Streszczenie treści zawartej na stronie nr. 1
URC-SR3
Remote Control
Owner’s Manual
Streszczenie treści zawartej na stronie nr. 2
Congratulations! Congratulations on purchasing Universal Remote Control’s URC-SR3 Pre--Programmed and Learning remote control. You now have the power to control your entire home entertainment system with one easy--to--use remote. The URC-SR3 can be used with thousands of TV/DVD components because of the extensive library of codes that have already been programmed into the remote. So... get ready to sit back, relax, and simplify your home entertainment experience. This Owner’s Manual is design
Streszczenie treści zawartej na stronie nr. 3
Table of Contents Getting Started - Overview • Control up to 3 Components........................4 • Component Buttons.....................................4 • Battery Installation ......................................4 • Low Battery Warning ..................................5 • Couch Mode .............................................5 Keypad Layout & Button Functions .........6 Programming URC-SR3 Using Pre-Programmed Codes ..........................7 • Quick Set-Up Method ....................
Streszczenie treści zawartej na stronie nr. 4
Getting Started - Overview Control up to 3 Components The URC-SR3 remote control is designed to control up to three different TV/DVD components and operate virtually all brands of TV, DVD/DVR/VCR, and CABLE/SAT components. Component Buttons Once you have programmed the URC-SR3 for all of your components, all you need to do is press a component button and all the buttons on the URC- SR3 will work with that component. For example, when you press the TV component button, all the buttons on your U
Streszczenie treści zawartej na stronie nr. 5
Low Battery Warning When the batteries are low and need to be replaced the component LED will quickly blink two times when you press the [Power] button. Couch Mode The URC-SR3 is designed to automatically turn itself off if a button is pressed for more than 30 seconds. This prevents battery power from being depleted should the remote accidentally slip between the couch cushions. PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT OUR TECHNICAL SUPPORT CENTER IF YOU NEED ASSISTANCE, E-
Streszczenie treści zawartej na stronie nr. 6
Keypad Layout & Button Functions POWER ALL OFF Allows you to turn the Designed to send Power selected component On/Off commands for up to on and off. three components with one button press. CBL/SAT, TV, DVD Used to select the component you want GUIDE to operate and signals Displays the remote control activity. Program Guide MENU listings through the Cable Set Displays the Top Box. Applications Menu through the Cable CURSOR Set Top Box. NAVIGATION PAD INFO Used for Displays programming informati
Streszczenie treści zawartej na stronie nr. 7
Programming URC-SR3 using Pre-Programmed Codes There are three different ways you can program your URC-SR3 using the component brand codes that are pre-programmed into the remote. One of these will work for you! • Quick Set-Up Method • Three-Digit Code Entry Method • Auto-Search Method * * * TRY THIS FIRST! Quick Set-Up Method STEP 1: Manually or using your old remote, turn on the component you want to program—for example, to program your TV, turn on your TV set. STEP 2: Point the URC-SR3
Streszczenie treści zawartej na stronie nr. 8
IF QUICK SET-UP DID NOT WORK, TRY THIS NEXT: Three-Digit Code Set-Up Method STEP 1: Find the 3-digit code numbers assigned to your brand from the lists in the back of this manual. The codes are listed by component category (i.e., CBL/SAT, TV, DVD/DVR, etc.), then by brand name. For instance, if you would like to locate a code for a Sony television, first locate the TV category and then look for the Sony brand. STEP 2: Once you have located the 3-digit codes for each of the components that you w
Streszczenie treści zawartej na stronie nr. 9
STEP 5: Point the URC-SR3 toward the component (in this example the TV) and punch in the first 3-digit code that you wrote down for that specific component. Use the Number buttons 0–9 on the remote to punch in the code. The TV LED light will blink each time a number is pressed. NUMBER PAD If the 3-digit code number you just punched in is the correct number, the component you are trying to program will turn off. If it did not turn off, enter the next code number from your list until it does tur
Streszczenie treści zawartej na stronie nr. 10
If the Three Digit Code did not work, try this next: Auto-Search Method The Auto-Search Method is a way you can scan through all of the codes in the table to find the right code for your component. STEP 1: Manually or using your old remote, turn on the component you want to program—for example, to program your TV, turn on your TV set. STEP 2: On the URC-SR3, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time.
Streszczenie treści zawartej na stronie nr. 11
STEP 4: Once you have found the right code number and the component has turned off, press the POWER button on the URC-SR3 remote to turn the component back on. Next test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD) to make sure they all work. If any of the buttons do not work properly, you need to find a new code. Continue pressing the UP (or DOWN ) arrow button until you find a new code that turns off the component and makes the VOLUME or PLAY buttons respond correctly.
Streszczenie treści zawartej na stronie nr. 12
If Auto Search did not work, try this: Programming URC-SR3 using the Learning Method STEP 1: Line up the URC-SR3 to the remote control you want to ‘learn’ from, head--to--head as shown below. Make sure the heads are one to two inches apart. STEP 2: On the URC-SR3, press the Component button that you want to program (in this case the button that says TV) and the ENTER [ENT] button at the same time. Hold down both buttons for 2 seconds until the TV Component button light turns on. This signals th
Streszczenie treści zawartej na stronie nr. 13
STEP 5: Once the URC-SR3 has learned all the buttons in the selected component mode, press and hold the Component button and ENTER [ENT] buttons at the same time to save the learned functions. The component LED light will blink three times to confirm the programming. Now test all the buttons to make sure they learned correctly. Repeat Steps 1-5 to program any other component modes. If the Learning Method does not work, here are a few suggestions: • If you have a LCD TV, move to another room.
Streszczenie treści zawartej na stronie nr. 14
Special Advanced Features Programming Automated Activities The URC-SR3 has six Macro buttons (POWER, ALL OFF, A, B, C, D) that are designed to store up to 20 commands in each button. Pressing any one of the Macro buttons, or Automated activity, will send out the series of commands that are stored in that particular button. MacroPower™ Total ALL ON/OFF MacroPower makes several devices work together by pressing one button. Imagine the convenience of turning on your TV, your DVD player and your C
Streszczenie treści zawartej na stronie nr. 15
STEP 2: Press the component button you want to turn on and then the POWER button; repeat for all other components in the order you want them to turn on. The component LED lights will blink once each time you press the POWER button. POWER COMPONENT BUTTONS STEP 3: Once you’ve entered all the Power On commands, press the CHANNEL UP button to save your MacroPower commands. The component LED lights will blink two times to confirm that the programming has been successfully saved. CH SUGGESTION: Mo
Streszczenie treści zawartej na stronie nr. 16
Programming “My Button” Custom Programmable Button Automatically turn on TV to your favorite channel! Always begin watching TV on the channel you like best - you can preset this button with a few simple steps. In cable mode, My BUTTON will automatically turn on TV to your favorite channel. Here’s how to program this feature: STEP 1: Press the CBL button to select the Cable mode. STEP 2: Press the My BUTTON and the SELECT[SEL] button at the same time for 2 seconds until the CBL component LED tur
Streszczenie treści zawartej na stronie nr. 17
Programming “My Favorites” - Favorite Channel Buttons In Cable mode, the A, B, C, D buttons are also designed to serve as dedicated Favorite Channel buttons. Each button will access one of your favorite channels with just one button press. Here’s how to program Favorite Channels: STEP 1: Press the CBL button to select the Cable mode. STEP 2: Press the ‘A’, ‘B’, ‘C’ or ‘D’ button and the SELECT[SEL] button at the same time for 2 seconds until the CBL component LED turns on. IMPORTANT: You have
Streszczenie treści zawartej na stronie nr. 18
More Favorite Channels You can also use the "A, B, C and D" buttons to program favorite channels. Each button can pro- gram up to 5 favorite channels (or a total of 20 button presses), but you're not limited to using these buttons for only that. You can record any series of button presses into a macro. This is great switching video or audio sources. Here is an example of how to program a macro on the "A" button with three favorite channels. We'll use "25, 50, and 75." STEP 1: Press the device y
Streszczenie treści zawartej na stronie nr. 19
SimpleSound™ Total System Volume Control SimpleSound is one of the most exciting features of the URC-SR3. It gives you total volume control over ALL the components in your system, even those that do not have built--in volume control, such as TIVO, DVD and DVR. SimpleSound saves you the hassle and inconvenience of constantly switching between component modes just to control volume. First you should identify which device in your system will be used to deliver sound. In a basic system, the sound
Streszczenie treści zawartej na stronie nr. 20
STEP 2: Press the VOLUME UP button and then press either the TV component button that you want to use for volume. The Component LED light will blink two times to confirm that it is saved. This sets up three buttons (Volume Up, Volume Down and MUTE) as a group for that component. VOLUME UP Repeat Steps 1-2 for all other components. Note: SimpleSound is what’s technically referred to as a “Punch Through” feature and is not limited to volume control. It can also be applied to other groups of butt
