Instrukcja obsługi Bogen CommunicationsHS30EZ

Streszczenie treści zawartej na stronie nr. 1

TM
Easy Design Speaker
Model HS30EZ
Speaker Layout
Figure 1
HORN SPEAKER
START
The layout of the speakers should be planned prior
Row 1
to installation. Desired mounting height, barring
A
C
obstructions, is 15 to 20 feet, with the speakers
angled downward toward the listening area and
Row 2
facing in the same direction.
Layout starts in one corner of the area.The first
B
speaker in Row 1 should be positioned 45 feet
from the corner.The next speaker in Row 1 should
Row 3
be 90 feet from the first

Streszczenie treści zawartej na stronie nr. 2

Speaker Installation STEP 1 - For easier installation, remove the flange (base) Figure 3 from the speaker by unscrewing the wing nut while at the same time pressing inwardly on the wing nut. Place the flange flush with the mounting surface and mark the location of the three holes with either a marker or chisel. It is important that the three holes be exactly aligned with the flange, otherwise you might stress the base or make the connection unsteady. Drill the necessary holes and screw the flang