Instrukcja obsługi Chief Manufacturing FDP Series

Streszczenie treści zawartej na stronie nr. 1

INSTALLATION INSTRUCTIONS
FDP SERIES
SMALL FLAT PANEL DISPLAY
DUAL SCREEN POLE MOUNT
Exclusive Q2™ Mounting System
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.

Figure 1

(2) FDP Pole-Mounting Bracket Half (2) ¼” Flat Washer
(2) ¼-20 X 4.25” Hex Bolt (8) 10-24 X 1.00 Thread Forming Screw
(8) ½” X ½” Nylon Spacer

BEFORE PROCEEDING, READ INSTALLATION INSTRU

Streszczenie treści zawartej na stronie nr. 2

Pole-Mounting Bracket Assembly and Installation: 1. Assemble two pole-mounting bracket halves as shown in Figure 3 and secure using two ¼-20 X 4.25” hex bolts and two ¼” flat washers. 2. For vertical pole mounting, install the pole-mounting bracket on 1 ½” to 2” OD pipe/pole and secure using 7/16” hex drives (see Figure 4). 3. For horizontal pole mounting; remove eight tilt adjustment screws, reposition the tilt bracket as shown in Figure 5, and insert nylon spacers. Secure using 10-24 x