Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
1 ! Fig. 1 Fig. 2 4 5 3 OPERATION TIMER 6 9 SWING = 7 0 Fig. 3 ~ 8 - Fig. 5 % Fig. 4 # @ $ ^ Fig. 6 ) SLEEP TIMER & _ ¶ CLOCK PM • MASTER SET SET FAN CLOCK TIMER RESET CONTROL TEMP. TIME CONTROL AM ON ª– * + OFF HM PM OFF ON SLEEP AUTO AUTO ¡ F START/STOP COOL HIGH ≠ LOW HIGH SWING AIR FLOW ( DRY MED º LOUVER DIRECTION FAN LOW QUIET ™ Ÿ £ ⁄ ¤ § ¢ Fig. 8 ACL ∞ OPEN Fig. 7
Streszczenie treści zawartej na stronie nr. 3
CONTENTS ADJUSTING THE DIRECTION OF SAFETY PRECAUTIONS .................................... En-1 AIR CIRCULATION ........................................... En-11 FEATURES AND FUNCTIONS ........................... En-4 SWING OPERATION ........................................ En-12 NAME OF PARTS ............................................... En-5 MANUAL AUTO OPERATION ......................... En-12 PREPARATION.................................................... En-6 CLEANING AND CARE ..........
Streszczenie treści zawartej na stronie nr. 4
PRECAUTIONS WARNING Do not stay in direct cooling airflow for long periods. ¶ Excessive direct exposure to chilled air could be bad for your health. ¶ Be especially careful when going to bed, and in rooms where infants, aged, or sick people are staying. Do not insert fingers or objects into the outlet port or intake grilles. ¶ A fan operates at high speed inside the unit, and personal injury could result. ¶ Be particularly careful regarding small children. In the event of a malfunction (burning
Streszczenie treści zawartej na stronie nr. 5
PRECAUTIONS CAUTION Turn off power source when not using the Always turn off power whenever cleaning unit for extended periods. the air conditioner or changing the air fil- ter. ¶ A fan operates at high speed inside the unit, and per- sonal injury could result. Take precautions to prevent infants from Check the condition of the installation for accidentally swallowing batteries. damage. ¶ After lengthy use, arrange for visit by authorized ser- vice personnel to check installation condition. Do n
Streszczenie treści zawartej na stronie nr. 6
FEATURES AND FUNCTIONS AUTOMATIC OPERATION REMOVABLE INTAKE GRILLE Merely press the START/STOP button, and the unit will be- The indoor unit's INTAKE GRILLE can be removed for easy gin automatic operation in either the Heating, Cooling, Dry, cleaning and maintenance. or Monitor modes as appropriate, in accordance with the thermostat setting and the actual temperature of the room. MILDEW-RESISTANT FILTER SLEEP TIMER The AIR FILTER has been treated to resist mildew growth, thus allowing cle
Streszczenie treści zawartej na stronie nr. 7
NAME OF PARTS Fig. 1 Indoor Unit Fig. 6 Remote Control Unit 1 Operating Control Panel (Fig. 2) & SLEEP button 2 MANUAL AUTO button * MASTER CONTROL button ( SET TEMP. /SET TIME button ( / ) 3 Remote Control Signal Receiver ) Signal Transmitter _ TIMER button 4 Indicator Lamps (Fig. 3) + FAN CONTROL button 5 OPERATION Indicator Lamp (red) ¡ START / STOP button 6 TIMER Indicator Lamp (green) ™ AIR FLOW DIRECTION button ÷ If the TIMER Indicator Lamp flashes when £ SWING LOUVER button the timer is o
Streszczenie treści zawartej na stronie nr. 8
PREPARATION CAUTION! Turn on the Power ÷ Take care to prevent infants from accidentally swallowing batteries. In the case of a direct line connection, turn on the circuit ÷ When not using the remote control unit for breaker. ON an extended period, remove the batteries to avoid possible leakage and damage to the unit. ÷ If leaking battery fluid comes in contact with your skin, eyes, or mouth, immediately Load Batteries (AAA x 2) wash with copious amounts of water, and consult your physician.
Streszczenie treści zawartej na stronie nr. 9
OPERATION To Select Mode Operation SLEEP TIMER Press the START/STOP button (Fig. 6 ¡). 1 The Indoor Unit’s OPERATION Indicator Lamp (red) (Fig.3 5) will light. The air conditioner will start operation. COOL Press the MASTER CONTROL button (Fig.6 *) to select 2 MASTER SET SET FAN the desired mode. CONTROL TEMP. TIME CONTROL Each time the button is pressed, the mode will change in the following order. AUTO COOL DRY FAN START/STOP About three seconds later, the entire display will reappear. Exam
Streszczenie treści zawartej na stronie nr. 10
OPERATION To Select Automatic Operation Press the MASTER CONTROL button to select AUTO. The operating mode “AUTO” will appear alone in the display. The transmit indica- AUTO tor will flash to indicate the command has been sent, and about three seconds later the entire display panel will reappear. MASTER SET SET FAN CONTROL TEMP. TIME CONTROL To Set the Thermostat Press the TEMPERATURE set button. LOW HIGH LOW HIGH LOW HIGH LOW HIGH LOW HIGH When set to When set to When set to When set to Whe
Streszczenie treści zawartej na stronie nr. 11
TIMER OPERATION Before using the timer function, be sure that the Remote Control Unit is set to the correct current time (See Page 6). To Use the ON timer or OFF timer Press the START/STOP button (Fig. 6 ¡). To Cancel the Timer 1 (if the unit is already operating, proceed to step 2). Use the TIMER button to select “TIMER The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) will light. RESET.” The air conditioner will return to normal operation. Press the TIMER button (Fig. 6 _) to sel
Streszczenie treści zawartej na stronie nr. 12
SLEEP TIMER OPERATION Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operation is stopped. To Use the SLEEP Timer While the air conditioner is operating or stopped, press the To Cancel the Timer: SLEEP button (Fig. 6 &). Use the TIMER button to select “TIMER The indoor unit’s OPERATION Indicator Lamp (red) (Fig 3. 5) lights and the TIMER RESET”. Indicator Lamp (green) (Fig 3. 6) light. The air conditioner will return to normal operation.
Streszczenie treści zawartej na stronie nr. 13
ADJUSTING THE DIRECTION OF AIR CIRCULATION Vertical (up-down) direction of airflow is adjusted by pressing the Remote Control Unit's AIR FLOW DIRECTION button. Horizontal (right-left) airflow direction is adjusted manually, by moving the Air Flow Direction Louvers. Whenever making horizontal airflow adjustments, start air conditioner operation and be sure that the vertical air direction louvers are stopped. Vertical Air Direction Adjustment Press the AIR FLOW DIRECTION button (Fig. 6 ™). Each
Streszczenie treści zawartej na stronie nr. 14
SWING OPERATION Begin air conditioner operation before performing this procedure. To Select SWING Operation Press the SWING LOUVER button (Fig.6£ ). The SWING Indicator Lamp (orange) (Fig. 3 7) will light. In this mode, the Air Flow Direction Louvers will swing automatically to direct the airflow both up and down. To Stop SWING Operation Press the SWING LOUVER button (Fig.6£ ) once again. The SWING Indicator Lamp (orange) (Fig. 3 7) will go out. Airflow direction will return to the setting b
Streszczenie treści zawartej na stronie nr. 15
CLEANING AND CARE Before cleaning the unit, be sure to stop the unit and disconnect the power. 1. Disconnect the power. 2. Turn off the electrical breaker. WARNING ¶ A fan operates at high speed inside the unit, and personal injury could result. When cleaning the air conditioner, turn off the electrical Cleaning the Indoor Unit breaker. Clean the indoor unit by wiping with a cloth dipped in ON cool or warm water, then wipe with another soft, clean, OFF dry cloth. Never use water that is hot
Streszczenie treści zawartej na stronie nr. 16
Cleaning the Intake Grille 1. Open the Intake Grille. 4. Set the mounting shaft of the Intake Grille 1Place your fingers at both lower ends of the grille into the bearings at the top of the panel. panel, and lift forward; if the grille seems to catch 1 Pull the Knobs all the way. partway through its movement, continue lifting up- 2 Hold the grille horizontal and set the left and right ward to remove. mounting shafts into the bearings at the top of the 2 Pull past the intermediate catch and ope
Streszczenie treści zawartej na stronie nr. 17
CLEANING AND CARE ÷ Dust can be cleaned from the Air Filter either with a Cleaning the Air Filter vacuum cleaner, or by washing the filter in a solution of mild detergent and warm water. If you wash the filter, 1. Open the Intake Grille, and remove the Air be sure to allow it to dry thoroughly in a shady place before reinstalling. Filter. ÷ If dirt is allowed to accumulate on the Air Filter, air flow Lift up the air filter's handle, disconnect the two lower will be reduced, lowering operating
Streszczenie treści zawartej na stronie nr. 18
TROUBLE SHOOTING In the event of a malfunction (burning smell, etc.), immediately stop operation, disconnect the Power and consult authorized service personnel. WARNING! Merely turning off the unit’s power switch will not completely disconnect the unit from the power source. Always be sure to disconnect the Power or turn off your circuit breaker to ensure that power is completely off. Before requesting service, perform the following checks: Symptom Problem See Page NORMAL Doesn’t operate immedia
Streszczenie treści zawartej na stronie nr. 19
TROUBLE SHOOTING See Page Symptom Items to Check CHECK ONCE Doesn’t operate at all: ÷ Has there been a power failure? MORE –––– ÷ Has a fuse blown out, or a circuit breaker been tripped? 6 ÷ Is the POWER switch set to the OFF position? 9 - 10 ÷ Is the timer operating? Poor Cooling performance: ÷ Is the air filter dirty? ÷ Are the air conditioner’s intake grille or outlet port blocked? ÷ Did you adjust the room temperature settings (thermostat) correctly? –––– ÷ Is there a window or door open? ÷
Streszczenie treści zawartej na stronie nr. 20
OPERATING TIPS Temperature and Humidity Range Cooling and Dry Mode Indoor temperature Maximum 95°F DB / 71°F WB Minimum 64°F DB / 55°F WB Outdoor temperature Maximum 115°F DB Minimum 32°F DB Indoor humidity Outdoor About 80% or less Temperature If the unit is used for long periods under high-humidity conditions, 68°F or above condensation may form on the surface of the indoor unit, and drip onto the floor or other objects underneath. Outdoor About 50% or less Temperature If the unit is used fo
