Instrukcja obsługi Human Touch iJoy-245

Streszczenie treści zawartej na stronie nr. 1

Aug 20, 2009

X1103
REPLACING THE MASSAGE MECHANISM
HT-2580/iJoy-2580/iJoy-245/iJoy-250
®
To ensure that Human Touch products are repaired in a manner that is fully consistent with the practices used during the manufacturing process, Human Touch requires that all
SERVICE LEVEL: 2
product repairs are performed using only factory-new parts and in accordance with these product repair instructions.
Tools Required: Phillips-head screwdriver (preferably power), flat-head screwdriver, paper clip, n

Streszczenie treści zawartej na stronie nr. 2

INSTALLING THE NEW MASSAGE MECHANISM 1. Place the new massage mechanism into position, then replace the ten screws/washers to secure it (Fig.5). IMPORTANT: The lock washer goes on the screw before the flat washer. 2. Reconnect the four massage mechanism connectors to the corresponding connectors in the backrest, then secure the connectors using new zip ties. (Fig.6). 3. Insert the ground wire screw through the ring at the end of the yellow ground wire, insert the screw into the corresponding h