Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
Contents What You Get ............................................................................................................................................... 1 Product Layout ............................................................................................................................................ 2 Setting Up .................................................................................................................................................... 6 Setting Up-C
Streszczenie treści zawartej na stronie nr. 3
What You Get Receiver Monitor Camera • One Camera • One Monitor • Two Power Adapters • One Quick Installation Guide • This User's Manual Note: The AC adapters CANNOT be interchanged. Use only the adapter labeled OUTPUT: 9V DC with the camera. Use only the adapter labeled OUTPUT: 13.5V DC with the monitor 1 PDF created with FinePrint pdfFactory trial version www.pdffactory.com English
Streszczenie treści zawartej na stronie nr. 4
Product Layout Front View of Bottom View of Camera Rear View of Camera Camera 1 10 5 2 11 3 6 4 7 9 8 2 PDF created with FinePrint pdfFactory trial version www.pdffactory.com
Streszczenie treści zawartej na stronie nr. 5
Product Layout 1 Infrared LEDs Eight LEDs to provide infrared light for night vision. 2 Lens Focuses image automatically without any adjustment. 3 Lens Body Rotates up to 180 degrees. 4 Microphone 5 2.4 GHz Audio/Video Antenna (Front ) Transmits audio/video signals. Caution: Antenna does not rotate freely through 360 degrees. (See "Orienting Units for Optimal Performance", on page 12 6 Channel Selection Switch Select the channel by sliding the slide switch to the channel number you want. Must s
Streszczenie treści zawartej na stronie nr. 6
Product Layout Rear View of Bottom View of Monitor Monitor Front View of Monitor 11 12 10 4 9 5 8 6 7 3 1 2 4 PDF created with FinePrint pdfFactory trial version www.pdffactory.com
Streszczenie treści zawartej na stronie nr. 7
Product Layout 1 Volume/Power Control 2 Screen ON/OFF Screen can be turned off for audio monitoring only. 3 Power Indicator LED 4 13.5V Power Adapter Plug 5 Channel Selection Dipswitches Select the channel by setting the channel dipswitch to the ON position. The number 5 dipswitch sets the timer for the auto-sequence function (see "Auto-Sequence Function for Multiple Location Monitoring", on page 13 ). Must select the same channel both on monitor and receiver. 6 Audio Output Jack (White) Vid
Streszczenie treści zawartej na stronie nr. 8
Setting Up Before you make the connection: • Always make sure the unit ON/OFF switch is in the OFF position. • Set the channel switches on the back of the camera and monitor to the same channel. Monitor Camera • If you wish to wall mount the camera, it is recommended that the receiver reception be tested before fixing in place. Have one person hold the camera against the wall in the selected mounting area while another checks reception on the monitor. If interference or other problems are pres
Streszczenie treści zawartej na stronie nr. 9
Setting Up-Camera Power Supply 1 The camera uses either batteries (AA-size) or household AC current. To Load Batteries Open the battery compartment cover. 1 Insert batteries so their plus (+) and minus (-) ends are 2 facing as shown in the illustration. Close the battery compartment cover. Make sure the 3 battery compartment cover is locked securely. Never mix old batteries with new ones. Remove batteries from the camera if you do not plan to use it for a period of time. Using AC Power Plug one
Streszczenie treści zawartej na stronie nr. 10
Setting Up-Camera Changing the Lens Orientation 2 Place the camera in a convenient location, point the lens towards the observation area and adjust the angle by rotating the lens body. The camera's auto focus feature automatically focuses the image. The camera's head rotates horizontally up to 200 degrees and vertically up to 30 degrees. The lens is built into a lens body that is designed to rotate vertically up to 180 degrees, allowing the camera to cover the widest angles. Rotates up to 90 t
Streszczenie treści zawartej na stronie nr. 11
Setting Up-Monitor Power Supply 1 The monitor uses either batteries (C-size) or household AC current. To Load Batteries Open the battery compartment cover in the direction of the arrow. 1 Insert batteries so their plus (+) and minus (-) ends are facing as shown in the 2 illustration. 3 Close the battery compartment cover. Make sure the battery compartment cover is locked securely. Never mix old batteries with new ones. Remove batteries from the camera if you do not plan to use it for a period o
Streszczenie treści zawartej na stronie nr. 12
Setting Up-Monitor Using AC Power Plug one end of the provided power adapter into a wall outlet and the other end into the rear of the monitor. Note: Use the adapter labeled OUTPUT: 13.5V DC. Turn on the monitor. The LED on the front of the monitor should light. Fine Tuning 2 Adjust the video image using the V-HOLD, CONTRAST and BRIGHTNESS 1 adjustment knobs on the back of the monitor, as needed. 2 Place the monitor in a convenient location, then adjust its antenna so that the front (curved fa
Streszczenie treści zawartej na stronie nr. 13
Setting Up-Other Applications Recording on a VCR The monitor comes with Audio/Video output jacks for connecting to a VCR for recording. Connect the audio/video cable’s white and yellow plugs Audio Video IN to the white and yellow audio/aideo jacks of the monitor (White) (Yellow) and to the white and yellow input jacks of the VCR, (White) (Yellow) matching the plug colors with the jacks on both the monitor and VCR. Night Vision The camera has eight high-intensity LEDs for picking up clear images
Streszczenie treści zawartej na stronie nr. 14
Orienting Units for Optimal Performance Placing: Place the camera and monitor on a flat, stable surface to prevent damage from falling. For optimal performance, try to place the units as high as possible to avoid any possible interference from people walking between the camera and monitor. Microwave ovens can cause interference. Be sure you do not position the camera and monitor with a microwave in the path between them. Adjusting the Audio/Video Antennas For optimal reception, the antennas on
Streszczenie treści zawartej na stronie nr. 15
Auto-Sequence Function for Multiple Location Monitoring The monitor's built in auto-sequence function is ideal for security use. The monitor can be used with up to four cameras on four different channels and display them in sequence on a single monitor. The monitor's various operating modes are set via dipswitches as shown in the following diagram: Factory-Preset Mode Dipswitches 1 ~ 4: Set up the automatic channel sequence function Slide the channel dipswitch that you wish to view to the ON
Streszczenie treści zawartej na stronie nr. 16
Auto-Sequence Function for Multiple Location Monitoring Note 1: The monitor will auto detect the receiving channels, and display them in sequence. When only one channel dip switch is in the ON position, the monitor will receive the channel continuously, without regard to the position of the 5th dip switch. If more than one dip switch remains on, the auto-sequence function will continue on those channels. Note 2: When none of the dip switches are in the ON position, the monitor will automatic
Streszczenie treści zawartej na stronie nr. 17
Troubleshooting If you are not getting any signal at all • Check the power on the camera and monitor • Make sure power plugs are pushed all the way in • Check the CHANNEL switches on both camera and monitor are set to the same number • If the camera/monitor is powered by batteries, replace all batteries with new ones • If you can receive sound, but don't have images, or the images are poor, check the SCREEN ON/ OFF button on the front panel, or adjust the V-HOLD/ CONTRAST/BRIGHTNESS knob on the
Streszczenie treści zawartej na stronie nr. 18
Care and Maintenance • For best performance, don't touch the antennas unnecessarily • Keep all its parts and accessories out of young children's reach • Camera performances can be adversely affected by fingerprints or dirt on the lens surface. Avoid touching the lens surface with your fingers. • Should the lens become dirty, use a blower to blow off dirt and dust, or a soft, dry cloth to wipe off the lens. • Keep dry. Precipitation, humidity, and liquids, contain minerals that will corrode ele
Streszczenie treści zawartej na stronie nr. 19
Specifications Camera Frequency 2.4~2.4835 GHz Range 300 feet (100 meters) clear line of sight Antennas Directional circular-polarized antenna Channel 4 selectable channels AV mod/demod. method FM Image Sensor 1/4” CMOS image sensor Lens f3.6mm, F2.0 Dimension 10 x 9 x 15 cm (3.9 x 3.5 x 5.9 in) Weight 300g (10.6 ounces) without batteries Operating remperature 10°C~50°C (14° F~122° F) Monitor Frequency 2.4~2.4835 GHz Range 300 feet (100 meters) clear line of sight Antennas Directional circular-p
Streszczenie treści zawartej na stronie nr. 20
Sommaire Illustrations ................................................................................................................................................... 2 Configuration de la Caméra ....................................................................................................................... 6 Configuration du moniteur .......................................................................................................... 8 Configuration des autres Applications .....
