Streszczenie treści zawartej na stronie nr. 1
USER GUIDE
VXI BlueParrott B10
VXI BlueParrott TalkPro B10-GTX
Wireless Bluetooth Headsets
Streszczenie treści zawartej na stronie nr. 2
VXI. Connecting people to a digital world. 2
Streszczenie treści zawartej na stronie nr. 3
Table of Contents Basic Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Operation Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Compatibility Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Maximizing Range . . . .
Streszczenie treści zawartej na stronie nr. 4
BASIC SAFETY INSTRUCTIONS CAUTION Do not use headset while it is being charged in a VXI BlueParrott B50 charger. Danger of explosion if battery incorrectly replaced. Replace only with the same or equivalent battery type as recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Do not dispose of batteries in fire, as they could explode. Do not immerse the headset in water. Plastic bags and small parts may cause choking if ingested. Keep them away
Streszczenie treści zawartej na stronie nr. 5
PRODUCT FEATURES Adjustable headband T-bar Multi-function button with indicator lights Noise canceling microphone Volume (increase)/Mute control Volume (decrease) Note: The B10-GTX has a more sensitive microphone for superior accuracy results with speech recognition applications. 5
Streszczenie treści zawartej na stronie nr. 6
GLOSSARY OF TERMS Standby Mode – Headset is on, but not in Talk Time mode. The yellow indicator light will flash slowly, every 4-5 seconds. Standby Mode is automatic after remov- ing headset from the charger. Standby time is up to 100 hours on a full charge. Talk Time Mode – Talk Time Mode refers to the time that the headset is on and utilizing Talk Time. The yellow indicator light will flash rapidly, about once every second. Talk TIme is approximately 6 hours on a full charge. Pair / Pairing –
Streszczenie treści zawartej na stronie nr. 7
MAXIMIZING RANGE The range of communication distance between the headset and another Bluetooth device varies as follows. If the headset is being used with a Bluetooth cellular phone, PDA or computer, the range is typically the same as the Bluetooth standard of 33 feet. However, some of these Bluetooth devices may have other enhancements to provide longer range. Please consult your Bluetooth device’s user manual or contact the Bluetooth device manufacturer for more information. The range of commu
Streszczenie treści zawartej na stronie nr. 8
CHARGING THE HEADSET Before first time operation, the headset must be charged for 4-8 hours*. The headset can be charged with a VXI BlueParrott B50 charger (see photo at left) or by being placed in the base unit of a VXI BlueParrott wireless headset system (see photo at right). For additional instructions con- sult the user guide that accompanies the B50 charger or the BlueParrott base unit. *Charge times vary according to the different charging units that are available to be used with this he
Streszczenie treści zawartej na stronie nr. 9
LOW BATTERY INDICATION When the headset battery is at the end of its charge, you will hear tones and/or beeps in the headset. This will happen when you are not pressing any control but- tons. When you hear these tones/beeps, switch immediately to your phone handset. If the headset loses power before you switch over, you will not lose the call. Activate your handset to resume your conversation. Place the headset back in the charger. BATTERY INFORMATION The BlueParrott battery is guaranteed for on
Streszczenie treści zawartej na stronie nr. 10
HEADSET ADJUSTMENTS / MICROPHONE POSITIONING See page 5 for product features. Headset Adjustment 1. Place the headset on your head with the ear cushion on your left or right ear. 2. Swivel microphone boom up and over, if necessary, to bring it to the chosen side. 3. Place T-bar on the side of your head above your ear. 4. Slide headband in or out for a secure fit. Microphone Positioning Microphone positioning is very important to ensure proper microphone performance. 1. The microphone has the wo
Streszczenie treści zawartej na stronie nr. 11
BASIC OPERATIONS See page 5 for location of button controls. Standby Mode / Talk Time The headset is automatically in Standby Mode when you remove it from the charger, therefore, a single press of the multifunction button will put the headset into Talk Time mode (you will hear a single beep). When the headset is in Standby Mode the yellow indicator light on the headset will flash slowly, every 4-5 seconds. If the yellow light is not flashing, turn the headset on (instructions below). Since sta
Streszczenie treści zawartej na stronie nr. 12
PAIRING See page 5 for location of button controls. You must pair the headset with your Bluetooth device before first use. Before Pairing: Turn the Headset Off If the yellow light on the headset is flashing (you may need to wait 5 seconds to see it), then you must turn the headset off before pairing, as follows: Press and hold down the multifunction button on the headset for about 3 seconds. You will hear 3 beeps in the headset that descend in tone (hold it up to your ear) and the yellow light
Streszczenie treści zawartej na stronie nr. 13
You will hear two series of melodic tones (hold it up to your ear). The yellow and red indicator lights on the headset will flash alternately. Release the multifunction button. This puts the headset in pairing mode. 4. Refer to your other Bluetooth device’s user manual for instructions on how to pair the other Bluetooth device to the headset. The device passcode must be set to 0000. 5. When the red indicator light on the headset stops flashing, pairing has been com- pleted (consult the o
Streszczenie treści zawartej na stronie nr. 14
HEADSET VOLUME AND MUTE CONTROLS see Product Features page 5 Adjust Speaker Volume To adjust the volume in your earpiece, press the increase or decrease volume button for 1 second, then release. Repeat until volume is at desired level. You will hear a sin- gle beep each time you press the button. You may also be able to adjust speaker vol- ume on your other Bluetooth device (such as a cell phone). Check the product owner’s manual for more information. Mute The Microphone On The Headset To mute t
Streszczenie treści zawartej na stronie nr. 15
4. To end the call, press the multifunction button on the headset for 1 second. You will hear a beep and the headset will disconnect from the call. Deactivate your cellular phone. Answer A Call / End A Call Before answering, make sure the headset is on (page 11). 1. Put the headset on and position the microphone properly (page 10). 2. If the headset is in Standby Mode (see page 11), put the headset into Talk Time mode by pressing the multifunction button on the headset for 1 second, then releas
Streszczenie treści zawartej na stronie nr. 16
USING THE HEADSET WITH OTHER BLUETOOTH DEVICES Before use, make sure the headset is on (page 11). To use the headset with a VXI BlueParrott base, consult the user guide that came with the base. For use with Bluetooth cell phones, see page 14. For all other non-VXI products, please read below. 1. Put the headset on and position the microphone properly. 2. Put the headset in Talk Time mode by pressing the multifunction button on the headset for 1 second, then release. 3. Activate your other Bluet
Streszczenie treści zawartej na stronie nr. 17
VISUAL AND AUDIO INDICATORS EXPLAINED Headset Indicator Lights / While In Charger: Multifunction button not lit Headset not receiving charge Green light Fully charged/Okay to use Red light Partially charged/okay to use Headset Indicator Lights / While Off Charger: Yellow flashing slowly, every 4-5 seconds In Standby Mode Yellow flashing faster, every second In Talk Time Mode No lights Headset off Red/yellow lights flash alternately, then red stops Pairing successful Headset Audio Indicators: 3
Streszczenie treści zawartej na stronie nr. 18
FAQS / TROUBLESHOOTING Why don't I hear a dial tone (phone or VoIP applications)? 1. Make sure the headset is turned on (page 11). 2. Were the Bluetooth units paired together before first use (page 12)? 3. Be sure that the headset connection has been activated on the other Bluetooth device.* How long do I have to charge the headset before I can use it? You should charge the headset for 4 consecutive hours before first use. After that, the headset will continue to charge any time it is mounted
Streszczenie treści zawartej na stronie nr. 19
Why do I have the sensation of hearing my own voice too loudly in my ear? (this is called “excessive sidetone”) 1. First, check and establish acceptable volume settings on the phone’s handset. 2. Move the microphone slightly away from your mouth. 3. Reduce the speaker volume level on the headset (page 14) 4. If your Bluetooth device has a microphone volume adjustment, reduce the vol- ume level. Some VXI BlueParrott base units have a microphone volume adjust- ment on the bottom of the unit. * F
Streszczenie treści zawartej na stronie nr. 20
USA FCC Part 15 FCC Notice to Users/Product Statements This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modifications not approved by VXI Corporation will void the user’s authority to opera
