Streszczenie treści zawartej na stronie nr. 1
Card Printer
Electronic
CX-7000 Series
Manual
Thank you for purchasing this product.
Please read through this “Electronic Manual”
carefully in advance to ensure proper use of the
product. Also, to make sure that the product is
used safely, please read through the “Safety
Precautions” in the “READ ME FIRST” booklet.
Please store the manuals properly after reading
so that they can be referred to whenever
LST1006-002A
necessary.
Streszczenie treści zawartej na stronie nr. 2
Contents Before Use About this Manual ................................................................ 3 Precautions .......................................................................... 3 Disclaimer ............................................................................ 7 Name and Functions of Parts .............................................. 7 Specifications ..................................................................... 10 Accessories/Products Sold Separately ..............
Streszczenie treści zawartej na stronie nr. 3
Before Use About this Manual Precautions Contents of this Manual Safety Precautions v v The copyright of this manual belongs to our company. Reprint and Please read through all the following items before using the duplicate of this manual in part or full without the prior consent of our printer. company is strictly prohibited. v Product names of other companies described in the manual are the Graphical Symbols trademarks or registered trademarks of the respective companies. v A number of graphic
Streszczenie treści zawartej na stronie nr. 4
Before Use Warnings . . . 4
Streszczenie treści zawartej na stronie nr. 5
Before Use Caution . . 5
Streszczenie treści zawartej na stronie nr. 6
Before Use Precautions During Use Precautions on Retransfer Film/Ink Ribbon v v Please read through all the following items before using the printer. Put on the supplied gloves when handling the retransfer film/ink ribbon. Direct contact of your hand with the printing surface may result in printing errors. Printer Installation m When retransfer film/ink ribbon is dismantled v When the printer is not in use, it is recommended that you turn off v Winding misalignment may occur. If an improperly wo
Streszczenie treści zawartej na stronie nr. 7
Before Use Disclaimer Name and Functions of Parts Internal Mechanism Diagram . A Card feeder unit v This is the roller for feeding cards. B Bend remedy unit (optional) v Corrects bending of the card after retransfer. C Retransfer heating roller v Transfers images printed on the retransfer film to the card. D Non-contact IC encoder (optional) v Writes data to a non-contact IC card. E Contact section of contact IC encoder (optional) v Writes data to a contact IC card. F Magnetic encoder (optional)
Streszczenie treści zawartej na stronie nr. 8
Before Use Front Right . A NG card outlet . v If a card is left inside the printer when the power is turned on or A Sliding knob reset, the card will be automatically discharged. v v Opens/closes the printer door. Cards in the printer are discharged when an error occurs in the v magnetic stripe card or IC card. Slide it upward, and pull toward you to open the printer door. B Air suction fan opening B Operation buttons v v Air inlet of the internal cooling fan. For selecting and confirming inform
Streszczenie treści zawartej na stronie nr. 9
Before Use When Printer Door is Open Retransfer Film Cassette . A Card feed roller shaft v When a card jam occurs, attach a jog dial to turn the card feed roller. . B Card turn over unit shaft A Bobbin holder (black) v v When a card jam occurs, attach a jog dial to turn the card turn For securing the take-up side of the retransfer film. over unit. B Guide shaft C Cleaning unit v Provides guide to the position for installing the cassette. v Removes dust or dirt attached to the card. C Shafts D Cl
Streszczenie treści zawartej na stronie nr. 10
Before Use Specifications Accessories/Products Sold Separately Main Specifications Accessories Please check to ensure that the printer accessories are in place Item Description when unpacking the product package. Recording system Dye sublimation retransfer v CD-ROM x 1 v Instruction Manual x 1 Paper feed mode Automatic v “READ ME FIRST”(LST1004) x 1 Recording density 300 dpi v Power Cord (2 m) x 2 v Reproduction 256 levels each for Y, M and C Cleaning Card x 1 gradation 2 levels for Resin K v Ca
Streszczenie treści zawartej na stronie nr. 11
Before Use Options Options v Bend remedy unit Device for correcting card bend after printing. v Magnetic encoder Device for writing data to a magnetic stripe card. It can only be installed on a double-sided printer. v Contact IC encoder Device for writing data to a contact IC card. v Non-contact IC encoder Device for writing data to a non-contact IC card. 11
Streszczenie treści zawartej na stronie nr. 12
Operating the Printer After ensuring that a [Ready] message appears on the LCD panel of 4 the printer, start printing Printing a Card Cautions: v If you see an [Initializing..] or [Preheating..] message on the LCD panel of the printer, this means the printer is not ready yet. Printing cannot be performed until a [Ready] massage appears. v Printing the card on the side with the magnetic stripe may cause printing errors or damage to the card’s functions. If you want to do so, please consult our au
Streszczenie treści zawartej na stronie nr. 13
Operating the Printer Operation Panel Icon Displays on the Operation Panel m USB connection Name and Functions of Parts v IP address established Printer information can be viewed through the network. However, A printing is performed through USB connection. Ready Total *** Reset Menu B C . v IP address not established . A Operation panel v Displays the settings, operating status, and error messages. B Status icon/operation button display v Displays the status icon and function of the operation bu
Streszczenie treści zawartej na stronie nr. 14
Operating the Printer m Downloading Operation Panel Operation Display Downloading.. Background color Changes according to the printer’s operating status. . v During startup Bright green m Magnetic encoding in progress v Under normal circumstances Sky blue MG Encoding.. v During initialization using K, during test printing using the operation panel, cleaning, downloading and during security lock . setting using the operation panel Light purple m IC encoding v During error Red IC Encoding.. m Star
Streszczenie treści zawartej na stronie nr. 15
Operating the Printer Setting Mode Print v Displays the printing settings. v Settings can be viewed on the printer’s operation panel. v Settings can be changed on the status monitor of the computer. Settings "Setting Using the Operation Panel" ( A page 22) v YMC Level: -3, -2, -1, 0, 1, 2, 3 "Sequence of Setting Modes" ( A page 17) For setting the YMC (color) density level. "Factory Settings" (A page 19) Selecting a larger value increases the density level. v Black Level: -3, -2, -1, 0, 1, 2, 3
Streszczenie treści zawartej na stronie nr. 16
Operating the Printer Bend Remedy Option v v Displays the bend remedy mode settings. Displays the optional settings. Settings Settings v v Temp Level: -5, -4, -3, -2, -1, 0, Off MG: None, ISO For setting the bend remedy heating roller temperature. Displays the availability of a magnetic encoder or the type of Selecting a larger value increases the temperature. magnetic encoder used. If the printer is not reset after changing the temperature setting, v IC Antenna: None, Installed temperature is a
Streszczenie treści zawartej na stronie nr. 17
Operating the Printer Sequence of Setting Modes v Settings can be viewed on the printer’s operation panel. v Settings can be changed on the status monitor of the computer. "Setting mode" (A page 15) 1 Press I . v Enters the setting mode. . . 2 Press J . v Pressing it each time displays the next setting item. v Pressing G displays the setting item on the next lower level. . v Pressing F enters the settings change mode. v Pressing B confirms or executes the setting. v Pressing H displays the setti
Streszczenie treści zawartej na stronie nr. 18
Operating the Printer . . . . . . . 18
Streszczenie treści zawartej na stronie nr. 19
Operating the Printer m Network Factory Settings Item Factory Settings m Media Printer Name PRINTER01 Item Factory Settings Host IF LAN Ink Type - IPv4 DHCP On Film Type 1000 Setting IP Address 192.168.0.141 Card Thickness Standard Subnet Mask 255.255.255.0 m Print Gateway 192.168.0.1 Item Factory Settings Effective IP IP Address - YMC Level 0 IPv6 Adrs Config Auto Black Level 0 Setting IP Address None Black Mode Standard Prefix Len 64 UV Level 3 Gateway None PO Level 0 Effective IP IP Address 1
Streszczenie treści zawartej na stronie nr. 20
Operating the Printer 6 Press B Security Lock v The security lock function can be applied to the printer door and card hopper to prevent opening of the printer door as well as removal of cards. v The lock can be turned on/off using the status monitor on the computer. "Status monitor" (A page 117) . v By registering a security key number on the printer unit, you can turn v If this number is consistent with the number entered in [New key], off the security lock by entering the security key number
