Streszczenie treści zawartej na stronie nr. 1
Jumbo Weather Clock
with Wireless
Indoor/Outdoor
Thermometer
USER MANUAL
(RCW33W)
1 1
Streszczenie treści zawartej na stronie nr. 2
INTRODUCTION PRODUCT OVERVIEW MAIN UNIT Thank you for selecting the Honeywell Jumbo Weather Clock with FEATURES Wireless Indoor/Outdoor Thermometer. • Jumbo LCD display This device includes weather forecast with • Wireless sensor transmits temperature to the main unit from up to 100 feet away pressure trend, precise time keeping and • Indoor and Remote Temperature display temperature monitoring features that you can use • Weather forecast in 5 large graphic icons: from the comfort of your
Streszczenie treści zawartej na stronie nr. 3
A WEATHER CLOCK IN TWO - LINE LCD DISPLAY Shows the weather forecast with trend, indoor/outdoor temperature and calendar clock. B MODE BUTTON 1). Toggles between 2 display modes: SECONDS setting and WEEKDAY. 2). Sets the year, date and time. C “UP” BUTTON A 1). Increases the setting. 2). Enables Atomic Clock. 3). Enables Time Zone selection. D “DOWN” BUTTON 1). Decreases the setting. 2). Enables remote sensor signal search. E BATTERY COMPARTMENTS Accommodate
Streszczenie treści zawartej na stronie nr. 4
A LED INDICATOR REMOTE SENSOR 1). Flashes once when the remote sensor transmits the reading to the main unit. FEATURES 2). Flashes twice indicating low battery. • Remote temperature transmission to the main unit via 433 MHz signal B BATTERY COMPARTMENT • Case can be wall mounted using built-in hanger Holds two AA-size batteries. • 100 feet transmission range without interference • LCD display of measured temperature C RESET • Temperature display unit (C°or F°) selection
Streszczenie treści zawartej na stronie nr. 5
BEFORE YOU BEGIN BATTERY INSTALLATION: 1. We recommend using alkaline batteries for the main unit MAIN UNIT and remote sensor. 1. Open the battery compartment door. 2. Avoid using rechargeable batteries. 2. Install two batteries (UM-3 or “AA” size 1.5V) matching 3. Insert batteries before first use, matching the polarity as the polarity as shown in the battery compartment. shown in the battery compartment. 3. Replace the battery compartment door. 4. Always install batteries in th
Streszczenie treści zawartej na stronie nr. 6
READING THE KINETIC WAVE DISPLAY OUTDOOR TEMPERATURE TREND The kinetic wave display shows the main unit (receiver) signal The temperature trend indicator shows the trend of temperatures reception strength. collected at particular remote sight. There are three trends will be shown: rising, steady, and falling. The unit is in searching mode WEATHER FORECAST The weather station is capable of detecting pressure changes. Temperature readings are Based on collected data, it forecasts the weather for t
Streszczenie treści zawartej na stronie nr. 7
3. The path between units is clear of obstacles. Shorten the 3. If after 8 minutes the time signal has not been received, distance between units if necessary. press the “MODE” button to set the time manually. 4. Fresh batteries are installed correctly in both remote sensor The clock will continue to search for the WWVB time and main unit. signal daily from 1:00 am to 4:30 am. Note: When the temperature falls below freezing, the When the signal has been successfully received, the t
Streszczenie treści zawartej na stronie nr. 8
SPECIFICATIONS FCC STATEMENT Temperature Measurement This device complies with Part 15 of the FCC Rules. Main unit Operation is subject to the following two conditions: Indoor Temperature (1) This device may not cause harmful interference, and Proposed operating range : -5.0°C to +50.0°C / (2) This device must accept any interference received, 23.0°F to 122.0°F including interference that may cause undesired operation. Temperature resolution : 0.1°C/ 0.2°F Warning: Changes
Streszczenie treści zawartej na stronie nr. 9
DECLARATION OF CONFORMITY STANDARD WARRANTY INFORMATION This product is warranted from the manufacturing defects for We one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, Name: Hideki Electronics, Inc. commercial use, or unauthorized adjustment and repair. Address: 7865 SW Mohawk, Tualatin, OR 97062 Telephone No.: 1-503-612-8395 Note that online product registration is required to ensure valid warranty protection. declare that the pro
