Instrukcja obsługi Ruckus Wireless MF2900

Streszczenie treści zawartej na stronie nr. 1

Ruckus MF2900 Router/Access Point Quick Setup Guide
Connect and configure your MF2900 AP
The following steps will guide you through setting up and
gaining administrative access to your Ruckus MF2900 AP.
1. Remove the Ruckus MF2900 AP from the packaging
and place it next to your computer.
2. Connect the AC Power Supply to the MF2900 AP and
plug the other end into a power outlet or to a surge
protector that is plugged into a power outlet.
3. Connect the CAT5 Ethernet cable to the Ethernet port

Streszczenie treści zawartej na stronie nr. 2

Ruckus MF2900 Quick Setup Guide Check the LED status lights to verify Find the Ruckus MF2900 AP over correct operation your wireless network 1. Make sure you are using the power adapter sup- plied by Ruckus Wireless, Inc. You should now be able to find the SSID of your MF2900 AP over your wireless network. If you have 2. Make sure the Power LED is lit. If it is not lit, make changed the default Network Name (SSID), or the sure that the power cord is properly connected to security settin