Instrukcja obsługi Bogen CommunicationsCMP1R

Streszczenie treści zawartej na stronie nr. 1

Block Diagram
CMP1R
Compressor Limiter
Output Module
Features
• Threshold control
• Compressor ratio
• Make-up gain
• Bypass switch
• Unbalanced input
• Gradual fade back from mute
Printed in Korea. 0112
© 2001 Bogen Communications, Inc.
50 Spring Street, Ramsey, NJ 07446, U.S.A.
54-2068-01R1
Specifications subject to change without notice.
Tel. 201-934-8500; Fax: 201-934-9832; www.bogen.com

Streszczenie treści zawartej na stronie nr. 2

Module Installation Jumper Selections 1. Turn off all power to the unit. Priority Level 2. Make all necessary jumper selections. Jumper placement only affects the unbalanced input signal.The jumper placement determines whether the module’s input can be 3. Position module in front of desired output module bay muted by other input modules.When enabled, the input is per- opening, making sure that the module is right-side up. manently set to the lowest priority level. Output modules will not fit in

Streszczenie treści zawartej na stronie nr. 3

Block Diagram CMP1R Compressor Limiter Output Module Features • Threshold control • Compressor ratio • Make-up gain • Bypass switch • Unbalanced input • Gradual fade back from mute Printed in Korea. 0112 © 2001 Bogen Communications, Inc. 50 Spring Street, Ramsey, NJ 07446, U.S.A. 54-2068-01R1 Specifications subject to change without notice. Tel. 201-934-8500; Fax: 201-934-9832; www.bogen.com