Instrukcja obsługi Dual Electronics Corporation SG3

Streszczenie treści zawartej na stronie nr. 1

SG3/SG4
INSTALLATION/OWNER'S MANUAL
Universal  Marine  Splash  Guard

Streszczenie treści zawartej na stronie nr. 2

SG3/SG4  INSTALLATION Preparation Protect your marine head unit from damage and the harsh marine environment with the SG3/SG4 splash guard. This marine grade cover fits most single DIN size head units and will protect against splashes and debris. Before  You  Start • Disconnect negative battery terminal. Consult a qualified marine technician or service manual for instructions. • Due to differences in head units, it is recommended to temporarily mount head unit in splash guard before insta

Streszczenie treści zawartej na stronie nr. 3

SG3/SG4  INSTALLATION  Mounting Mounting • Open splashguard and detach side covers by pulling outward from the inside of side cover. • Insert supplied mounting bolts through washers and into mounting holes as shown below. • Place gasket between back side of splash guard and mounting surface and secure the splash guard in place with supplied nuts. • Install head unit into splash guard opening. This may vary depending on head unit manufacturer and installation instructions. Refer to head unit

Streszczenie treści zawartej na stronie nr. 4

SG3/SG4  WARRANTY Limited  One  Year  Warranty This warranty gives you specific legal rights. You What  to  do? 1. Before you call for service, check the may also have other rights which vary from state to state. troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may Dual Electronics Corp. warrants this product to save you a service call. the original purchaser to be free from defects in material and workmanship for a period of one year 2. If you requ