Instrukcja obsługi Rolls Compressor/Limiter/Gate CL151 GLC

Streszczenie treści zawartej na stronie nr. 1

The plug connected to the Tip is the "Send" which will connect to the Input of the signal
CL151 GLC
processing device, and the Ring is the "Return" which connects directly to the detector
(compression control) circuit.
Compressor/Limiter/
Side Chain circuits are often used in "ducking". Ducking is momentarily lowering one sig-
nal under another signal. For example, you may wish to automatically lower a music signal
Gate
under a paging microphone signal, then have the music return to normal le

Streszczenie treści zawartej na stronie nr. 2

INTRODUCTION CONNECTION AND OPERATION Thank you for your purchase of the CL151 GLC Gate Compressor Limiter. This unit pro- The example below shows the connection of a microphone. If the microphone requires phantom power, make sure the Phantom Power jumper is connecting the two pins closest vides smooth, soft-knee compression and limiting with a gate. Gain reduction is indicated to the front panel. Connect the output of the CL151 via a balanced or unbalanced 1/4" via a front panel 5-segment L