Instrukcja obsługi Harbor Freight Tools 47706

Streszczenie treści zawartej na stronie nr. 1

®
3/8” AIR RATCHET
WRENCH
Model 47706
ASSEMBLY and OPERATING
INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright c 2002 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353

Streszczenie treści zawartej na stronie nr. 2

Specifications Drive Size 3/8” Maximum RPM’s 110 RPM’s @90 PSI Torque Clockwise 48 Foot Pounds Torque Counterclockwise 50 Foot Pounds Air Inlet 1/4” - 18 NPT Female Recommended Air Pressure 90 PSI Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and i

Streszczenie treści zawartej na stronie nr. 3

8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. 9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords and air hoses periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times. 10. Disconnect air supply. Disconnect a

Streszczenie treści zawartej na stronie nr. 4

Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking, check to make sure the parts listed on page 6 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of

Streszczenie treści zawartej na stronie nr. 5

Operation (continued) Note: Turn off your air compressor and disconnect the air hose when you are changing sockets. After you attach the socket, attach the air hose and turn the air compressor on. 5. Select the appropriate size 3/8” socket for your needs. 6. Attach the socket (not included) to the Anvil (#18). 7. Moving the Forward/Reverse Button (#38) in a counterclockwise direction toward the “F” will tighten, and moving the Forward/Reverse Button (#38) clockwise toward the “R” will loose

Streszczenie treści zawartej na stronie nr. 6

Parts List Part No. Description Qty. Part No. Description Qty. 1 Housing 1 22 Drive Bushing 1 2 Air Inlet 1 23 Rachet Yoke 1 4 Throttle Lever 1 24 Cylinder 1 5 Pin 1 25 Rotor 1 6 Valve Stem 1 26 Rotor Blade 4 7 0-ring 1 27 Front Plate 1 8 Spring 1 28 Bearing 1 9 Valve Plug 1 29 End Plate 1 10 Washer 1 30 Bearing 1 11 0-ring 1 31 Pin 1 12 Thread Ring Gear 1 32 Washer 1 13 Cap 1 34 Spring 1 14 Gear 3 35 Lock Pin 1 15 Pin 3 36 R

Streszczenie treści zawartej na stronie nr. 7

Assembly Drawing Page 7 REV 06/06 SKU 47706 43 Actuation Pin