Streszczenie treści zawartej na stronie nr. 1
CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
KD-G401
KD-G401
• This unit is equipped with the display demonstration. To cancel it, see page 6.
• Dieses Gerät ist mit einer Demonstrationsfunktion für das Display ausgestattet. Auf
Seite 6 wird beschrieben, wie Sie diese Demonstrationsfunktion deaktivieren können.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler,
référez-vous à la page 6.
• Dit toestel heeft een display-demonstratiefunctie. Zie bladzijde
Streszczenie treści zawartej na stronie nr. 2
IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT. How to reset your unit While holding SEL (select), press (standby/on attenuator) for more than 2 seconds. This
Streszczenie treści zawartej na stronie nr. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 MP3 INTRODUCTION ...................... 23 How to use the MODE button ................... 2 What is MP3?............................................ 23 How are MP3 files recorded and played LOCATION OF THE BUTTONS ............ 4 back? .....
Streszczenie treści zawartej na stronie nr. 4
LOCATION OF THE BUTTONS Control panel Display window KD-G401 1 (standby/on attenuator) button s∞ (down) button 2 SEL (select) button –10 button 3 FM/AM button 4 CD button Display window 5 Loading slot d Tuner reception indicators 6 Display window MO (monaural), ST (stereo) 70 (eject) button f RDS indicators 8 TP PTY (traffic programme/programme type) TP, PTY, AF, REG button g MP3 indicator 9 Remote sensor h CD indicator • You can control this unit with an optionally j Playback mode/item indicato
Streszczenie treści zawartej na stronie nr. 5
BASIC OPERATIONS 1 3 2 Turning on the power 4 Adjust the sound as you want. (See pages 28 and 29.) 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. When you select a source in step 2 below, the To resume the previous volume level, press the power automatically comes on. You do not have button briefly again. to press this button to turn on
Streszczenie treści zawartej na stronie nr. 6
Canceling the display 3 Select “DEMO OFF.” demonstration When shipped from the factory, display DEMO OFF DEMO ON demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. • It is recommended to cancel the display demonstration before you use the unit for the first time. To cancel the display demonstration, follow the procedure below: 4 Finish the setting. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears
Streszczenie treści zawartej na stronie nr. 7
Setting the clock 5 Finish the setting. You can also set the clock system to either 24 hours or 12 hours. 1 Press and hold SEL (select) for more than 2 seconds so that one of the To check the current clock time or change the PSM items appears on the display. display mode (PSM: see page 31.) Press DISP (display) repeatedly. Each time you press the button, the display changes as follows: • During AM and FM non-RDS station 2 Set the hour. operation: 1 Select “CLOCK H” (hour) if not shown on the dis
Streszczenie treści zawartej na stronie nr. 8
RADIO OPERATIONS Listening to the radio 2 Start searching for a station. To search for stations of You can use either automatic searching or manual higher frequencies searching to tune in to a particular station. To search for stations of lower frequencies Searching for a station automatically: Auto search When a station is received, searching stops. 1 Select the band (FM1 – 3, AM). To stop searching before a station is Each time you press the received, press the same button you have button, the
Streszczenie treści zawartej na stronie nr. 9
Searching for a station manually: When an FM stereo broadcast is hard to Manual search receive 1 Press MODE to enter the functions mode while listening 1 Select the band (FM1 – 3, AM). to an FM stereo broadcast. Each time you press the button, the band changes as 2 Press MO (monaural), while follows: “MODE” is still flashing on the display, so that “MONO” FM1 FM2 FM3 AM appears on the display. Each time you press the button, monaural mode turns on and off Note: alternately. This receiver has thr
Streszczenie treści zawartej na stronie nr. 10
Local FM stations with the strongest signals are Storing stations in memory searched and stored automatically in the band number you have selected (FM1, FM2, or FM3). You can use one of the following two methods to These stations are preset in the number store broadcasting stations in memory. buttons—No.1 (lowest frequency) to No.6 • Automatic preset of FM stations: SSM (Strong- (highest frequency). station Sequential Memory) When automatic preset is over, the station stored • Manual preset of b
Streszczenie treści zawartej na stronie nr. 11
Tuning in to a preset station 3 Press and hold the number button (in this example, 1) for more than You can easily tune in to a preset station. 2 seconds. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 10 and 11. 1 Select the band (FM1 – 3, AM). Each time you press the button, the band changes as follows: FM1 FM2 FM3 AM Preset number flashes for a while. 4 Repeat the above procedure to store 2 Select the number (1 – 6) for
Streszczenie treści zawartej na stronie nr. 12
RDS OPERATIONS To use Network-Tracking Reception What you can do with RDS You can select the different modes of network- RDS (Radio Data System) allows FM stations to tracking reception to continue listening to the send an additional signal along with their regular same programme in its finest reception. programme signals. For example, the stations When shipped from the factory, “AF” is selected. send their station names, as well as information about what type of programme they broadcast, • AF:
Streszczenie treści zawartej na stronie nr. 13
Using TA Standby Reception 1 Press and hold SEL (select) for more than 2 seconds so that one of the TA Standby Reception allows the unit to switch PSM items appears on the display. temporarily to Traffic Announcement (TA) from the current source (another FM station or CD). (PSM: see page 31.) • TA Standby Reception will not work if you are listening to an AM station. Press TP PTY to activate TA Standby Reception. 2 Select “AF-REG” (alternative frequency/regionalization reception) if not shown on
Streszczenie treści zawartej na stronie nr. 14
Using PTY Standby Reception 4 Finish the setting. PTY Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) from the current source (another FM station or CD). • PTY Standby Reception will not work if you are 7 When the current source is FM, the PTY listening to an AM station. indicator either lights up or flashes. • If the PTY indicator lights up, PTY Standby You can select your favorite programme type for Reception is activated. PTY Standby Re
Streszczenie treści zawartej na stronie nr. 15
Searching your favorite programme 3 Press and hold the number button for more than 2 seconds to store the You can search any one of the PTY codes. In addition, you can store your 6 favorite PTY code selected into the preset programme types in the number buttons. number you want. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To store your favorite programme types, see below. To search for your favorite programme type, see page 16.
Streszczenie treści zawartej na stronie nr. 16
To search for your favorite programme type 3 Press ¢ or 4 to start PTY search for your favorite programme. 1 Press and hold TP PTY for more than 2 seconds while listening to an FM station. • If there is a station broadcasting a programme The last selected PTY code appears. of the same PTY code as you selected, that station is tuned in. • If there is no station broadcasting a 2 To select one of your favorite programme of the same PTY code as you programme type selected, the station will not cha
Streszczenie treści zawartej na stronie nr. 17
Setting the TA volume level Other convenient RDS You can preset the volume level for TA Standby functions and adjustments Reception. When a traffic programme is received, the volume level automatically changes to the Automatic selection of the station preset level. when using the number buttons • See also “Changing the general settings (PSM)” on page 30. Usually when you press the number button, the preset station is tuned in. 1 Press and hold SEL (select) for more than However, when the preset
Streszczenie treści zawartej na stronie nr. 18
PTY codes NEWS: News SOCIAL: Programmes on social AFFAIRS: Topical programmes expanding activities on current news or affairs RELIGION: Programmes dealing with any INFO: Programmes which impart aspect of belief or faith, or the advice on a wide variety of topics nature of existence or ethics SPORT: Sport events PHONE IN: Programmes where people can EDUCATE: Educational programmes express their views either by DRAMA: Radio plays phone or in a public forum CULTURE: Programmes on national or TRAVEL
Streszczenie treści zawartej na stronie nr. 19
CD OPERATIONS Refer “MP3 OPERATIONS” on pages 24 to 27 for Notes: operating MP3 discs. • When a CD is inserted upside down, “EJECT” appears on the display and the CD automatically ejects. Playing a CD • If there is no CD in the loading slot, you cannot select CD as the source. “NO DISC” appears on Insert a CD into the loading slot. the display. The unit turns on, draws • If the current disc is a CD Text, disc title/performer the CD and starts and then track title will automatically appear. playb
Streszczenie treści zawartej na stronie nr. 20
To go to a track quickly (+10 and –10 buttons) Locating a track or a 1 Press MODE to enter the functions mode particular portion on a CD while playing a CD. To fast-forward or reverse the track Press and hold ¢ , while playing a CD, to fast-forward the track. 2 Press +10 or –10. To skip 10 tracks* forwards Press and hold 4, while playing a CD, to to the last track reverse the track. To skip 10 tracks* backwards to the first track To go to the next or previous tracks * First time you press +10 o
