Streszczenie treści zawartej na stronie nr. 1
Owner's
Manual
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not followed.
Keep others and pets away
from equipment when in use.
Always make sure all bolts and
nuts are tightened prior to
each use.
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS Page Page Safety Instructions 2 Maintenance 14 Before You Begin 4 Conditioning Guidelines 15 Warm-up and Cool-Down 16 Equipment Warning & Notice Labels 5 Hardware Identification Chart 6 Warranty 17 Product Parts Drawing 18 Assembly Instructions 7 Parts List 19 Set Up Instructions 11 Notes 21 Operational Instructions 12 Fax/Mail Ordering Form 22 Storage 14 SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following Safety Instructions before using
Streszczenie treści zawartej na stronie nr. 3
CALL US FIRST Customer Service 1(800) 375-7520 www.staminaproducts.com THANK YOU FOR PURCHASING THE Magnetic Fusion 4545 Bike To help you get started, we have pre-assembled most of your Magnetic Fusion 4545 Bike at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual. With regular workouts, you will be getting your body into shape and be on your way to achieving a happier and healthier lifes
Streszczenie treści zawartej na stronie nr. 4
BEFORE YOU BEGIN Thank you for choosing the Magnetic Fusion 4545 Although Stamina constructs its products with the Bike. We take great pride in producing this quality finest materials and uses the highest standards of product and hope it will provide many hours of quality manufacturing and quality control, there can exercise to make you feel better, look better, and sometimes be missing parts or incorrectly sized enjoy life to its fullest. parts. If you have any questions or problems with I
Streszczenie treści zawartej na stronie nr. 5
EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the Magnetic Fusion 4545 Bike. Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size W1 WARNING LABEL(85) 5
Streszczenie treści zawartej na stronie nr. 6
HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. Place the washers or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws. 3/16" 1/4" 5/16" 3/8" 1/2" INCHES 02 1/2 1 1/2 1/2 3 1/2 4 1/2 5 1/2 6 in. mm. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 length MILLIMETERS 6 8 10 12 NOTICE: The length of all bolts and screws, except those w
Streszczenie treści zawartej na stronie nr. 7
ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at customerservice@staminaproducts.com. STEP 1 Attach the FRONT STABILIZER(2), the short on
Streszczenie treści zawartej na stronie nr. 8
ASSEMBLY INSTRUCTIONS B. A. (Assembled at the factory) NOTE: Be careful not to damage the WIRES(38, 39, and 40) when attaching the HANDRAIL(6) and the SEAT FRAME(5). STEP 4 Refer to illustration A. Attach the HANDRAIL(6) to the SEAT FRAME(5) with CARRIAGE BOLTS (M8x1.25x45mm)(56), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and ACORN NUTS(M8x1.25) (75). STEP 5 Refer to illustration B. Slide the SEAT FRAME(5) onto the REAR FRAME(3) and lock in position with the ADJUSTMENT KNOB(50). Attach the STOP
Streszczenie treści zawartej na stronie nr. 9
ASSEMBLY INSTRUCTIONS STEP 6 Refer to the inset drawing. Plug the LEFT and RIGHT PULSE SENSOR WIRES(39, 40) into the REAR EXTENSION WIRE(38) located on the REAR FRAME(3). Push the plugs, only the plugs, back into the opening in the REAR FRAME(3). Press the SQUARE PLUG(46) into the slot in the back of the REAR FRAME(3) allowing the LEFT and RIGHT PULSE SENSOR WIRES(39, 40) to feed through the opening created in the slot below the SQUARE PLUG(46). Please note that the slot is bigger than the SQUAR
Streszczenie treści zawartej na stronie nr. 10
ASSEMBLY INSTRUCTIONS STEP 8 NOTE: The RIGHT PEDAL(36) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(36) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(35) has L stamped on the end of the pedal shaft. The LEFT PEDAL(35) has left hand threads and is tightened by turning counterclockwise. Thread the RIGHT PEDAL(36) into the right side of the CRANK(7) as shown. Tighten the pedal securely. Do the same to attach the LEFT PEDAL(35) to the left side of the C
Streszczenie treści zawartej na stronie nr. 11
SET UP INSTRUCTIONS Place the Magnetic Fusion 4545 Bike in the area where it will be used. It is recommended that the Magnetic Fusion 4545 Bike be placed on an equipment mat. The Magnetic Fusion 4545 Bike is approximately 57 3/4 inches long x 24 3/8 inches wide x 43 3/4 inches tall (max.). (These dimensions may vary up to one inch.) An area 4 feet wide x 7 feet long is required for safe operation of the Magnetic Fusion 4545 Bike. Make sure that adequate space is available for access to and passa
Streszczenie treści zawartej na stronie nr. 12
OPERATIONAL INSTRUCTIONS SEAT ADJUSTMENT Proper seat adjustment is important. There are twelve adjustment holes in the REAR FRAME(3). These adjustment holes allow users to adjust the position of the seat for efficient exercise. 1. Rotate the ADJUSTMENT KNOB(50) counterclockwise until the pin releases when the knob is pulled. Pull the ADJUSTMENT KNOB(50) and slide the SEAT FRAME(5) up or down to desired position. Lock the SEAT FRAME(5) in position by inserting the pin of the ADJUSTMENT KNOB(50) i
Streszczenie treści zawartej na stronie nr. 13
OPERATIONAL INSTRUCTIONS USING THE FITNESS MONITOR OR METER POWER ON : Pedal movement or push the MODE button. POWER OFF : Automatic shut off after four minutes of inactivity. MODE BUTTON: Press to select display functions, include SCAN, TIME, SPEED, DISTANCE, CALORIES, and HEART RATE. Press and hold for three seconds to reset all functions to zero. FUNCTIONS: SCAN: Automatically scans each function of TIME, SPEED, DISTANCE, CALORIES, and HEART RATE in sequence with change every four seconds. P
Streszczenie treści zawartej na stronie nr. 14
STORAGE 1. To store the Magnetic Fusion 4545 Bike, simply keep it in a clean dry place. 2. Adjust the SEAT FRAME(5) to the lowest position. The Magnetic Fusion 4545 Bike is approximately 57 3/4 inches long x 24 3/8 inches wide x 35 7/8 inches tall (max.). These dimensions will vary. Please measure your Magnetic Fusion 4545 Bike if exact dimensions are needed. 3. To move the Magnetic Fusion 4545 Bike, lift the REAR STABILIZER(4) and the bike will roll on the WHEELS(52) on the FRONT STABILIZER(2).
Streszczenie treści zawartej na stronie nr. 15
CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive for several years or are severely overweight, start slowly and increase your workout time gradually. Increase your workout intensity gradually by monitoring your heart rate while you exercise. Remember to follow these essentials: Have your doctor review your training and diet programs. Begin your training program slowly with realistic goals that have been set by you and your
Streszczenie treści zawartej na stronie nr. 16
WARM-UP and COOL-DOWN Warm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump rope, and running in place Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength or aerobic training se
Streszczenie treści zawartej na stronie nr. 17
LIMITED WARRANTY MODEL 15-4545 WARRANTY Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship under normal use, service and proper operation for a period of 90 days on the parts and three years on the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REP
Streszczenie treści zawartej na stronie nr. 18
PRODUCT PARTS DRAWING FRONT BACK 18
Streszczenie treści zawartej na stronie nr. 19
PARTS LIST PART# PART NAME QTY 1 Front Frame 1 2 Front Stabilizer 1 3 Rear Frame 1 4 Rear Stabilizer 1 5 Seat Frame 1 6 Handrail 1 7 Crank 1 8 Bearing Housing 2 9 Ball Bearing 2 10 Inside Bearing Collar 1 11 Outside Bearing Collar 1 12 Bearing Washer 1 13 Bearing Snap Washer 1 14 Bearing Nut 2 15 Pulley 1 16 V-Ribbed Belt 1 17 Idler Arm 1 18 Idler Wheel 1 19 Idler Wheel Spacer 1 20 Tension Spring 1 21 Magnetic Unit 1 22
Streszczenie treści zawartej na stronie nr. 20
PARTS LIST PART# PART NAME QTY 48 Back Cushion 1 49 Bushing 2 50 Adjustment Knob 1 51 Stopper 4 52 Wheel 2 53 Leveling Cap 2 54 Stand 1 55 Rectangular Plug (30mm x 60mm) 3 56 Carriage Bolt (M8 x 1.25 x 45mm) 2 57 Carriage Bolt (M8 x 1.25 x 75mm) 4 58 Bolt, Button Head (M8 x 1.25 x 40mm) 2 59 Bolt, Button Head (M10 x 1.5 x 15mm) 6 60 Bolt, Hex Head (M8 x 1.25 x 80mm) 2 61 Bolt, Round Head (M6 x 1 x 15mm) 7 62 Bolt, Flat Head (M8 x 1.25 x 20mm) 1 6
