Streszczenie treści zawartej na stronie nr. 1
HOME AUTOMATION, INC.
Owner's Manual
Document Number 20R00-50 Rev. 2.11
January, 2006
Streszczenie treści zawartej na stronie nr. 2
Copyright © 2001-2006 Home Automation, Inc. All Rights Reserved
Streszczenie treści zawartej na stronie nr. 3
Contents INTRODUCTION........................................................................................................................................... 1 Underwriter's Laboratories (UL) Listing .........................................................................................................................................1 OVERALL DESCRIPTION.......................................................................................................................... 2 Console Op
Streszczenie treści zawartej na stronie nr. 4
CONTROL .................................................................................................................................................... 16 Control Commands ........................................................................................................................................................................16 About UPB.............................................................................................................................................
Streszczenie treści zawartej na stronie nr. 5
Status..............................................................................................................................................................................................35 Configuring HLC Devices ........................................................................................................................................................35 Configuring HLC Devices using an Omni Console...........................................................................
Streszczenie treści zawartej na stronie nr. 6
SETUP............................................................................................................................................................ 52 Configuration and Advanced Control Programming (ACP)..........................................................................................................52 Set Up Codes................................................................................................................................................................
Streszczenie treści zawartej na stronie nr. 7
Set Up Arming...............................................................................................................................................................................71 Entry Delay...............................................................................................................................................................................71 Exit Delay ...........................................................................................................
Streszczenie treści zawartej na stronie nr. 8
Streszczenie treści zawartej na stronie nr. 9
INTRODUCTION Thank you for purchasing your new Omni IIe automation system. You are about to enjoy a new feeling of security, comfort, convenience, and control. Omni IIe coordinates lighting, heating and air, security, scenes, and messages based on your lifestyle and schedule. Please take a few moments to become familiar with all of the features of your system by reviewing this manual. Please keep this manual on file for future reference. It is recommended that you also review th
Streszczenie treści zawartej na stronie nr. 10
OVERALL DESCRIPTION Console Operation The console is designed with everything that is necessary for you to program and operate your Omni IIe control and security system. Because we feel that it is very important for you to feel comfortable with the operation of your Omni IIe, we recommend that you start by becoming familiar with your console. The OFF (1), DAY (2), NIGHT (3), and AWAY (4) keys are called shortcut keys. This means that you may press these keys to go directly to that
Streszczenie treści zawartej na stronie nr. 11
6- UP ARROW The Up Arrow key is used to scroll through menus and lists. The Up Arrow is used to scroll back through a list (for example, if you have already used the down arrow to scroll to an item, the Up Arrow will bring you back to a previous item). 7- CONSOLE LED The Console LED is used to indicate whether the security system is currently armed or disarmed. If armed in any security mode, the LED is set to red. If the system is disarmed, the LED is set to green. The LED flashes
Streszczenie treści zawartej na stronie nr. 12
When using the arrow keys to scroll through lists of areas, buttons, codes, temperature zones, units, or zones, only the named items are displayed. If no text description has been given to an item, it will be skipped over when scrolling through that list. You can still enter any item number to access it directly, and then scroll up and down among the named items. To look at another specific item, simply enter the item number followed by the Down Arrow key. In some cases, the keypad key
Streszczenie treści zawartej na stronie nr. 13
Confirmation Beep When you have successfully completed a function, such as entering a program or changing a setup item, the console will beep once. Cancel If you are ever unsure and wish to return to the top-level display, press the ' * ' key. You may have to press it more than once, depending on how far into the function (menu) you are. Each time you cancel out of an operation, the console will beep once to indicate that you have canceled. The ' * ' key can also be used if you
Streszczenie treści zawartej na stronie nr. 14
SECURITY SYSTEM OPERATION Disarming the Security System and Silencing Alarms Before going any further, you should know how to disarm your security system in the event that the alarm sounds. Turning the system OFF disarms the burglar alarm, resets the fire and emergency alarms, and silences all sirens and sounders. 1 1 1 1 Press the OFF key. OFF Now enter your four digit Code. That's all there is to it. Watch the display. The top line will read "DISARM" - The bottom li
Streszczenie treści zawartej na stronie nr. 15
2 = NIGHT The NIGHT mode is used when you are asleep and everyone in your household is at home. In the Night mode, your doors, windows, and non-sleeping area (i.e. downstairs) motion detectors are armed. In the Night mode, there is no entry delay. The alarm system sounder will be activated immediately if any door, window, or non-sleeping area (motion detector) is tripped. 3 = AWAY Use the AWAY mode when you leave your house and no one is home. All doors, windows, and motion detec
Streszczenie treści zawartej na stronie nr. 16
Quick Arm For extra convenience, the Omni IIe can be armed by simply pressing the DAY, NIGHT, or AWAY button twice, eliminating the need to enter the code. To quick arm the system in the Away mode, from the top-level display, press . AWAY AWAY The quick arm feature only works if the alarm system is in the Off mode, and if no alarms are sounding. This feature is disabled when the system is shipped. If desired, it can be enabled or disabled at any time - See Set Up Arming, Enabl
Streszczenie treści zawartej na stronie nr. 17
#=GOTO To Bypass or Restore a zone in another area, you must first "go to" that area by selecting #=GOTO. AREA: ENTER AREA: At this point you may enter the area number followed by the ' # ' key, or use the down arrow key to scroll to the next area - See Area Arming for additional information. What To Do When You Come Home Entry through a door: If you enter your home while the system is armed in the Day or Away modes, using your normal entry door: • Console beeper c
Streszczenie treści zawartej na stronie nr. 18
For more information on the digital and voice dialer - See Digital Dialer and Voice Dialer. • The system continues to sound all alarms and flash the flashing light for 1-30 minutes after the alarm is activated. • After a 1-30 minute period, the sounder is turned off, and the alarm system resets itself. The console beeper stays on. If a zone is tripped after a reset, the sounder will again be activated, and the dialer will again dial out. At any time, the alarm system can be turned of
Streszczenie treści zawartej na stronie nr. 19
Police Emergency When the 1 key and the 3 keys are pressed simultaneously, the Police Emergency alarm is activated. This alarm operates exactly the same as described for Burglar Alarm Activated except: • The console display indicates: "BURGLARY! - POLICE EMERG TRIPPED". • The interior sounder and the outdoor siren are activated immediately. There is no outside siren delay. Fire Emergency When the 4 key and the 6 key is pressed simultaneously, the Fire Emergency alarm is activ
Streszczenie treści zawartej na stronie nr. 20
Trouble Indications The Omni IIe constantly monitors the alarm zones and several internal matters and will alert you if it detects trouble. The particular trouble is indicated on the bottom line of the display and a trouble signal is given by beeping the console beeper continuously, 2 beeps per second. When any trouble condition occurs, the console will beep twice per second and continue to beep until the ' * ' key (cancel) is pressed to acknowledge the trouble. The console will say
