Streszczenie treści zawartej na stronie nr. 1
CASSETTE RECEIVER
CASSETTEN-RECEIVER
RADIOCASSETTE
RADIO/CASSETTESPELER
KS-LX200R
BAND
SCM MONO LOCAL INT RPT RND
SEL MODE ATT DISP SOURCE RDS TP PTY OFF
78 9 S S 10 11 12
M
KS-LX200R
For installation and connections, refer to the separate manual.
Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung.
Pour l’installation et les raccordements, se référer au manuel séparé.
Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het
toestel
Streszczenie treści zawartej na stronie nr. 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS LOCATION OF THE BUTTONS ............ 3 EXTERNAL COMPONENT OPERATIONS29 Playing an external component.............. 29 Front panel ............................................ 3 Remote controller .................................. 4 Using a subwoofer ................................. 29 Preparing
Streszczenie treści zawartej na stronie nr. 3
LOCATION OF THE BUTTONS Front panel Cassette compartment Display window 2 1 Control panel* y 0
3 4 5 6 7 8 9 p q w e r t *The control panel slides out when you press ON/CLOSE . 1 +/– button 8 DISP (display) button • Also functions as SSM buttons when pressed 2 ¢ / 4 button together with the MODE ATT button. • ¢ / 4 also functions as ON or CLOSE button. 9 SOURCE button 3 SEL (select) button • Also functions as BAND or 23. 4 SCM (sound control memory) button p TP (traffic programme) RDS (radio
Streszczenie treści zawartej na stronie nr. 4
3 • Functions as the PRESET button while Remote controller listening to the radio (or the DAB tuner.) Each time you press the button, the preset station (or service) number increases, and the selected station (or service) is tuned in. 5 • Functions as the DISC – button while listening 6 1 to the CD changer. Each time you press the button, the disc 2 number decreases, and the selected disc starts 7 playing. 3 4 Functions the same as the +/– button on the main unit. NOTE: This button does not func
Streszczenie treści zawartej na stronie nr. 5
3. Return the battery holder. Preparing the remote controller Insert again the battery holder pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote (back side) sensor on the main unit. Make sure there is no obstacle in between. Remote sensor WARNING: B • Store the batteries in a place which children cannot reach. If a child accidentally swallows the batteries, • Do not expose the remote sensor to strong light immediatel
Streszczenie treści zawartej na stronie nr. 6
BASIC OPERATIONS 1 3 2 3 Adjust the volume. Turning on the power Press + to increase the volume. 1 Turn on the power. The display illuminates and Press – to decrease the volume. the control panel comes out. 2 Select the source. Each time you press the Volume level meter button, the source changes as follows: 4 Adjust the sound as you want (see page 18.) = FM = DAB tuner** = Tape* = CD changer** = External component To drop the volume in a moment = AM = (back to the beginning) Press MODE ATT for
Streszczenie treści zawartej na stronie nr. 7
RADIO BASIC OPERATIONS BAND SCM MONO LOCAL MODE DISP SOURCE TP PTY INT RPT RND SEL 78 9 ATT S RDS 10 11 12 OFF M S 0 R To tune in FM stations only with strong signals Listening to the radio 1 Press MODE ATT. “MODE” appears on the display, and the number You can use either automatic searching or manual buttons can work as different function buttons. searching to tune into a particular station. 2 Press LOCAL, while “MODE” is still on the display, so that the LOCAL indicator lights up on the Search
Streszczenie treści zawartej na stronie nr. 8
3 Tune into a station you want while Storing stations in memory “MANU” is flashing. You can use one of the following two methods to store broadcasting stations in memory. Press ¢ to tune into stations of higher frequencies. • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) Press 4 to tune into • Manual preset of both FM and AM stations stations of lower frequencies. FM station automatic preset: SSM • If you release your finger from the button, You can preset 6 local FM
Streszczenie treści zawartej na stronie nr. 9
Manual preset Tuning into a preset station You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. You can easily tune into a preset station. Remember that you must store stations first. If you Ex: Storing an FM station of 88.3 MHz into the have not stored them yet, see “Storing stations in preset number 1 of the FM1 band memory” on page 8. 1 Select the band (FM1). 1 Select the band (FM1–3, AM). 1 Press SOURCE (BAND) 1 Press SOURCE (BAND) to to select FM as the select FM or
Streszczenie treści zawartej na stronie nr. 10
RDS OPERATIONS To use Network-Tracking Reception, press and What you can do with RDS EON hold TP RDS (Traffic Programme/Radio Data System) for more than 1 second. Each time you RDS (Radio Data System) allows FM stations to press and hold the button, Network-Tracking send an additional signal along with their regular Reception modes change as follows: programme signals. For example, the stations send Mode 1 Mode 2 Mode 3 their station names, as well as information about what type of programme the
Streszczenie treści zawartej na stronie nr. 11
To deactivate the TA standby mode, press The same programme can be received on TP RDS again. different frequencies. Programme 1 broadcasting PTY Standby Reception Programme 1 on frequency A broadcasting When you press PTY while listening to on frequency E an FM station, the PTY indicator is lit during reception of a PTY station and the PTY standby mode is engaged. The selected PTY name stored on page 12 flashes for 5 seconds. Programme 1 • When the station being received is not a PTY station, br
Streszczenie treści zawartej na stronie nr. 12
Selecting your favorite programme for 4 Press SEL (select) to finish the setting. PTY Standby Reception You can select your favorite programme for PTY Standby Reception to store in memory. When shipped from the factory, “NEWS” is stored as the programme type for PTY Standby Reception. Searching your favorite programme You can search one of your 6 favorite programme 1 Press and hold SEL (select) for more types stored in memory. than 2 seconds so that one of the PSM When shipped from the factory,
Streszczenie treści zawartej na stronie nr. 13
4 Press and hold the number button for Other convenient RDS functions more than 2 seconds to store the PTY and adjustments code selected into the preset number you want. Automatic selection of the station when using the number buttons Usually when you press the number button, the preset station is tuned in. However, when the preset station is an RDS station, PTY preset number appears, and selected something different will happen. If the signals from code name and “MEMORY” alternate on the that p
Streszczenie treści zawartej na stronie nr. 14
Changing the display mode while Automatic clock adjustment listening to an FM station When shipped from the factory, the clock built in this unit is set to be readjusted automatically using You can change the initial indication on the display the CT (Clock Time) data in the RDS signal. to either station name (PS NAME) or to station If you do not want to use automatic clock frequency (FREQ), while listening to an FM RDS adjustment, follow the procedure below. station. • See also “Changing the gen
Streszczenie treści zawartej na stronie nr. 15
ON ON CLOSE CLOSE TAPE OPERATIONS BAND SCM MONO LOCAL MODE TP INT RPT RND SEL 78 9 ATT S DISP SOURCE RDS PTY 10 11 12 OFF S M 0 R To stop play and eject the cassette Listening to a tape Press 0 OFF briefly. Tape play stops and the cassette automatically 1 Open the cassette compartment. ejects from the cassette compartment. The source 0 changes to the previously selected one. If you change the source, the tape play also stops (without ejecting the cassette this time). • You can eject the cassette
Streszczenie treści zawartej na stronie nr. 16
Finding the beginning of a tune To play back tapes recorded with the Dolby B NR Multi Music Scan allows you to automatically start 1 Press MODE ATT. playback from the beginning of a specified tune. “MODE” appears on the display. You can specify up to 9 tunes ahead of or before the current tune. During playback while “MODE” is still on the 2 Press MO/ Specify how many tunes ahead of or display so that the indicator lights up, before the current tune the one you want and “DOLBY B” appears on the
Streszczenie treści zawartej na stronie nr. 17
Playing the current tune repeatedly Other convenient tape functions You can play the current tune repeatedly (Repeat Play). Skipping the blank portions on the tape You can skip blank portions between the tunes 1 Press MODE ATT while playing a (Blank Skip). tape. When this function is on, the unit skips blank “MODE” appears on the display. portions of 15 seconds or more, fast-forwards to the next tune, then starts playing it. • See also “Changing the general settings (PSM)” on page 21. 2 Press RP
Streszczenie treści zawartej na stronie nr. 18
SOUND ADJUSTMENTS 2 Adjust the level. Adjusting the sound Press + to increase the level. You can adjust the sound characteristics to your preference. Press – to decrease the level. 1 Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: BAS TRE FAD BAL (bass) (treble) (fader) (balance) Equalization pattern changes as you adjust VOL BBE WOOFER the bass or treble. (volume) Indication To do: Range BAS Adjust the bass. –06 (min.) Note: | Norma
Streszczenie treści zawartej na stronie nr. 19
II What is BBE ? Using the Sound Control II The BBE * function restores the brilliance and clarity Memory of the original live sound in recording, broadcasts, etc. You can select and store a preset sound adjustment When a speaker reproduces sound, it introduces suitable for each playback source frequency-dependent phase shifting, causing high- (Advanced SCM.) frequency sounds to take longer to reach the ear II than low frequency sounds. The BBE function Once you select a sound mode, it is stored
Streszczenie treści zawartej na stronie nr. 20
Indication For: Preset values 3 Select the item you want to adjust II Bass Treble BBE II (BAS, TRE, or BBE ). BEAT Rock or disco +02 00 2 music SOFT Quiet +01 –03 OFF background 4 Adjust the selected item. music POP Light music +04 +01 OFF SCM OFF (Flat sound) 00 00 2 Notes: • You can adjust each sound mode to your preference, 5 Repeat steps 3 and 4 to adjust the and store it in memory. other items. If you want to adjust and store your original sound mode, see “Storing your own sound adjustments
