMENU TV/VIDEO MAIN POWER
Streszczenie treści zawartej na stronie nr. 14
FRONT AND REAR CONTROL OPTIONS (Continued) Removing the Back Cover Before connecting a connection cord into the rear terminal, remove the back cover. Push in the tab and pull out the back cover carefully. To mount the cover, insert the 2 hooks on the bottom of the cover into the cabinet and press on the upper part of the back cover until the tab locks in place with a click. Listening with Headphones Plug the headphone mini-plug into the HEADPHONE jack located on the rear of the TV set. O
Streszczenie treści zawartej na stronie nr. 15
REMOTE CONTROL POWER POWER ENTER/ DISPLAY ]/[/(Cursor control) 1 DISPLAY* SLEEP CARD 2 CARD* SLEEP ENTER MUTE BRIGHT MENU TV/VIDEO TV/VIDEO MUTE MENU BRIGHT FLASHBACK 3 FLASHBACK* VOL CH VOL(+)/(–) CH ( )/( ) 1 2 3 4 5 6 Channel Select 7 8 9 4 MTS 0 100 MTS* 1 * Displays the receiving channel for 10 seconds. 2 * Turns on CARD mode to play back a memory card. 3 * Returns to the previous channel. 4 * Selects audio settings. BASIC OPERATION This product is factory set to comply with the TV broad
Streszczenie treści zawartej na stronie nr. 16
BASIC OPERATION (Continued) Turning on POWER MAIN POWER 1 Press MAIN POWER, located on On-screen display the upper side of the main unit, to 2 on. 2 The POWER indicator instantane- ously changes from red to green and the main unit is turned on. STEREO
Streszczenie treści zawartej na stronie nr. 17
BASIC OPERATION (Continued) Sound Volume 1 Press VOL (+) to increase the sound POWER volume. The segment of the indicator increases. DISPLAY VOLUME 50 SLEEP CARD ENTER 2 Press VOL (–) to decrease the sound MUTE BRIGHT MENU TV/VIDEO volume. The segment of the indicator decreases. FLASHBACK VOLUME VOL CH MUTE 10 To mute the sound 1 2 3 VOL 4 5 6 1 Press MUTE to temporarily turn off (+)/(–) 7 8 9 the sound. MTS 0 100 The MUTE mark is displayed for MTS 4 seconds. 2 Press MUTE or VOL (+)/(–) to turn
Streszczenie treści zawartej na stronie nr. 18
BASIC OPERATION (Continued) Changing the Channels Changing channels by using Channel Select on the remote control • This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2- or 3-digit number. To select a 1- or 2-digit channel POWER 0– number (e.g., Channel 5): DISPLAY Complete the following procedure SLEEP CARD 5 within 4 seconds. ENTER 1 Press the button. MUTE BRIGHT MENU TV/VIDEO 5 2 Press the button. FLASHBACK VOL CH Note When selecting a 1-digi
Streszczenie treści zawartej na stronie nr. 19
SELECTING MENU ITEMS Selecting Menu Items • This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired menu item by following the steps below and then refer to the indicated page for details. (Page 19) 1 Press MENU to display the MENU POWER SLEEP TIMER RETURN screen. SLEEP TIMER [ ––– REMAIN] DISPLAY SLEEP CARD 2 Press ]/[ to select the desired menu item, and press ENTER. ENTER 3 Press MENU to exit. MUTE BRIGHT MENU TV/VIDEO ENTER/ ENTER MENU SELECT : ENT
Streszczenie treści zawartej na stronie nr. 20
ADJUSTMENT Adjusting the SLEEP TIMER Settings You can set the SLEEP TIMER to automatically turn off the TV. SLEEP Directly setting the SLEEP TIMER POWER 1 Press SLEEP to display the SLEEP TIMER screen. DISPLAY SLEEP CARD 2 Press SLEEP to set the sleep timer (in minutes). ENTER MUTE BRIGHT MENU TV/VIDEO The time can be set in increments ENTER/ of 30 minutes and in the range FLASHBACK VOL CH ]/[/ between 30 and 120 minutes. ––– REMAIN The SLEEP TIMER is turned off 1 2 3 MENU when --- is displa
