Streszczenie treści zawartej na stronie nr. 1
LevelOne
User Manual
WBR-6001
N_Max Wireless Broadband Router
Ver. 1.0.0-0801
i
Streszczenie treści zawartej na stronie nr. 2
Safety FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are desi
Streszczenie treści zawartej na stronie nr. 3
Table of Content TABLE OF CONTENT.................................................................................................................V 1. INTRODUCTION....................................................................................................................1 USER MANUAL OVERVIEW............................................................................................................1 2. UNPACKING AND SETUP.............................................................
Streszczenie treści zawartej na stronie nr. 4
URL Blocking .......................................................................................................................38 MAC Address Control ..........................................................................................................40 Miscellaneous Items.............................................................................................................43 ADVANCED SETTINGS ....................................................................................
Streszczenie treści zawartej na stronie nr. 5
1. Introduction Congratulations on your purchase of LevelOne N_Max Wireless Broadband Router. This product is specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution for Internet surfing, and is easy to configure and operate even for non-technical users. Instructions for installing and configuring this product can be found in this manual. Before you install and use this product, please read the manual carefully for fully exploiting the functions
Streszczenie treści zawartej na stronie nr. 6
Streszczenie treści zawartej na stronie nr. 7
2. Unpacking and Setup This chapter provides the package contents and setup information for the N_Max Wireless Broadband Router. Features Extended and high-speed wireless connectivity with wireless N technology Advanced QoS Services for Intelligent Internet Backward compliant with IEEE802.11g and 11b standards Operates on the 2.4GHz frequency band Stay Protected with Advanced Network Security WEP and WPA/WPA2-PSK encryption supported along with Wi-Fi Protected Setup Integr
Streszczenie treści zawartej na stronie nr. 8
Streszczenie treści zawartej na stronie nr. 9
3. Hardware Installation Product Layout – Front View 1) Reset Press the Reset button to reboot device or restores factory default setting. 2) Status A blinking light indicates the device is ready 3) WAN A solid light indicates the WAN port is connected. 4) WLAN A solid light indicates the Wireless segment is ready. LED blinks during wireless data transmission. 5) LAN LEDs A solid light indicates to an Ethernet enable computer on ports 1~4. LED blinks during data transmi
Streszczenie treści zawartej na stronie nr. 10
Product Layout – Rear View 1) Power Jack Receptor for the supplied power adapter 2) LAN Ports (1~4) Connect Ethernet devices such as computers, switches or hubs. 3) WAN Port The WAN port is the connection for the Ethernet cable to the Cable or DSL Modem. 4) Antenna Detachable antenna allows users to change antenna if necessary. Hardware installation steps Decide where to place your Wireless Broadband Router You can place your Wireless Broadband Router on a desk or other f
Streszczenie treści zawartej na stronie nr. 11
3. Setup WAN connection Prepare an Ethernet cable for connecting this product to your cable/xDSL modem or Ethernet backbone. 4. Power on Connecting the power cord to power inlet and turning the power switch on, this product will automatically enter the self-test phase. When it is in the self-test phase, the Status indicator will be lighted ON for about 10 seconds, and then it will be flashed 3 times to indicate that the self-test operation has finished. Finally, the Status ind
Streszczenie treści zawartej na stronie nr. 12
Network Check 1. Please make sure your PC can get IP address automatically so the WBR-6001 can communicate with your PC during configuration. • Select “Control Panel” > “Network Connections”. • Right click the “Local Area Connection” and choose “Properties”. • Select the TCP/IP protocol for your network card. • Click on the Properties button. You should then see the following screen and make sure you have selected “Obtain IP address automatically” 2. Reboot computer to make sure yo
Streszczenie treści zawartej na stronie nr. 13
Default Settings IP Address 192.168.0.1 Password password Wireless Mode Enable SSID WBR-6001 Security None Please enter the default system password in lowercase only.
Streszczenie treści zawartej na stronie nr. 14
4. Configuring Wireless Router LED Indicator for N_Max Wireless Router LED Function Color Statu Description s System Status flashed once per second to indicate system Status Green Blinking status is alive. WAN port WAN Green On The WAN port is linked. activity Blinking The WAN port is sending or receiving data. WLAN Wireless Green activity Blinking Sending or receiving data via wireless Link. An active station is connected to the corresponding Li
Streszczenie treści zawartej na stronie nr. 15
Login to Configure from Wizard Activate your browser, and disable the proxy or add the IP address of this product into the exceptions. Then, type this product’s IP address in the Location (for Netscape) or Address (for IE) field and press ENTER. For example: http://192.168.0.1 After the connection is established, you will see the web user interface of this product. There are two appearances of web user interface: for general users and for system administrator. To log in as an administ
Streszczenie treści zawartej na stronie nr. 16
Setup Wizard will guide you through a basic configuration procedure step by step. Press ”Next ” Once the user finishes those steps and the router screen displayed as below. It means that the Internet connection is now established. 8
Streszczenie treści zawartej na stronie nr. 17
Streszczenie treści zawartej na stronie nr. 18
Basic Setting Please Select “Advanced Setup” to Setup Primary Setup – WAN Type, Virtual Computers 10
Streszczenie treści zawartej na stronie nr. 19
Press “Change”
Streszczenie treści zawartej na stronie nr. 20
This option is primary to enable this product to work properly. The setting items and the web appearance depend on the WAN type. Choose correct WAN type before you start. 1. LAN IP Address: the local IP address of this device. The computers on your network must use the LAN IP address of your product as their Default Gateway. You can change it if necessary. 2. WAN Type: WAN connection type of your ISP. You can click Change button to choose a correct one from the following four option
