Streszczenie treści zawartej na stronie nr. 1
RX-N600D
RX-N600D_B_cv.fm Page 1 Tuesday, May 16, 2006 4:54 PM
B
RX-N600D
AV Receiver
© 2006 All rights reserved.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312
Streszczenie treści zawartej na stronie nr. 2
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual WARNING carefully. Keep it in a safe place for future reference. TO REDUCE THE RISK OF FIRE OR ELECTRIC 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN dust, moisture, and/or cold. Allow ventilation space of at OR MOISTURE
Streszczenie treści zawartej na stronie nr. 3
BASIC SOUND FIELD ADDITIONAL ADVANCED OPERATION PROGRAMS INFORMATION INTRODUCTION PREPARATION OPERATION CONTENTS FM/AM TUNING..................................................46 INTRODUCTION Automatic tuning ..................................................... 46 Manual tuning.......................................................... 47 FEATURES............................................................. 2 Automatic preset tuning........................................... 48 GETTING STARTED.
Streszczenie treści zawartej na stronie nr. 4
FEATURES FEATURES Built-in 6-channel power amplifier Network features ◆ Minimum RMS output power ◆ LAN port to connect a PC and YAMAHA MCX-2000 or (20 Hz to 20 kHz, 0.06% THD, 8 Ω ) access the Internet radio via a LAN Front: 95 W + 95 W ◆ DHCP automatic or manual network configuration Center: 95 W USB features Surround: 95 W + 95 W ◆ USB port to connect a USB memory device or a USB portable Surround back: 95 W audio player Sound field programs Other features ◆ Proprietary YAMAHA technology for
Streszczenie treści zawartej na stronie nr. 5
INTRODUCTION GETTING STARTED GETTING STARTED Supplied accessories Installing batteries in the remote control Check that you received all of the following parts. Remote control AM loop antenna 1 3 CODE SET TRANSMIT POWER POWER STANDBY POWER TV AV MD SLEEP CD CD-R CBL MULTI CH IN DVD DTV TUNER DOCK USB V-AUX DVR NET AMP 2 SOURCE TV VOL TV CH VOLUME TV TV MUTE TV INPUT MUTE STEREO MUSIC ENTERTAIN MOVIE 1 2 3 4 Indoor FM antenna STANDARD SELECT EXTD SUR. DIRECT ST. 5 6 7 8 SPEAKERS ENHANCER NIGHT S
Streszczenie treści zawartej na stronie nr. 6
CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel 14 2 356 78 90 A VOLUME ZONE 2 ZONE ON/OFF CONTROL MASTER PRESET/TUNING FM/AM A/B/C/D/E l PRESET/TUNING h MEMORY TUNING MODE MAN'L/AUTO FM AUTO/MAN'L EDIT NEXT LEVEL SEARCH MODE DAB DISPLAY ON OFF PROGRAM INPUT MAIN ZONE PHONES SPEAKERS A B STRAIGHT TONE CONTROL INPUT MODE MULTI CH INPUT VIDEO AUX USB ON/OFF VIDEO L AUDIO R EFFECT SILENT CINEMA BC DEH F G IJ K L M 1 MASTER ON/OFF 6 PRESET/TUNING l / h, LEVEL Turns on or off this u
Streszczenie treści zawartej na stronie nr. 7
INTRODUCTION CONTROLS AND FUNCTIONS 8 TUNING MODE (AUTO/MAN’L), DISPLAY E STRAIGHT (EFFECT) Switches between automatic tuning (the AUTO Turns the sound field programs off or on. When the indicator is turned on) and manual tuning (the AUTO “STRAIGHT” mode is selected, 2-channel or multi- indicator is turned off) when this unit is in the FM/AM channel input signals are output directly from their tuning mode (see page 46). respective speakers without effect processing (see Displays various i
Streszczenie treści zawartej na stronie nr. 8
CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the ■ Controlling this unit remote control used to control this unit. To operate other Set the component selector switch to AMP to control this components, see “REMOTE CONTROL FEATURES” on unit. page 96. 1 Infrared window Outputs infrared control signals. Aim this window at the Note component you want to operate (see page 8). The operation mode of the remote control buttons in the shaded area below
Streszczenie treści zawartej na stronie nr. 9
INTRODUCTION CONTROLS AND FUNCTIONS 0 TRANSMIT indicator H STRAIGHT (EFFECT) Flashes while the remote control is sending infrared Turns the sound field programs off or on. When the signals. “STRAIGHT” mode is selected, 2-channel or multi- channel input signals are output directly from their A STANDBY respective speakers without effect processing (see Sets this unit to the standby mode (see page 28). page 39). Note I NIGHT Turns on or off the night listening modes (see page 34). This button is
Streszczenie treści zawartej na stronie nr. 10
CONTROLS AND FUNCTIONS ■ Controlling the TUNER ■ Using the remote control (FM/AM and DAB) functions The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote Set the component selector switch to SOURCE and then control sensor on this unit during operation. press TUNER to select “TUNER” as the input source. Press BAND repeatedly to switch the reception band between FM, AM and DAB. 456Numeric buttons Use numbers 1 through 8 to select pr
Streszczenie treści zawartej na stronie nr. 11
INTRODUCTION CONTROLS AND FUNCTIONS Front panel display 13 2 4 56 7 89D 0ABC E pNET 96 pDVR pV-AUX pDTV/CBL pDVD pMD/CD-R pTUNER pCD t VOLUME 24 USB DOCK AUTO TUNED STEREO MEMORY MATRIX DISCRETE DAB SECONDARY DRC PRESET VIRTUAL SILENT CINEMA SP STANDARD A B ZONE2 NIGHT HiFi DSP PTY HOLD PS PTY RT CT EON SLEEP dB ENHANCER MUTE 96/24 DUAL q EX q DIGITAL LFE ft LC R q PL x q PL q PL mS SL SB SR PCM dB F GK HIL J M N O P Q R S 1 Decoder indicators 9 AUTO indicator The respective indicator lights up
Streszczenie treści zawartej na stronie nr. 12
CONTROLS AND FUNCTIONS I Headphones indicator Lights up when headphones are connected. J ZONE2 indicator Lights up when Zone 2 is turned on (see page 102). K NIGHT indicator Lights up when you select a night listening mode (see page 34). L HiFi DSP indicator Lights up when you select a HiFi DSP sound field program (see page 72). M Multi-information display Shows the name of the current sound field program and other information when adjusting or changing settings. N Radio Data System indicator
Streszczenie treści zawartej na stronie nr. 13
INTRODUCTION CONTROLS AND FUNCTIONS Rear panel 1 2 3 45 6 7 8 9 0 AUDIO AUDIO MULTI CH INPUT OUTPUT DIGITAL DIGITAL INPUT DOCK LAN OUTPUT CENTER MD/CD-R MD/CD-R DVD DTV/CBL DVD Y PB PR Y PB PR IN MD/ OUT SUB SUB SURROUND WOOFER WOOFER OPTICAL OPTICAL COAXIAL CD (PLAY) CD-R (REC) FRONT ZONE 2 DVD DVR DTV/ CBL IN OUT IN OUT DAB DVD DTV/CBL DVR MONITOR DVD DTV/CBL DVR MONITOR MONITOR OUT 75 Ω UNBAL. OUT OUT COMPONENT VIDEO VIDEO S VIDEO TUNER SPEAKERS FM ANT FRONT SURROUND AM 75Ω ANT GND UNBAL. AC
Streszczenie treści zawartej na stronie nr. 14
CONNECTIONS CONNECTIONS Placing speakers * The speaker layout below shows the standard ITU-R Front left and right speakers (FL and FR) speaker setting. You can use it to enjoy CINEMA DSP and The front speakers are used for the main source sound plus multi-channel audio sources. effect sounds. Place these speakers at an equal distance from the ideal listening position. The distance of each * ITU-R is the radio communication sector of the ITU speaker from each side of the video monitor should
Streszczenie treści zawartej na stronie nr. 15
PREPARATION CONNECTIONS Connecting speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION Before connecting the speakers, make sure that this unit is turned off (see page 28). Do not let the bare speaker wires touch each other or do not let them touch any met
Streszczenie treści zawartej na stronie nr. 16
CONNECTIONS FRONT terminals ■ Connecting the speaker cable Connect one or two sets of front speakers (1, 2) to these terminals. If you use only one front speaker system, 1 Remove approximately 10 mm of insulation connect it to the FRONT A or B terminal. from the end of each speaker cable and then twist the exposed wires of the cable together CENTER terminals to prevent short circuits. Connect a center speaker (3) to these terminals. SURROUND terminals Connect surround speakers (4, 5) to the
Streszczenie treści zawartej na stronie nr. 17
PREPARATION CONNECTIONS Information on jacks and cable plugs Audio jacks and cable plugs Video jacks and cable plugs COMPONENT VIDEO AUDIO DIGITAL AUDIO DIGITAL AUDIO VIDEO S VIDEO Y PB PR L R COAXIAL OPTICAL (White) (Red) (Orange) (Yellow) (Green) (Blue) (Red) S O V PB PR Y L R C Left and right Coaxial Optical Composite S-video Component analog audio digital audio digital video cable cable plug video cable cable plugs cable plug audio cable plug plugs plug ■ Audio jacks ■ Video jacks This un
Streszczenie treści zawartej na stronie nr. 18
CONNECTIONS Audio and video signal flow ■ Audio signal flow for AUDIO OUT (REC) Input Output AUDIO OUT (REC) DIGITAL AUDIO COAXIAL Digital audio DIGITAL AUDIO OPTICAL L R L R Analog audio AUDIO Digital output Analog output Note This unit handles digital and analog signals independently. Thus, audio signals input at the analog jacks are output only at the analog AUDIO OUT (REC) jacks. Likewise, audio signals input at the DIGITAL INPUT (OPTICAL or COAXIAL) jacks are output only at the DIGITAL OU
Streszczenie treści zawartej na stronie nr. 19
PREPARATION CONNECTIONS Connecting a TV Connect your TV to the VIDEO MONITOR OUT jack, the S VIDEO MONITOR OUT jack or the COMPONENT VIDEO MONITOR OUT jacks of this unit. CAUTION Do not connect this unit or other components to the AC power supply until all connections between components are complete. Y PB PR MONITOR OUT MONITOR MONITOR OUT OUT COMPONENT VIDEO VIDEO S VIDEO S Y PB PR V S-video in Component video in Video in TV 17 En
Streszczenie treści zawartej na stronie nr. 20
CONNECTIONS Connecting a DVD player, a DVD recorder, a VCR or an STB Connect your DVD player, DVD recorder, VCR or STB (set-top box) using the same type of video connections as those made for your TV (see page 17). The cable TV receiver and the satellite receiver are examples of the STB. CAUTION Do not connect this unit or other components to the AC power supply until all connections between components are complete. Notes When “VIDEO CONV.” is set to “OFF” (see page 92), be sure to make the
