Instrukcja obsługi Hobo International U10-003

Streszczenie treści zawartej na stronie nr. 1

®
HOBO U10 Temp/RH Data Logger (Part # U10-003)
Inside this package: Thank you for purchasing a HOBO data logger. With
proper care, it will give you years of accurate and reliable
• HOBO U10 Temp/RH
measurements.
Logger
The HOBO U10-003 is a two-channel
• Mounting kit with magnet, hook-
Temperature/Relative Humidity Data Logger with 10-bit
and-loop tape, and 3/8” double-
resolution and capacity for 52,000 measurements. The
sided tape.
logger uses a direct USB interface for launching a

Streszczenie treści zawartej na stronie nr. 2

HOBO U10 Temp/RH Data Logger Note! Static electricity may cause the logger to stop logging. To avoid Logger operation electrostatic discharge, transport the logger in an anti-static bag, and ground A light (LED) on the side of the logger confirms yourself by touching an unpainted metal surface before handling the logger. logger operation. Light For more information about electrostatic discharge, visit The following table explains when the logger http://www.onsetcomp.com/support/support.