Streszczenie treści zawartej na stronie nr. 1
User Guide
Premium Sound System
(SKYFi3 receiver sold separately)
Important: This manual contains important safety and operating information. Please read, understand,
and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or
damage to your Delphi Premium Sound System, accessories, and/or to your vehicle or property.
Streszczenie treści zawartej na stronie nr. 2
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Warning: To prevent fire or shock hazard, do not expose the Delphi Premium Sound System to rain, moisture or water. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interferen
Streszczenie treści zawartej na stronie nr. 3
Owner’s Record The model number is located below and the serial number is located on the label on the rear of the Delphi Premium Sound System. Record the serial number in the space provided below. Refer to these numbers whenever you call your dealer regarding this product. Model No.: DELPHI SA10221 Serial No.: __________________________________________________
Streszczenie treści zawartej na stronie nr. 4
Delphi Premium Sound System Controls: - + VOL BASS VOL volume down bass boost volume up
Streszczenie treści zawartej na stronie nr. 5
Need help? Call us at 1.877.GO.DELPHI Monday through Friday from 8:00 a.m. - 8:00 p.m. Eastern Time Saturday and Sunday from 10:00 a.m. - 4 :00 p.m Eastern Time Note: Extended seasonal hours may be available. Thank you for purchasing the Delphi Premium Sound System. We’ve designed many thoughtful features into this system to ensure that your level of listening enjoyment is the very best it can be. In the event that you have questions or trouble getting started with your new system, please do
Streszczenie treści zawartej na stronie nr. 6
Table of Contents Contents Welcome............................................................... 3 Using the Delphi Premium Sound System ..... 24 About Delphi ........................................................ 3 Volume................................................................ 24 Bass Boost.......................................................... 24 Getting Started.................................................... 4 Headphones ......................................................
Streszczenie treści zawartej na stronie nr. 7
Welcome Thank you for purchasing the new Delphi Premium Sound System. You are just minutes away from being able to play more than 170 crystal clear channels of live XM® satellite radio on a precisely engineered speaker system. Read the following pages to get started with your new Delphi Premium Sound System. About Delphi Delphi is a world leader in mobile electronics, vehicle components and audio technology. Delphi created the first in-dash car radio in 1936 and continues its strong tradit
Streszczenie treści zawartej na stronie nr. 8
Getting Started What’s In the Box Your Delphi Premium Sound System Kit contains the following components: Items in the box 1. Premium Sound System ® ® ® 2. Radio cradle inserts for Roady XT, MyFi , SKYFi3 and Audiovox® receivers 3. Repeater Antenna Bracket and mounting screws 4. 18 volt power supply with separate cord (not pictured) 5. User Guide (not pictured) 6. Satellite home antenna (included 1 inside the Premium Sound System) 3 2 4
Streszczenie treści zawartej na stronie nr. 9
Getting Started Setting Up the System You can set up your Delphi Premium Sound System by following these steps: 1. Connect the supplied 18-volt DC power adaptor to the jack on the rear of the Delphi Premium Sound System. Plug the other end into the wall outlet. You may also use 8 “C” batteries (not included). 2. The XM Antenna is located under the top cover of the Delphi Premium Sound System. If needed (i.e. unit is placed away from a south facing window or you live in an area without XM
Streszczenie treści zawartej na stronie nr. 10
Getting Started to attach the antenna to the four tabs on the back of the Delphi Premium Sound System. Or you can extend the entire 20’ cable away from the system to improve reception.To reattach the top cover, line up all tabs and then slide the cover toward the front of the unit until a click is heard. Make certain that all tabs are engaged and the rear of the panel is aligned with the rear cover. Installing the Radio Cradle Before installing the cradles, be sure to choose the proper crad
Streszczenie treści zawartej na stronie nr. 11
Getting Started Power Up the System Use the power button on the receiver or on its remote control to turn on the receiver. If the display reads “ANTENNA” after powering up, check that the antenna connection is secure and completely pushed in. Next, change channels (from 0 to 1 or from 1 to 0 if the receiver is not authorized yet). NOTE: Some receivers will power up automatically when installed in the Delphi Premium Sound System. If the “ANTENNA” message remains, power down the radio, unplug
Streszczenie treści zawartej na stronie nr. 12
Getting Started ® Using SKYFi3 with Delphi Premium Sound System 1. Install the SKYFi3 cradle insert onto the Delphi Premium Sound System. Insert the SKYFi3 receiver (sold separately) into the cradle insert included with the Delphi Premium Sound System until snug. Caution: Do not use excessive force when inserting the receiver into the cradle. Doing so could cause damage to the unit. 2. Place the cradle insert containing the SKYFi3 into the cradle by first press- ing in on the back of the bla
Streszczenie treści zawartej na stronie nr. 13
Getting Started 4. If the display reads “NO SIGNAL” after powering up, follow the instruc- tions in “Setting up the Antenna” on page 18. NOTE: Getting started instructions on all receivers are the same with the exception of having to turn on the MyFi on the receiver and adjusting the separate volume control on that receiver as well. 9
Streszczenie treści zawartej na stronie nr. 14
Getting Started ® Using MyFi with Delphi Premium Sound System Special note for MyFi receivers: If you have purchased the MyFi unit, you must turn on the MyFi switch located in the battery compartment of the Premium Sound System. Sliding this switch to “2” position will make the Premium Sound System compatible with MyFi radios. For all other radios this switch should be in “1” position and the Premium Sound System should operate normally. 1) What happens if the Premium Sound System is not s
Streszczenie treści zawartej na stronie nr. 15
Getting Started Switch to “2” position to use your MyFi with the Delphi Premium Sound System. 11
Streszczenie treści zawartej na stronie nr. 16
Getting Started ® Using Roady XT with Delphi Premium Sound System 1. Install the Roady XT cradle onto the Delphi Premium Sound System. Insert the Roady XT Receiver (sold separately) into the adaptor included with the Delphi Premium Sound System until snug. Caution: Do not use excessive force when inserting the receiver into the cradle. Doing so could cause damage to the unit. 2. Insert the adaptor containing the Roady XT into the cradle by pressing in on the back of the black inset cradle i
Streszczenie treści zawartej na stronie nr. 17
Getting Started 4. If the display reads “NO SIGNAL” after powering up, follow the instructions in “Setting up the Antenna” on page 18. 13
Streszczenie treści zawartej na stronie nr. 18
Getting Started ® Using an Audiovox Receiver with Delphi Premium Sound System 1. Install the Audiovox cradle onto the Delphi Premium Sound System. In- sert the Audiovox receiver (sold separately) into the cradle insert included with the system until snug. Caution: Do not use excessive force when inserting the receiver into the cradle. Doing so could cause damage to the unit. 2. Place the cradle insert containing the Audiovox receiver into the cradle by first pressing in on the back of the b
Streszczenie treści zawartej na stronie nr. 19
Getting Started 4. If the display reads “NO SIGNAL” after powering up, follow the instruc- tions in “Setting up the Antenna” on page 18. 15
Streszczenie treści zawartej na stronie nr. 20
Getting Started Using the Delphi Premium Sound System with Batteries The Delphi Premium Sound System can be used with batteries (not included) to allow you to listen to XM outdoors or in other locations without access to an AC power source. Alkaline or rechargeable NiCD batteries are recommended. Battery life will vary depending on how the system is operated and the type of batteries being used. It is recommended that the AC adaptor be the primary power source for the Delphi Premium Sound
