Streszczenie treści zawartej na stronie nr. 1
GA-5YXS1-RH/GA-5YXS-RH
®
Xeon Processor Motherboard
USER’S MANUAL
®
Xeon Processor Motherboard
Rev. 1001
* The WEEE marking on the product indicates this product must not be disposed of with
user's other household waste and must be handed over to a designated collection point
for the recycling of waste electrical and electronic equipment!!
* The WEEE marking applies only in European Union's member states.
Streszczenie treści zawartej na stronie nr. 2
GA-5YXS1-RH/GA-5YXS-RH Motherboard Table of Content Item Checklist ........................................................................................ 3 Chapter 1 Introduction ............................................................................ 4 1-1 Considerations Prior to Installation ............................................................................ 4 1-2 Features Summary .................................................................................................
Streszczenie treści zawartej na stronie nr. 3
Introduction Item Checklist The GA-5YXS-RH motherboard (For GA-5YXS-RH) The GA-5YXS1-RH motherboard (For GA-5YXS1-RH) Serial ATA cable x 4 IDE (ATA133 ) cable x 1 / Floppy cable x 1 I/O Shield Kit CD for motherboard driver & utility GA-5YXS-RH/GA-5YXS1-RH Quick Reference Guide * The items listed above are for reference only, and are subject to change without notice. 3
Streszczenie treści zawartej na stronie nr. 4
GA-5YXS1-RH/GA-5YXS-RH Motherboard Chapter 1 Introduction 1-1 Considerations Prior to Installation Preparing Your Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instructions below: 1. Please turn off the computer and unplug its power cord. 2. When handling the motherboard, avoid touching any metal leads or connectors. 3. It is best to wea
Streszczenie treści zawartej na stronie nr. 5
Introduction 1-2 Features Summary Form Factor 12” x 9.6” ATX form factor, 6 layers PCB. ® ® CPU Supports single Intel Xeon processor ® Intel Xeon Dual-Core/Quad-Core processor in LGA 775 socket Supports 800/1066/1333MHz FSB ® Chipset Intel 3200 Chipset ® Intel ICH9R Memory 4 x DDR2 DIMM sockets Supports up to 8GB 667/800 memory Dual Channel memory bus ECC Unbuffered DDR2 667/800 Supports 1GB, 2GB memory I/O Control ITE IT8718F-S Super I/O Expansion Slots Supports 2 PCI slots 3
Streszczenie treści zawartej na stronie nr. 6
GA-5YXS1-RH/GA-5YXS-RH Motherboard T emperature, and /System Temperature values viewing CPU/System Fan Revolution Detect CPU shutdown when overheat ® On-Board LAN Intel 82566DC & 82573LGbE controllers (GA-5YXS1-RH) ® Intel 82566DC & 82573VGbE controller (GA-5YXS-RH) Supports dual Gigabit LAN ports Supports WOL BIOS Phoenix BIOS on 8Mb flash ROM Support console redirection Additional Features PS/2 Mouse wake up from S1 under Windows Operating System External Modem wake up Supports S
Streszczenie treści zawartej na stronie nr. 7
Introduction 1-3 GA-5YXS1-RH/GA-5YXS-RH Motherboard Components 1. CPU 22. PCI_1 slot(32bit/33MHz) 2. Intel 3200 23. PCI-E x8 slot 3. Intel ICH9R 24. PCI-E x8 Slot (x1 bandwidth) 4. ITE IT8718F-S 25. PCI-E x8 Slot (x1 bandwidth) 5. XGI Volari Z9s 26. IPMI BMC Module solt (optional) 6. VGA Memory 27. DIMM1 7. Intel 82566DC GbE 28. DIMM2 8. Intel 82573L GbE (GA-5YXS1-RH) 29. DIMM3 8. Intel 82573V GbE (GA-5YXS-RH) 30. DIMM4 9. IDE cable connector 31. PS/2 ports 10. Floppy cable connector 32. VGA po
Streszczenie treści zawartej na stronie nr. 8
GA-5YXS1-RH/GA-5YXS-RH Motherboard 40 41 31 30 29 32 28 27 33 34 1 2 35 39 36 38 8 37 43 25 7 13 24 3 14 4 6 23 15 16 5 22 17 21 26 10 18 19 42 11 12 9 20 8 English
Streszczenie treści zawartej na stronie nr. 9
Hardware Installation Process Chapter 2 Hardware Installation Process 2-1 Installing Processor and CPU Haet Sink Before installing the processor and cooling fan, adhere to the following cautions: 1. The processor will overheat without the heatsink and/or fan, resulting in permanent irreparable damage. 2. Never force the processor into the socket. 3. Apply thermal grease on the processor before placing cooling fan. 4. Please make sure the CPU type is supported by the motherboard. 5. If you do no
Streszczenie treści zawartej na stronie nr. 10
GA-5YXS1-RH/GA-5YXS-RH Motherboard 2-1-2: Installing Cooling Fan Step 1 Attach the heat sink clip to the processor socket. Step 2 Place the cooling fan on the heat sink. Step 3 Secure the cooing fan with screws. Step 4 Connect processor fan can cable to the processor fanconnector 10 English
Streszczenie treści zawartej na stronie nr. 11
Hardware Installation Process 2-2 Install Memory Modules Before installing the memory modules, please comply with the following conditions: 1. Please make sure that the memory used is supported by the motherboard. It is recommended that memory of similar capacity, specifications and brand be used. 2. Before installing or removing memory modules, please make sure that the computer power is switched off to prevent hardware damage. 3. Memory modules have a foolproof insertion design. A memory mod
Streszczenie treści zawartej na stronie nr. 12
GA-5YXS1-RH/GA-5YXS-RH Motherboard Installation Steps: 1. Unlock a DIMM socket by pressing the retaining clips outwards.Aling a DIMM on the socket such that the notch on the DIMM exactly match the notch in the socket. 2. Firmly insert the DIMMinto the socket until the retaining clips snap back in place. NOTE!! We recommened you to populate the same device size on each socket and the same DIMM size. 4. Reverse the installation steps if you want to remove the DIMM module. 12 English
Streszczenie treści zawartej na stronie nr. 13
Hardware Installation Process 2-3 Connect ribbon cables, cabinet wires, and power supply 2-3-1 : I/O Back Panel Introduction 13
Streszczenie treści zawartej na stronie nr. 14
GA-5YXS1-RH/GA-5YXS-RH Motherboard PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). Serial Port This connector supports 1 standard COM port, device like modem can be connected to Serial port. VGA Port Connect the monitor cable to this port. USB Ports Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard, mouse, scanner, zip
Streszczenie treści zawartej na stronie nr. 15
Connector Introduction 2-4 Connectors Introduction & Jumper Setting 2 1 17 16 15 18 5 6 21 7 8 9 20 10 4 14 3 19 11 12 13 1. ATX2 12. USB3 (USB cable connector) 2. ATX1 13. HDDBPB1 3. IDE1 (IDE cable connector) 14. IPMB1 4. FDC1 (Floppy cable connector) 15. FAN1 (CPU fan cable connector) 5. SATA_1 (SATA cable connector) 16. FAN2 (System fan cable connector) 6. SATA_2 (SATA cable connector) 17. FAN3 (System fan cable connector) 7. SATA_3 (SATA cable connector) 18. BAT1 (Battery) 8. SATA_4 (SATA
Streszczenie treści zawartej na stronie nr. 16
GA-5YXS1-RH/GA-5YXS-RH Motherboard 1/2) ATX2/1 (24-pin/4-pin ATX power connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly. The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power c
Streszczenie treści zawartej na stronie nr. 17
Connector Introduction 3 ) IDE1 (IDE cable connector) An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master and the other as Slave (for information on settings, please refer to the instructions located on the IDE device). Before attaching the IDE cable, please t
Streszczenie treści zawartej na stronie nr. 18
GA-5YXS1-RH/GA-5YXS-RH Motherboard 5/ 6/ 7/ 89/10 ) SATA_ 1~6 (Serial ATA cable connectors) SATA 3Gb/s can provide up to 300 MB/s transfer rate. Please refer to the BIOS setting for the SATA 3Gb/s and install the proper driver in order to work properly. Pin No. Definition 7 1 GND 2TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND 1 11/ 12 ) USB2/USB3 (USB cable connectors) Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you connect the front USB cable, incorre
Streszczenie treści zawartej na stronie nr. 19
Connector Introduction 13 ) HDDBPB1 (SMBUS connector for power supplyr) 1 Pin No. Definition 1 SCL 2 SDA 3 DETECT 4 HDD LED 5 INT 6 GND 14 ) IPMB1 (IPMB connector) 1 Pin No. Definition 1 SCL 2 GND 3 SDA 19
Streszczenie treści zawartej na stronie nr. 20
GA-5YXS1-RH/GA-5YXS-RH Motherboard 15/ 16/ 17 ) FAN1 (CPU fan / System fan cable connectors) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(CPU_FAN) power connector and possesses a foolproof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indicates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND). Remember to connect the CPU/system fan cable
