Instrukcja obsługi Bontrager 243705

Streszczenie treści zawartej na stronie nr. 1

Part Number 243705
BONTRAGER SEATPOST OWNER'S MANUAL
Figure 1- Bontrager seatpost
Table of contents
Read this manual before you ride.................................................................2
Inspect your seatpost regularly ....................................................................2
Installation instructions................................................................................3
Bontrager warranty..........................................................................

Streszczenie treści zawartej na stronie nr. 2

READ THIS MANUAL BEFORE YOU RIDE Please read this instruction manual thoroughly before using your new seatpost; it contains important safety and maintenance information. If you do not understand the information in this manual, or you have a question about your seatpost that this manual does not cover, consult your Bontrager dealer. If you have a question or problem that your Bontrager dealer can’t handle, contact us at: Bontrager Components (800) 369-8735 Attn: Customer Service http://www.b

Streszczenie treści zawartej na stronie nr. 3

Installation instructions Generally, it is easier to remove the saddle with the seatpost held firmly in the bike frame. However, the old seatpost may be corroded slightly, making removal or the seatpost difficult without the seat attached for leverage and grip. These instructions explain how to remove a seatpost that may be slightly corroded. To remove an old seatpost 1. Loosen the seatpost binder bolt. 2. Twist the saddle to loosen and partially remove the seatpost from the frame. 3. Re-tig

Streszczenie treści zawartej na stronie nr. 4

To adjust the saddle tilt 1. Loosen the saddle clamp bolt several turns. 2. While tilting the saddle, apply pressure to the top of the saddle directly above the saddle clamp. Pressure on the saddle helps release the compression wedges. 3. Tilt the saddle to the desired angle. This This line line 4. Follow the Inspection procedures to re-tighten the saddle clamp bolt. must must be be hidden hidden To adjust the saddle height inside inside the the 1. Loosen the seatpost binder bolt, or quick-