Streszczenie treści zawartej na stronie nr. 1
®
JVC D-ILA Projector
RS-232C, LAN
and Infrared
Remote Control Guide
FOR MODELS:
●
DLA-HD350 DLA-HD750
● ●
DLA-HD550 DLA-HD950 DLA-HD990
● ●
DLA-X3 DLA-X7 DLA-X9
●
DLA-RS10 DLA-RS20
● ●
DLA-RS15 DLA-RS25 DLA-RS35
● ●
DLA-RS40 DLA-RS50 DLA-RS60
Version 1.3
Contents
Introduction..................................................................................................................2
RS-232C Command Types............................................
Streszczenie treści zawartej na stronie nr. 2
JVC D-ILA Projector Remote Control Guide Introduction This guide provides all of the information required to enable Remote Control of JVC D-ILA projectors, either by RS-232C connection, Infrared Remote Control, or LAN. This will enable Custom Installers or users to remotely control almost every function on these projectors. The RS-232C control codes shown in this guide will control the JVC DLA-HD350, DLA- HD750, DLA-HD550, DLA-HD950, DLA-HD990, DLA-X3, DLA-X7, DLA-X9, DLA-RS10, DLA-RS2
Streszczenie treści zawartej na stronie nr. 3
JVC D-ILA Projector Remote Control Guide Direct Commands: POWER Command Hex Code Power Off 21 89 01 50 57 30 0A Power On 21 89 01 50 57 31 0A INPUT SWITCHING Command Hex Code Input – HDMI 1 21 89 01 49 50 36 0A Input – HDMI 2 21 89 01 49 50 37 0A Input – Component 21 89 01 49 50 32 0A Input – S-Video 21 89 01 49 50 30 0A Input – Video 21 89 01 49 50 31 0A Input – PC 21 89 01 49 50 33 0A (HD750/950/990/X7/X9/RS20/25/35/50/60) Input + (Go to next highest input) 21 89 01 49 50
Streszczenie treści zawartej na stronie nr. 4
JVC D-ILA Projector Remote Control Guide Remote Control Emulation Commands Command Hex Code ASCII Advanced – Direct access to Picture Adjust > Advanced menu (HD550/950/990/X3/X7/X9/ 21 89 01 52 43 37 33 37 33 0A 73 RS15/25/35/40/50/60) Anamorphic – Off (X3/X7/X9/RS40/50/60) (HD350/750/950/990/RS10/20/25/35 – 21 89 01 52 43 37 33 32 34 0A 24 Vertical Stretch – Off) Anamorphic – A (X3/X7/X9/RS40/50/60) (HD350/750/950/990/ RS10/20/25/35 – 21 89 01 52 43 37 33 32 33 0A 23 Vertical Stretch
Streszczenie treści zawartej na stronie nr. 5
JVC D-ILA Projector Remote Control Guide Command Hex Code ASCII Colour Management – Off 21 89 01 52 43 37 33 36 30 0A 60 (HD750/950/ 990/X7/X9/RS20/RS/35/50/60) Colour Management – Custom1 21 89 01 52 43 37 33 36 31 0A 61 (HD750/950/990/X7/X9/RS20/25/35/50/60) Colour Management – Custom2 21 89 01 52 43 37 33 36 32 0A 62 (HD750/950/990/X7/X9/RS20/25/35/50/60) Colour Management – Custom3 21 89 01 52 43 37 33 36 33 0A 63 (HD750/950/990/X7/X9/RS20/25/35/50/60) Colour Management – Cycle
Streszczenie treści zawartej na stronie nr. 6
JVC D-ILA Projector Remote Control Guide Command Hex Code ASCII Contrast + 21 89 01 52 43 37 33 37 38 0A 78 Contrast Adj. (Adjustment Bar On/Off toggle) 21 89 01 52 43 37 33 30 41 0A 0A CTI (Colour Transient Improvement) – Off 21 89 01 52 43 37 33 35 43 0A 5C CTI (Colour Transient Improvement) – Low 21 89 01 52 43 37 33 35 44 0A 5D CTI (Colour Transient Improvement) – Middle 21 89 01 52 43 37 33 35 45 0A 5E CTI (Colour Transient improvement) – High 21 89 01 52 43 37 33 35 46 0A 5F Curso
Streszczenie treści zawartej na stronie nr. 7
JVC D-ILA Projector Remote Control Guide Command Hex Code ASCII Keystone Correction Vertical – 21 89 01 52 43 37 33 31 43 0A 1C Keystone Correction Vertical + 21 89 01 52 43 37 33 31 42 0A 1B Lens Aperture – 1 (HD350/HD550) 21 89 01 52 43 37 33 32 38 0A 28 Lens Aperture – 2 (HD350/HD550) 21 89 01 52 43 37 33 32 39 0A 29 Lens Aperture – 3 (HD350/HD550) 21 89 01 52 43 37 33 32 41 0A 2A Lens Aperture – If Lens Aperture Gauge is not displayed – displays gauge. If Lens Aperture 21 89 01 52 4
Streszczenie treści zawartej na stronie nr. 8
JVC D-ILA Projector Remote Control Guide Command Hex Code ASCII Picture Mode – Cinema3 (HD550/750/990/ RS15/25/35) 21 89 01 52 43 37 33 36 36 0A 66 (X3/X7/X9/RS40/50/60 – Animation Mode) Picture Mode – Dynamic 21 89 01 52 43 37 33 36 42 0A 6B (HD350/550/750/950/990) Picture Mode – Natural 21 89 01 52 43 37 33 36 41 0A 6A Picture Mode – Stage 21 89 01 52 43 37 33 36 37 0A 67 Picture Mode – THX 21 89 01 52 43 37 33 36 46 0A 6F (HD750/950/990/X7/X9/RS20/25/35/50/60) Picture Mode – User
Streszczenie treści zawartej na stronie nr. 9
JVC D-ILA Projector Remote Control Guide Command Hex Code ASCII Shutter – On – Synchronises shutter with “Hide” function (HD550/950/990/X3/X7/X9/ 21 89 01 52 43 37 33 32 43 0A 2C RS15/25/35/40/50/60) Shutter – Open (HD550/950/990/X3/X7/X9/ 21 89 01 52 43 37 33 31 41 0A 1A RS15/25/35/40/50/60) Shutter – Close (HD550/950/990/X3/X7/X9/ 21 89 01 52 43 37 33 31 39 0A 19 RS15/25/35/40/50/60) Test Pattern (cycles through all patterns) 21 89 01 52 43 37 33 35 39 0A 59 THX – Off (X7/X9/RS50/6
Streszczenie treści zawartej na stronie nr. 10
JVC D-ILA Projector Remote Control Guide Converting & Testing Codes The codes shown on pages 3-9 are raw hex codes and must be converted to the appropriate format in order to work with proprietary controllers such as those from Crestron or AMX. To help with the conversion, here are two sample strings for those brands: The Power On Command (from page 3) is: 21 89 01 50 57 31 0A Crestron controller – Power On Command: \x21\x89\x01\x50\x57\x31\x0A\r AMX controller – Power On Command
Streszczenie treści zawartej na stronie nr. 11
JVC D-ILA Projector Remote Control Guide Acknowledgement Response Return Codes - Basic In most installations, it will normally be sufficient just to send a command to the projector and assume that the projector will carry it out requested. In some installations, there may be a requirement to confirm that the projector has carried out the command before continuing. This is particularly important when sending multiple commands. It is possible to check if the projector has carried out a com
Streszczenie treści zawartej na stronie nr. 12
JVC D-ILA Projector Remote Control Guide Acknowledgement Response Return Codes - Advanced For some functions, it is possible to obtain a more detailed response from the projector. This is useful where different actions are required depending on the current projector settings or status. To request the detailed response, taking the above example of the Power Command, send to the projector: 3F 89 01 50 57 0A If the projector receives the enquiry command, as a confirmation that it has r
Streszczenie treści zawartej na stronie nr. 13
JVC D-ILA Projector Remote Control Guide Input Status (to confirm the current Video Input) Enquiry Command (to projector) 3F 89 01 49 50 0A Response (from projector) 06 89 01 49 50 0A 40 89 01 49 50 RR 0A Response (RR) Meaning 30 S-Video 31 Video 32 Component 33 PC (HD750/950/990/X7/X9/RS20/25/35/50/60) 36 HDMI 1 37 HDMI 2 Gamma Table (to confirm the current Gamma Table) Enquiry Command (to projector) 3F 89 01 47 54 0A Response (from projector) 06 89 01 47 54 0A 40 89 01 47 54
Streszczenie treści zawartej na stronie nr. 14
JVC D-ILA Projector Remote Control Guide There is one enquiry command that has a different response from the projector to those listed above. This is the Model Status enquiry. When this enquiry sent to the projector, the projector will respond with a 14-byte string that identifies the model number(s) of the projector. Details are as follows: Model Status (to confirm the current Projector Model) Enquiry Command (to projector) 3F 89 01 4D 44 0A Response (from projector) 06 89 01 4D 44
Streszczenie treści zawartej na stronie nr. 15
JVC D-ILA Projector Remote Control Guide RS-232C Interface Details The RS-232C interface on the projector is a standard 9 pin D-Sub male socket. The pin connections for the projector are as follows: Pin No. Signal Function Signal Direction 2 Rx Data Receive Data Computer/Controller to Projector 3 Tx Data Transmit Data Projector to Computer/Controller 5 Ground Signal ground – 1, 4 & 6-9 No Connection – – Connector Looking at the connector from the side of the projector, the pins
Streszczenie treści zawartej na stronie nr. 16
JVC D-ILA Projector Remote Control Guide Command Format The RS-232C commands are bidirectional and consist of a variable number of hexadecimal numbers. All of the commands sent to the projector shown in this guide are either 7 bytes or 10 bytes long. The Acknowledgement Response Return Codes returned from the projector can be between 6 and 14 bytes long. The basic format of the commands is as follows: Section Size Comments Header 1 byte Can be one of four possible values – see below
Streszczenie treści zawartej na stronie nr. 17
JVC D-ILA Projector Remote Control Guide Local Area Network (LAN) Control (DLA-X7, DLA-X9, DLA-RS50 and DLA-RS60) In addition to RS-232C and Infrared Remote Control, the DLA-X7, DLA-X9, DLA-RS50 and DLA-RS60 also support Local Area Network (LAN) Control. Full instructions on how to use this are below. These instructions assume a basic knowledge of TCP/IP networking. Hardware The LAN control enabled projectors are equipped with a standard RJ45 connection. They can be connected to a L
Streszczenie treści zawartej na stronie nr. 18
JVC D-ILA Projector Remote Control Guide Making And Testing The Connection When the projector is first connected to the LAN, you should test the connection between the PC or controller and the projector to make sure that communication is OK before attempting to send any commands. You can use the standard ICMP “Ping” command for this. Control Software Most LAN compatible Custom Install Control systems that can send hex data should work with the LAN-enabled models. For initial testing
Streszczenie treści zawartej na stronie nr. 19
JVC D-ILA Projector Remote Control Guide Infrared Control It is also possible to control JVC D-ILA projectors via Infrared Remote Control Signal Emulation, though is this sometimes slightly more difficult to achieve than RS-232C control due to the differences in Infrared emulation methods between the various equipment manufacturers. To send an Infrared command to the projector, the required format is 73 in hex, followed by the ASCII value, also in hex, of the command required. The hex
Streszczenie treści zawartej na stronie nr. 20
JVC D-ILA Projector Remote Control Guide This shows both the decimal (115 and 46) as well as the hex (73 and 2E) command numbers and makes it easier to confirm that the correct command has been generated. Using the method above, it is possible to generate any individual Pronto style Long hex command. MakeHex can also generate a range of commands. As an example, the following entries in the .irp file would generate all commands from 22 to 45 (16 to 2D in hex). Device=115 Function=22
