Instrukcja obsługi Pelco DX7100 Series Recovery Instructions

Streszczenie treści zawartej na stronie nr. 1

DX7100 Series
Recovery
Instructions
C1671M (5/05)
Digital Video Recorder
DX7100

Streszczenie treści zawartej na stronie nr. 2

Streszczenie treści zawartej na stronie nr. 3

DX7100 Recovery Procedure The DX7100 recovery procedure describes how to recover your DX7100 software using the DX7100 Recovery CD. To recover DX7100 software using the DX7100 Recovery CD: 1. Insert the DX7100 Recovery CD into the CD-ROM drive of the DX7100 Series digital video recorder (DVR). 2. Turn off the power to the DVR. 3. Count to 10 and then turn the power back on. The boot screen appears. 4. Press the Delete key. The CMOS Setup Utility will open. C1671M (5/05) 3

Streszczenie treści zawartej na stronie nr. 4

5. Scroll down to Advanced BIOS Features, and then press the Enter key. 6. The Advanced BIOS Features dialog box opens. Scroll down to First Boot Device. 4 C1671M (5/05)

Streszczenie treści zawartej na stronie nr. 5

7. Press the Enter key. The First Boot Device dialog box opens. Scroll down to CDROM, and then press the Enter key to make the CD-ROM the first boot device. 8. Repeat steps 6 and 7 for the second and third boot devices. Select SCSI for the second boot device, and select HDD-0 for the third boot device. 9. Press the F10 key to save the changes to the boot devices. 10. A message appears in the center of the screen asking if you want to “SAVE to CMOS and EXIT (Y/N)?” Type Y and then press

Streszczenie treści zawartej na stronie nr. 6

12. A message appears telling you to “Press any key to boot from CD.” Press the Enter key to start the reimaging tool. Wait a few minutes until the Pelco Recovery Tool dialog box opens. 13. If you want to proceed with the recovery process, type YES in the text box, and then click OK. 14. The Ghost 32, Version 8.0 window opens. The Progress Indicator bar near the top of the window shows the progress of the recovery operation. When the bar reaches 100 percent, the DX7100 recorder will reboo

Streszczenie treści zawartej na stronie nr. 7

16. In the CMOS Setup Utility, select Advanced BIOS Features. Press the Enter key. 17. In the First Boot Device dialog box, scroll to HDD-0 and then press the Enter key to make the hard drive the first boot device. 18. Press the F10 key to save the change. 19. A message appears in the center the screen asking if you want to “SAVE to CMOS and EXIT (Y/N)?” Type Y and then press the Enter key. The DX7100 reboots. 20. The DX7100 recovery procedure is complete, and your recorder should be ready

Streszczenie treści zawartej na stronie nr. 8

Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO9001 United States Canada United Kingdom The Netherlands Singapore Spain Scandinavia France Middle East | | | | | | | |