Instrukcja obsługi JVC CS-WDS1

Streszczenie treści zawartej na stronie nr. 1

Accessories
A Hexagonal head tapping screw B Hexagonal head tapping screw C Protection bar x 4
CAR STEREO SPEAKER
x 16 ( R4 x 30 mm) x 8 ( R4 x 20 mm)
CS-WDS1
Use a M4 hex wrench.
D Paper pattern
For Tweeter
How to use the paper pattern
1. Cut out the paper pattern along the perforation.
2. Place and trace the paper pattern over the mounting
area on the vehicle or board.
For Woofer
3. Cut out the mounting area on the vehicle or board along
the marking.
Specifications
The diaphragm of this spea

Streszczenie treści zawartej na stronie nr. 2

R 3 1 . 5 Mounting Dimensions Unit: mm o Tweeter o Woofer 1 3 4 B 4 5 5 . 5 Mounting area on the vehicle or board Mount the protection bar o Woofer with its straight portion facing Terminal side inwards. A 8 Mounting D area on the vehicle D or board 1 1 . 5 6 9 . 5 The protection bars are 2 6 . 4 o Tweeter provided as protection for the wood cone diaphragm. 4 . 1 4 7 . 4 Please use as necessary. Terminal side Before connecting Connecting the speaker cords • Speaker cords are not suppli